linux-kernel - [PATCH v2 2/9] dt-bindings: interrupt-controller: add DT binding for meson GPIO interrupt controller

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1476890480-8884-3-git-send-email-jbrunet@baylibre.com>
Date:   Wed, 19 Oct 2016 17:21:13 +0200
From:   Jerome Brunet <jbrunet@...libre.com>
To:     Carlo Caione <carlo@...one.org>,
        Kevin Hilman <khilman@...libre.com>,
        Thomas Gleixner <tglx@...utronix.de>,
        Jason Cooper <jason@...edaemon.net>,
        Marc Zyngier <marc.zyngier@....com>,
        Rob Herring <robh+dt@...nel.org>
Cc:     Jerome Brunet <jbrunet@...libre.com>,
        linux-amlogic@...ts.infradead.org,
        linux-arm-kernel@...ts.infradead.org, linux-gpio@...r.kernel.org,
        linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
        Linus Walleij <linus.walleij@...aro.org>,
        Catalin Marinas <catalin.marinas@....com>,
        Will Deacon <will.deacon@....com>,
        Russell King <linux@...linux.org.uk>
Subject: [PATCH v2 2/9] dt-bindings: interrupt-controller: add DT binding for meson GPIO interrupt controller


This commit adds the device tree bindings description for Amlogic's GPIO
interrupt controller available on the meson8, meson8b and gxbb SoC families

Signed-off-by: Jerome Brunet <jbrunet@...libre.com>
---
Rob, I did not include the Ack you gave for the RFC as bindings have slightly
changed. Only the interrupt property has be removed following a discussion I
had with Marc

 .../amlogic,meson-gpio-intc.txt                    | 31 ++++++++++++++++++++++
 1 file changed, 31 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt

diff --git a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
new file mode 100644
index 000000000000..2464d9a0865d
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
@@ -0,0 +1,31 @@
+Amlogic meson GPIO interrupt controller
+
+Meson SoCs contains an interrupt controller which is able watch the SoC pads
+and generate an interrupt on edges or level. The controller is essentially a
+256 pads to 8 GIC interrupt multiplexer, with a filter block to select edge
+or level and polarity. We don’t expose all 256 mux inputs because the
+documentation shows that upper part is not mapped to any pad. The actual number
+of interrupt exposed depends on the SoC.
+
+Required properties:
+
+- compatible : should be either
+   "amlogic,meson8-gpio-intc” for meson8 SoCs (AML7826MX) or
+   “amlogic,meson8b-gpio-intc” for meson8b SoCs (S805) or
+   “amlogic,meson-gxbb-gpio-intc” for GXBB SoCs (S905)
+- interrupt-parent : a phandle to the GIC the interrupts are routed to.
+   Usually this is provided at the root level of the device tree as it is
+   common to most of the SoC
+- reg : Specifies base physical address and size of the registers.
+- interrupt-controller : Identifies the node as an interrupt controller.
+- #interrupt-cells : Specifies the number of cells needed to encode an
+   interrupt source. The value must be 2.
+
+Example:
+
+gpio_interrupt: interrupt-controller@...0 {
+	compatible = "amlogic,meson-gxbb-gpio-intc";
+	reg = <0x0 0x9880 0x0 0x10>;
+	interrupt-controller;
+	#interrupt-cells = <2>;
+};
-- 
2.7.4