lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1476413995-20361-2-git-send-email-peter.chen@nxp.com>
Date:   Fri, 14 Oct 2016 10:59:48 +0800
From:   Peter Chen <peter.chen@....com>
To:     <gregkh@...uxfoundation.org>, <stern@...land.harvard.edu>,
        <ulf.hansson@...aro.org>, <broonie@...nel.org>, <sre@...nel.org>,
        <robh+dt@...nel.org>, <shawnguo@...nel.org>, <dbaryshkov@...il.com>
CC:     <heiko@...ech.de>, <linux-arm-kernel@...ts.infradead.org>,
        <p.zabel@...gutronix.de>, <devicetree@...r.kernel.org>,
        <pawel.moll@....com>, <mark.rutland@....com>,
        <linux-usb@...r.kernel.org>, <arnd@...db.de>,
        <s.hauer@...gutronix.de>, <mail@...iej.szmigiero.name>,
        <troy.kisky@...ndarydevices.com>, <festevam@...il.com>,
        <oscar@...andei.net>, <stephen.boyd@...aro.org>,
        <linux-pm@...r.kernel.org>, <stillcompiling@...il.com>,
        <linux-kernel@...r.kernel.org>, <mka@...omium.org>,
        <vaibhav.hiremath@...aro.org>, Peter Chen <peter.chen@....com>
Subject: [PATCH v8 1/8] binding-doc: power: pwrseq-generic: add binding doc for generic power sequence library

Add binding doc for generic power sequence library.

Signed-off-by: Peter Chen <peter.chen@....com>
Acked-by: Philipp Zabel <p.zabel@...gutronix.de>
Acked-by: Rob Herring <robh@...nel.org>
---
 .../bindings/power/pwrseq/pwrseq-generic.txt       | 48 ++++++++++++++++++++++
 1 file changed, 48 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/power/pwrseq/pwrseq-generic.txt

diff --git a/Documentation/devicetree/bindings/power/pwrseq/pwrseq-generic.txt b/Documentation/devicetree/bindings/power/pwrseq/pwrseq-generic.txt
new file mode 100644
index 0000000..ebf0d47
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/pwrseq/pwrseq-generic.txt
@@ -0,0 +1,48 @@
+The generic power sequence library
+
+Some hard-wired devices (eg USB/MMC) need to do power sequence before
+the device can be enumerated on the bus, the typical power sequence
+like: enable USB PHY clock, toggle reset pin, etc. But current
+Linux device driver lacks of such code to do it, it may cause some
+hard-wired devices works abnormal or can't be recognized by
+controller at all. The power sequence will be done before this device
+can be found at the bus.
+
+The power sequence properties is under the device node.
+
+Optional properties:
+- clocks: the input clocks for device.
+- reset-gpios: Should specify the GPIO for reset.
+- reset-duration-us: the duration in microsecond for assert reset signal.
+
+Below is the example of USB power sequence properties on USB device
+nodes which have two level USB hubs.
+
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_otg1_id>;
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	genesys: hub@1 {
+		compatible = "usb5e3,608";
+		reg = <1>;
+
+		clocks = <&clks IMX6SX_CLK_CKO>;
+		reset-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; /* hub reset pin */
+		reset-duration-us = <10>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+		asix: ethernet@1 {
+			compatible = "usbb95,1708";
+			reg = <1>;
+
+			clocks = <&clks IMX6SX_CLK_IPG>;
+			reset-gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; /* ethernet_rst */
+			reset-duration-us = <15>;
+		};
+	};
+};
-- 
2.7.4

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ