| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20161018015636.11701-12-stephen.boyd@linaro.org>
Date: Mon, 17 Oct 2016 18:56:24 -0700
From: Stephen Boyd <stephen.boyd@...aro.org>
To: linux-usb@...r.kernel.org
Cc: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-arm-msm@...r.kernel.org, Andy Gross <andy.gross@...aro.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Neil Armstrong <narmstrong@...libre.com>,
Arnd Bergmann <arnd@...db.de>, Felipe Balbi <balbi@...nel.org>,
Peter Chen <peter.chen@....com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Subject: [PATCH v5 11/23] usb: chipidea: Emulate OTGSC interrupt enable path
In the case of an extcon-usb-gpio device being used with the
chipidea driver we'll sometimes miss the BSVIS event in the OTGSC
register. Consider the case where we don't have a cable attached
and the id pin is indicating "host" mode. When we plug in the usb
cable for "device" mode a gpio goes high and indicates that we
should do the role switch and that vbus is high. When we're in
"host" mode the OTGSC register doesn't have BSVIE set.
The following scenario can happen:
CPU0
----
<extcon notifier chain>
ci_cable_notifier()
update id cable state
ci_irq()
if (ci->is_otg && (otgsc & OTGSC_IDIE) && (otgsc & OTGSC_IDIS)) { // true
ci->id_event = true;
ci_otg_queue_work()
schedule()
<extcon notifier event> // same task as before
ci_cable_notifier()
update vbus cable state
ci_irq()
if (ci->is_otg && (otgsc & OTGSC_BSVIE) && (otgsc & OTGSC_BSVIS)) // false
return IRQ_NONE
ci_otg_work() // switch task to the workqueue now
if (ci->id_event)
ci_handle_id_switch()
ci_role_stop()
host_stop()
hw_wait_vbus_lower_bsv(ci); // this times out because vbus is already set
ci_role_start()
udc_id_switch_for_device()
hw_write_otgsc(ci, OTGSC_BSVIS | OTGSC_BSVIE, OTGSC_BSVIS | OTGSC_BSVIE);
At this point, we don't replay the vbus connect event because the
vbus event has already happened. This causes things like gadget
instances to never see vbus appear, and thus the gadget is never
started. Furthermore, we see timeout messages like:
timeout waiting for 0000800 in OTGSC
Let's workaround this by skiping the wait for BSV when we're
using an extcon for the vbus notification and let's properly
emulate the BSVIS event that would happen when we enable the
vbus interrupt while enabling "device" mode.
Cc: Peter Chen <peter.chen@....com>
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Signed-off-by: Stephen Boyd <stephen.boyd@...aro.org>
---
drivers/usb/chipidea/ci.h | 2 ++
drivers/usb/chipidea/core.c | 23 +++++++++++++++++------
drivers/usb/chipidea/otg.c | 31 ++++++++++++++++++++++++-------
3 files changed, 43 insertions(+), 13 deletions(-)
diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h
index 59e22389c10b..e099b8bc79e2 100644
--- a/drivers/usb/chipidea/ci.h
+++ b/drivers/usb/chipidea/ci.h
@@ -437,6 +437,8 @@ static inline void ci_ulpi_exit(struct ci_hdrc *ci) { }
static inline int ci_ulpi_resume(struct ci_hdrc *ci) { return 0; }
#endif
+irqreturn_t __ci_irq(int irq, struct ci_hdrc *ci);
+
u32 hw_read_intr_enable(struct ci_hdrc *ci);
u32 hw_read_intr_status(struct ci_hdrc *ci);
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index 83bc2f2dd6a8..d1ae9a03e0fa 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -524,9 +524,8 @@ int hw_device_reset(struct ci_hdrc *ci)
return 0;
}
-static irqreturn_t ci_irq(int irq, void *data)
+irqreturn_t __ci_irq(int irq, struct ci_hdrc *ci)
{
- struct ci_hdrc *ci = data;
irqreturn_t ret = IRQ_NONE;
u32 otgsc = 0;
@@ -570,9 +569,20 @@ static irqreturn_t ci_irq(int irq, void *data)
return IRQ_HANDLED;
}
- /* Handle device/host interrupt */
- if (ci->role != CI_ROLE_END)
- ret = ci_role(ci)->irq(ci);
+ return ret;
+}
+
+static irqreturn_t ci_irq(int irq, void *data)
+{
+ irqreturn_t ret;
+ struct ci_hdrc *ci = data;
+
+ ret = __ci_irq(irq, ci);
+ if (ret == IRQ_NONE) {
+ /* Handle device/host interrupt */
+ if (ci->role != CI_ROLE_END)
+ ret = ci_role(ci)->irq(ci);
+ }
return ret;
}
@@ -586,7 +596,8 @@ static int ci_cable_notifier(struct notifier_block *nb, unsigned long event,
cbl->connected = event;
cbl->changed = true;
- ci_irq(ci->irq, ci);
+ __ci_irq(ci->irq, ci);
+
return NOTIFY_DONE;
}
diff --git a/drivers/usb/chipidea/otg.c b/drivers/usb/chipidea/otg.c
index 695f3fe3ae21..f4a21ade1901 100644
--- a/drivers/usb/chipidea/otg.c
+++ b/drivers/usb/chipidea/otg.c
@@ -84,36 +84,44 @@ u32 hw_read_otgsc(struct ci_hdrc *ci, u32 mask)
void hw_write_otgsc(struct ci_hdrc *ci, u32 mask, u32 data)
{
struct ci_hdrc_cable *cable;
+ bool raise_irq = false;
cable = &ci->platdata->vbus_extcon;
if (!IS_ERR(cable->edev)) {
- if (data & mask & OTGSC_BSVIS)
- cable->changed = false;
-
/* Don't enable vbus interrupt if using external notifier */
if (data & mask & OTGSC_BSVIE) {
+ if (cable->enabled == false && cable->changed == true)
+ raise_irq = true;
cable->enabled = true;
data &= ~OTGSC_BSVIE;
} else if (mask & OTGSC_BSVIE) {
cable->enabled = false;
}
+
+ if (data & mask & OTGSC_BSVIS && !raise_irq)
+ cable->changed = false;
}
cable = &ci->platdata->id_extcon;
if (!IS_ERR(cable->edev)) {
- if (data & mask & OTGSC_IDIS)
- cable->changed = false;
-
/* Don't enable id interrupt if using external notifier */
if (data & mask & OTGSC_IDIE) {
+ if (cable->enabled == false && cable->changed == true)
+ raise_irq = true;
cable->enabled = true;
data &= ~OTGSC_IDIE;
} else if (mask & OTGSC_IDIE) {
cable->enabled = false;
}
+
+ if (data & mask & OTGSC_IDIS && !raise_irq)
+ cable->changed = false;
}
hw_write(ci, OP_OTGSC, mask | OTGSC_INT_STATUS_BITS, data);
+
+ if (raise_irq)
+ __ci_irq(ci->irq, ci);
}
/**
@@ -175,7 +183,16 @@ static void ci_handle_id_switch(struct ci_hdrc *ci)
ci_role_stop(ci);
- if (role == CI_ROLE_GADGET)
+ /*
+ * BSV could be set "immediately" if we're using extcon for
+ * VBUS because sometimes it's a single GPIO for ID and VBUS
+ * like in the case of extcon-usb-gpio. In that case we ignore
+ * waiting for a BSV transition. Really we can't tell when BSV
+ * is low and the cable is connected, all we know is that the
+ * BSV is high when we update BSV state.
+ */
+ if (role == CI_ROLE_GADGET &&
+ IS_ERR(ci->platdata->vbus_extcon.edev))
/*
* wait vbus lower than OTGSC_BSV before connecting
* to host
--
2.10.0.297.gf6727b0
Powered by blists - more mailing lists