| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1476844107-31087-6-git-send-email-chunfeng.yun@mediatek.com>
Date: Wed, 19 Oct 2016 10:28:24 +0800
From: Chunfeng Yun <chunfeng.yun@...iatek.com>
To: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Felipe Balbi <felipe.balbi@...ux.intel.com>,
Mathias Nyman <mathias.nyman@...el.com>,
Matthias Brugger <matthias.bgg@...il.com>
CC: Oliver Neukum <oneukum@...e.com>,
Alan Stern <stern@...land.harvard.edu>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Sergei Shtylyov <sergei.shtylyov@...entembedded.com>,
Pawel Moll <pawel.moll@....com>,
Kumar Gala <galak@...eaurora.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Alan Cooper <alcooperx@...il.com>,
Chunfeng Yun <chunfeng.yun@...iatek.com>,
<linux-usb@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-mediatek@...ts.infradead.org>
Subject: [PATCH v7, 5/8] usb: mtu3: Super-Speed Peripheral mode support
add super-speed funtion for peripheral mode
Signed-off-by: Chunfeng Yun <chunfeng.yun@...iatek.com>
---
drivers/usb/mtu3/mtu3.h | 13 ++-
drivers/usb/mtu3/mtu3_core.c | 202 ++++++++++++++++++++++++++++++++----
drivers/usb/mtu3/mtu3_gadget.c | 45 +++++---
drivers/usb/mtu3/mtu3_gadget_ep0.c | 90 ++++++++++++++++
drivers/usb/mtu3/mtu3_hw_regs.h | 33 ++++++
5 files changed, 346 insertions(+), 37 deletions(-)
diff --git a/drivers/usb/mtu3/mtu3.h b/drivers/usb/mtu3/mtu3.h
index ad1a133..41a0473 100644
--- a/drivers/usb/mtu3/mtu3.h
+++ b/drivers/usb/mtu3/mtu3.h
@@ -53,6 +53,7 @@
#define USB_QMU_TQSAR(epnum) (U3D_TXQSAR1 + (((epnum) - 1) * 0x10))
#define USB_QMU_TQCPR(epnum) (U3D_TXQCPR1 + (((epnum) - 1) * 0x10))
+#define SSUSB_U3_CTRL(p) (U3D_SSUSB_U3_CTRL_0P + ((p) * 0x08))
#define SSUSB_U2_CTRL(p) (U3D_SSUSB_U2_CTRL_0P + ((p) * 0x08))
#define MTU3_DRIVER_NAME "mtu3"
@@ -63,6 +64,7 @@
#define MTU3_EP_WEDGE BIT(2)
#define MTU3_EP_BUSY BIT(3)
+#define MTU3_U3_IP_SLOT_DEFAULT 2
#define MTU3_U2_IP_SLOT_DEFAULT 1
/**
@@ -87,6 +89,7 @@ enum mtu3_speed {
MTU3_SPEED_INACTIVE = 0,
MTU3_SPEED_FULL = 1,
MTU3_SPEED_HIGH = 3,
+ MTU3_SPEED_SUPER = 4,
};
/**
@@ -190,6 +193,7 @@ struct mtu3_ep {
struct list_head req_list;
struct mtu3_gpd_ring gpd_ring;
+ const struct usb_ss_ep_comp_descriptor *comp_desc;
const struct usb_endpoint_descriptor *desc;
int flags;
@@ -208,7 +212,8 @@ struct mtu3_request {
/**
* struct mtu3 - device driver instance data.
- * @slot: MTU3_U2_IP_SLOT_DEFAULT for U2 IP
+ * @slot: MTU3_U2_IP_SLOT_DEFAULT for U2 IP only,
+ * MTU3_U3_IP_SLOT_DEFAULT for U3 IP
* @may_wakeup: means device's remote wakeup is enabled
* @is_self_powered: is reported in device status and the config descriptor
* @ep0_req: dummy request used while handling standard USB requests
@@ -242,12 +247,16 @@ struct mtu3 {
struct usb_gadget_driver *gadget_driver;
struct mtu3_request ep0_req;
u8 setup_buf[EP0_RESPONSE_BUF];
+ u32 max_speed;
unsigned is_active:1;
unsigned may_wakeup:1;
unsigned is_self_powered:1;
unsigned test_mode:1;
unsigned softconnect:1;
+ unsigned u1_enable:1;
+ unsigned u2_enable:1;
+ unsigned is_u3_ip:1;
u8 address;
u8 test_mode_nr;
@@ -324,7 +333,7 @@ int mtu3_config_ep(struct mtu3 *mtu, struct mtu3_ep *mep,
void mtu3_ep0_setup(struct mtu3 *mtu);
void mtu3_start(struct mtu3 *mtu);
void mtu3_stop(struct mtu3 *mtu);
-void mtu3_hs_softconn_set(struct mtu3 *mtu, bool enable);
+void mtu3_dev_on_off(struct mtu3 *mtu, int is_on);
int mtu3_gadget_setup(struct mtu3 *mtu);
void mtu3_gadget_cleanup(struct mtu3 *mtu);
diff --git a/drivers/usb/mtu3/mtu3_core.c b/drivers/usb/mtu3/mtu3_core.c
index 33d21dd..f9817ad 100644
--- a/drivers/usb/mtu3/mtu3_core.c
+++ b/drivers/usb/mtu3/mtu3_core.c
@@ -72,8 +72,20 @@ static void ep_fifo_free(struct mtu3_ep *mep)
__func__, mep->fifo_seg_size, mep->fifo_size, start_bit);
}
+/* enable/disable U3D SS function */
+static inline void mtu3_ss_func_set(struct mtu3 *mtu, bool enable)
+{
+ /* If usb3_en==0, LTSSM will go to SS.Disable state */
+ if (enable)
+ mtu3_setbits(mtu->mac_base, U3D_USB3_CONFIG, USB3_EN);
+ else
+ mtu3_clrbits(mtu->mac_base, U3D_USB3_CONFIG, USB3_EN);
+
+ dev_dbg(mtu->dev, "USB3_EN = %d\n", !!enable);
+}
+
/* set/clear U3D HS device soft connect */
-void mtu3_hs_softconn_set(struct mtu3 *mtu, bool enable)
+static inline void mtu3_hs_softconn_set(struct mtu3 *mtu, bool enable)
{
if (enable) {
mtu3_setbits(mtu->mac_base, U3D_POWER_MANAGEMENT,
@@ -92,6 +104,13 @@ static int mtu3_device_enable(struct mtu3 *mtu)
u32 check_clk = 0;
mtu3_clrbits(ibase, U3D_SSUSB_IP_PW_CTRL2, SSUSB_IP_DEV_PDN);
+
+ if (mtu->is_u3_ip) {
+ check_clk = SSUSB_U3_MAC_RST_B_STS;
+ mtu3_clrbits(ibase, SSUSB_U3_CTRL(0),
+ (SSUSB_U3_PORT_DIS | SSUSB_U3_PORT_PDN |
+ SSUSB_U3_PORT_HOST_SEL));
+ }
mtu3_clrbits(ibase, SSUSB_U2_CTRL(0),
(SSUSB_U2_PORT_DIS | SSUSB_U2_PORT_PDN |
SSUSB_U2_PORT_HOST_SEL));
@@ -104,6 +123,10 @@ static void mtu3_device_disable(struct mtu3 *mtu)
{
void __iomem *ibase = mtu->ippc_base;
+ if (mtu->is_u3_ip)
+ mtu3_setbits(ibase, SSUSB_U3_CTRL(0),
+ (SSUSB_U3_PORT_DIS | SSUSB_U3_PORT_PDN));
+
mtu3_setbits(ibase, SSUSB_U2_CTRL(0),
SSUSB_U2_PORT_DIS | SSUSB_U2_PORT_PDN);
mtu3_clrbits(ibase, SSUSB_U2_CTRL(0), SSUSB_U2_PORT_OTG_SEL);
@@ -142,6 +165,9 @@ static void mtu3_intr_status_clear(struct mtu3 *mtu)
/* Clear U2 USB common interrupts status */
mtu3_writel(mbase, U3D_COMMON_USB_INTR, ~0x0);
+ /* Clear U3 LTSSM interrupts status */
+ mtu3_writel(mbase, U3D_LTSSM_INTR, ~0x0);
+
/* Clear speed change interrupt status */
mtu3_writel(mbase, U3D_DEV_LINK_INTR, ~0x0);
}
@@ -153,13 +179,20 @@ static void mtu3_intr_enable(struct mtu3 *mtu)
u32 value;
/*Enable level 1 interrupts (BMU, QMU, MAC3, DMA, MAC2, EPCTL) */
- value = BMU_INTR | QMU_INTR | MAC2_INTR | EP_CTRL_INTR;
+ value = BMU_INTR | QMU_INTR | MAC3_INTR | MAC2_INTR | EP_CTRL_INTR;
mtu3_writel(mbase, U3D_LV1IESR, value);
/* Enable U2 common USB interrupts */
value = SUSPEND_INTR | RESUME_INTR | RESET_INTR;
mtu3_writel(mbase, U3D_COMMON_USB_INTR_ENABLE, value);
+ if (mtu->is_u3_ip) {
+ /* Enable U3 LTSSM interrupts */
+ value = HOT_RST_INTR | WARM_RST_INTR | VBUS_RISE_INTR |
+ VBUS_FALL_INTR | ENTER_U3_INTR | EXIT_U3_INTR;
+ mtu3_writel(mbase, U3D_LTSSM_INTR_ENABLE, value);
+ }
+
/* Enable QMU interrupts. */
value = TXQ_CSERR_INT | TXQ_LENERR_INT | RXQ_CSERR_INT |
RXQ_LENERR_INT | RXQ_ZLPERR_INT;
@@ -205,6 +238,17 @@ void mtu3_ep_stall_set(struct mtu3_ep *mep, bool set)
set ? "SEND STALL" : "CLEAR STALL, with EP RESET");
}
+void mtu3_dev_on_off(struct mtu3 *mtu, int is_on)
+{
+ if (mtu->is_u3_ip && (mtu->max_speed == USB_SPEED_SUPER))
+ mtu3_ss_func_set(mtu, is_on);
+ else
+ mtu3_hs_softconn_set(mtu, is_on);
+
+ dev_info(mtu->dev, "gadget (%s) pullup D%s\n",
+ usb_speed_string(mtu->max_speed), is_on ? "+" : "-");
+}
+
void mtu3_start(struct mtu3 *mtu)
{
void __iomem *mbase = mtu->mac_base;
@@ -214,13 +258,21 @@ void mtu3_start(struct mtu3 *mtu)
mtu3_clrbits(mtu->ippc_base, U3D_SSUSB_IP_PW_CTRL2, SSUSB_IP_DEV_PDN);
+ /*
+ * When disable U2 port, USB2_CSR's register will be reset to
+ * default value after re-enable it again(HS is enabled by default).
+ * So if force mac to work as FS, disable HS function.
+ */
+ if (mtu->max_speed == USB_SPEED_FULL)
+ mtu3_clrbits(mbase, U3D_POWER_MANAGEMENT, HS_ENABLE);
+
/* Initialize the default interrupts */
mtu3_intr_enable(mtu);
mtu->is_active = 1;
if (mtu->softconnect)
- mtu3_hs_softconn_set(mtu, 1);
+ mtu3_dev_on_off(mtu, 1);
}
void mtu3_stop(struct mtu3 *mtu)
@@ -231,7 +283,7 @@ void mtu3_stop(struct mtu3 *mtu)
mtu3_intr_status_clear(mtu);
if (mtu->softconnect)
- mtu3_hs_softconn_set(mtu, 0);
+ mtu3_dev_on_off(mtu, 0);
mtu->is_active = 0;
mtu3_setbits(mtu->ippc_base, U3D_SSUSB_IP_PW_CTRL2, SSUSB_IP_DEV_PDN);
@@ -362,7 +414,10 @@ void mtu3_deconfig_ep(struct mtu3 *mtu, struct mtu3_ep *mep)
}
/*
- * 1. when supports only HS, the fifo is shared for all EPs, and
+ * Two scenarios:
+ * 1. when device IP supports SS, the fifo of EP0, TX EPs, RX EPs
+ * are separated;
+ * 2. when supports only HS, the fifo is shared for all EPs, and
* the capability registers of @EPNTXFFSZ or @EPNRXFFSZ indicate
* the total fifo size of non-ep0, and ep0's is fixed to 64B,
* so the total fifo size is 64B + @EPNTXFFSZ;
@@ -376,18 +431,33 @@ static void get_ep_fifo_config(struct mtu3 *mtu)
struct mtu3_fifo_info *rx_fifo;
u32 fifosize;
- fifosize = mtu3_readl(mtu->mac_base, U3D_CAP_EPNTXFFSZ);
- tx_fifo = &mtu->tx_fifo;
- tx_fifo->base = MTU3_U2_IP_EP0_FIFO_SIZE;
- tx_fifo->limit = (fifosize / MTU3_EP_FIFO_UNIT) >> 1;
- bitmap_zero(tx_fifo->bitmap, MTU3_FIFO_BIT_SIZE);
-
- rx_fifo = &mtu->rx_fifo;
- rx_fifo->base =
- tx_fifo->base + tx_fifo->limit * MTU3_EP_FIFO_UNIT;
- rx_fifo->limit = tx_fifo->limit;
- bitmap_zero(rx_fifo->bitmap, MTU3_FIFO_BIT_SIZE);
- mtu->slot = MTU3_U2_IP_SLOT_DEFAULT;
+ if (mtu->is_u3_ip) {
+ fifosize = mtu3_readl(mtu->mac_base, U3D_CAP_EPNTXFFSZ);
+ tx_fifo = &mtu->tx_fifo;
+ tx_fifo->base = 0;
+ tx_fifo->limit = fifosize / MTU3_EP_FIFO_UNIT;
+ bitmap_zero(tx_fifo->bitmap, MTU3_FIFO_BIT_SIZE);
+
+ fifosize = mtu3_readl(mtu->mac_base, U3D_CAP_EPNRXFFSZ);
+ rx_fifo = &mtu->rx_fifo;
+ rx_fifo->base = 0;
+ rx_fifo->limit = fifosize / MTU3_EP_FIFO_UNIT;
+ bitmap_zero(rx_fifo->bitmap, MTU3_FIFO_BIT_SIZE);
+ mtu->slot = MTU3_U3_IP_SLOT_DEFAULT;
+ } else {
+ fifosize = mtu3_readl(mtu->mac_base, U3D_CAP_EPNTXFFSZ);
+ tx_fifo = &mtu->tx_fifo;
+ tx_fifo->base = MTU3_U2_IP_EP0_FIFO_SIZE;
+ tx_fifo->limit = (fifosize / MTU3_EP_FIFO_UNIT) >> 1;
+ bitmap_zero(tx_fifo->bitmap, MTU3_FIFO_BIT_SIZE);
+
+ rx_fifo = &mtu->rx_fifo;
+ rx_fifo->base =
+ tx_fifo->base + tx_fifo->limit * MTU3_EP_FIFO_UNIT;
+ rx_fifo->limit = tx_fifo->limit;
+ bitmap_zero(rx_fifo->bitmap, MTU3_FIFO_BIT_SIZE);
+ mtu->slot = MTU3_U2_IP_SLOT_DEFAULT;
+ }
dev_dbg(mtu->dev, "%s, TX: base-%d, limit-%d; RX: base-%d, limit-%d\n",
__func__, tx_fifo->base, tx_fifo->limit,
@@ -416,17 +486,21 @@ static int mtu3_mem_alloc(struct mtu3 *mtu)
void __iomem *mbase = mtu->mac_base;
struct mtu3_ep *ep_array;
int in_ep_num, out_ep_num;
- u32 cap_epinfo;
+ u32 cap_epinfo, cap_dev;
int ret;
int i;
mtu->hw_version = mtu3_readl(mtu->ippc_base, U3D_SSUSB_HW_ID);
+ cap_dev = mtu3_readl(mtu->ippc_base, U3D_SSUSB_IP_DEV_CAP);
+ mtu->is_u3_ip = !!SSUSB_IP_DEV_U3_PORT_NUM(cap_dev);
+
cap_epinfo = mtu3_readl(mbase, U3D_CAP_EPINFO);
in_ep_num = CAP_TX_EP_NUM(cap_epinfo);
out_ep_num = CAP_RX_EP_NUM(cap_epinfo);
- dev_info(mtu->dev, "IP version 0x%x\n", mtu->hw_version);
+ dev_info(mtu->dev, "IP version 0x%x(%s IP)\n", mtu->hw_version,
+ mtu->is_u3_ip ? "U3" : "U2");
dev_info(mtu->dev, "fifosz/epnum: Tx=%#x/%d, Rx=%#x/%d\n",
mtu3_readl(mbase, U3D_CAP_EPNTXFFSZ), in_ep_num,
mtu3_readl(mbase, U3D_CAP_EPNRXFFSZ), out_ep_num);
@@ -469,6 +543,27 @@ static void mtu3_mem_free(struct mtu3 *mtu)
kfree(mtu->ep_array);
}
+static void mtu3_set_speed(struct mtu3 *mtu)
+{
+ void __iomem *mbase = mtu->mac_base;
+
+ if (!mtu->is_u3_ip && (mtu->max_speed > USB_SPEED_HIGH))
+ mtu->max_speed = USB_SPEED_HIGH;
+
+ if (mtu->max_speed == USB_SPEED_FULL) {
+ /* disable U3 SS function */
+ mtu3_clrbits(mbase, U3D_USB3_CONFIG, USB3_EN);
+ /* disable HS function */
+ mtu3_clrbits(mbase, U3D_POWER_MANAGEMENT, HS_ENABLE);
+ } else if (mtu->max_speed == USB_SPEED_HIGH) {
+ mtu3_clrbits(mbase, U3D_USB3_CONFIG, USB3_EN);
+ /* HS/FS detected by HW */
+ mtu3_setbits(mbase, U3D_POWER_MANAGEMENT, HS_ENABLE);
+ }
+ dev_info(mtu->dev, "max_speed: %s\n",
+ usb_speed_string(mtu->max_speed));
+}
+
static void mtu3_regs_init(struct mtu3 *mtu)
{
@@ -478,9 +573,16 @@ static void mtu3_regs_init(struct mtu3 *mtu)
mtu3_intr_disable(mtu);
mtu3_intr_status_clear(mtu);
- mtu3_clrbits(mbase, U3D_USB3_CONFIG, USB3_EN);
- /* HS/FS detected by HW */
- mtu3_setbits(mbase, U3D_POWER_MANAGEMENT, HS_ENABLE);
+ if (mtu->is_u3_ip) {
+ /* disable LGO_U1/U2 by default */
+ mtu3_clrbits(mbase, U3D_LINK_POWER_CONTROL,
+ SW_U1_ACCEPT_ENABLE | SW_U2_ACCEPT_ENABLE |
+ SW_U1_REQUEST_ENABLE | SW_U2_REQUEST_ENABLE);
+ /* device responses to u3_exit from host automatically */
+ mtu3_clrbits(mbase, U3D_LTSSM_CTRL, SOFT_U3_EXIT_EN);
+ }
+
+ mtu3_set_speed(mtu);
/* delay about 0.1us from detecting reset to send chirp-K */
mtu3_clrbits(mbase, U3D_LINK_RESET_INFO, WTCHRP_MSK);
@@ -530,6 +632,10 @@ static irqreturn_t mtu3_link_isr(struct mtu3 *mtu)
mtu3_setbits(mbase, U3D_POWER_MANAGEMENT,
LPM_BESL_STALL | LPM_BESLD_STALL);
break;
+ case MTU3_SPEED_SUPER:
+ udev_speed = USB_SPEED_SUPER;
+ maxpkt = 512;
+ break;
default:
udev_speed = USB_SPEED_UNKNOWN;
break;
@@ -548,6 +654,34 @@ static irqreturn_t mtu3_link_isr(struct mtu3 *mtu)
return IRQ_HANDLED;
}
+static irqreturn_t mtu3_u3_ltssm_isr(struct mtu3 *mtu)
+{
+ void __iomem *mbase = mtu->mac_base;
+ u32 ltssm;
+
+ ltssm = mtu3_readl(mbase, U3D_LTSSM_INTR);
+ ltssm &= mtu3_readl(mbase, U3D_LTSSM_INTR_ENABLE);
+ mtu3_writel(mbase, U3D_LTSSM_INTR, ltssm); /* W1C */
+ dev_dbg(mtu->dev, "=== LTSSM[%x] ===\n", ltssm);
+
+ if (ltssm & (HOT_RST_INTR | WARM_RST_INTR))
+ mtu3_gadget_reset(mtu);
+
+ if (ltssm & VBUS_FALL_INTR)
+ mtu3_ss_func_set(mtu, false);
+
+ if (ltssm & VBUS_RISE_INTR)
+ mtu3_ss_func_set(mtu, true);
+
+ if (ltssm & EXIT_U3_INTR)
+ mtu3_gadget_resume(mtu);
+
+ if (ltssm & ENTER_U3_INTR)
+ mtu3_gadget_suspend(mtu);
+
+ return IRQ_HANDLED;
+}
+
static irqreturn_t mtu3_u2_common_isr(struct mtu3 *mtu)
{
void __iomem *mbase = mtu->mac_base;
@@ -588,6 +722,9 @@ irqreturn_t mtu3_irq(int irq, void *data)
if (level1 & MAC2_INTR)
mtu3_u2_common_isr(mtu);
+ if (level1 & MAC3_INTR)
+ mtu3_u3_ltssm_isr(mtu);
+
if (level1 & BMU_INTR)
mtu3_ep0_isr(mtu);
@@ -633,6 +770,27 @@ int ssusb_gadget_init(struct mtu3 *mtu)
struct device *dev = mtu->dev;
int ret;
+ mtu->max_speed = usb_get_maximum_speed(dev);
+
+ /* check the max_speed parameter */
+ switch (mtu->max_speed) {
+ case USB_SPEED_FULL:
+ case USB_SPEED_HIGH:
+ case USB_SPEED_SUPER:
+ break;
+ default:
+ dev_err(dev, "invalid max_speed: %s\n",
+ usb_speed_string(mtu->max_speed));
+ /* fall through */
+ case USB_SPEED_UNKNOWN:
+ /* default as SS */
+ mtu->max_speed = USB_SPEED_SUPER;
+ break;
+ }
+
+ dev_dbg(dev, "mac_base=0x%p, ippc_base=0x%p\n",
+ mtu->mac_base, mtu->ippc_base);
+
ret = mtu3_hw_init(mtu);
if (ret) {
dev_err(dev, "mtu3 hw init failed:%d\n", ret);
diff --git a/drivers/usb/mtu3/mtu3_gadget.c b/drivers/usb/mtu3/mtu3_gadget.c
index 0e25e0f..84f3fe1 100644
--- a/drivers/usb/mtu3/mtu3_gadget.c
+++ b/drivers/usb/mtu3/mtu3_gadget.c
@@ -73,6 +73,7 @@ static void nuke(struct mtu3_ep *mep, const int status)
static int mtu3_ep_enable(struct mtu3_ep *mep)
{
const struct usb_endpoint_descriptor *desc;
+ const struct usb_ss_ep_comp_descriptor *comp_desc;
struct mtu3 *mtu = mep->mtu;
u32 interval = 0;
u32 mult = 0;
@@ -81,11 +82,24 @@ static int mtu3_ep_enable(struct mtu3_ep *mep)
int ret;
desc = mep->desc;
+ comp_desc = mep->comp_desc;
mep->type = usb_endpoint_type(desc);
max_packet = usb_endpoint_maxp(desc);
mep->maxp = max_packet & GENMASK(10, 0);
switch (mtu->g.speed) {
+ case USB_SPEED_SUPER:
+ if (usb_endpoint_xfer_int(desc) ||
+ usb_endpoint_xfer_isoc(desc)) {
+ interval = desc->bInterval;
+ interval = clamp_val(interval, 1, 16) - 1;
+ if (usb_endpoint_xfer_isoc(desc) && comp_desc)
+ mult = comp_desc->bmAttributes;
+ }
+ if (comp_desc)
+ burst = comp_desc->bMaxBurst;
+
+ break;
case USB_SPEED_HIGH:
if (usb_endpoint_xfer_isoc(desc) ||
usb_endpoint_xfer_int(desc)) {
@@ -103,6 +117,7 @@ static int mtu3_ep_enable(struct mtu3_ep *mep)
mep->ep.maxpacket = mep->maxp;
mep->ep.desc = desc;
+ mep->ep.comp_desc = comp_desc;
/* slot mainly affects bulk/isoc transfer, so ignore int */
mep->slot = usb_endpoint_xfer_int(desc) ? 0 : mtu->slot;
@@ -135,6 +150,7 @@ static int mtu3_ep_disable(struct mtu3_ep *mep)
mep->desc = NULL;
mep->ep.desc = NULL;
+ mep->comp_desc = NULL;
mep->type = 0;
mep->flags = 0;
@@ -178,6 +194,7 @@ static int mtu3_gadget_ep_enable(struct usb_ep *ep,
spin_lock_irqsave(&mtu->lock, flags);
mep->desc = desc;
+ mep->comp_desc = ep->comp_desc;
ret = mtu3_ep_enable(mep);
if (ret)
@@ -439,13 +456,15 @@ static int mtu3_gadget_wakeup(struct usb_gadget *gadget)
return -EOPNOTSUPP;
spin_lock_irqsave(&mtu->lock, flags);
-
- mtu3_setbits(mtu->mac_base, U3D_POWER_MANAGEMENT, RESUME);
- spin_unlock_irqrestore(&mtu->lock, flags);
- usleep_range(10000, 11000);
- spin_lock_irqsave(&mtu->lock, flags);
- mtu3_clrbits(mtu->mac_base, U3D_POWER_MANAGEMENT, RESUME);
-
+ if (mtu->g.speed == USB_SPEED_SUPER) {
+ mtu3_setbits(mtu->mac_base, U3D_LINK_POWER_CONTROL, UX_EXIT);
+ } else {
+ mtu3_setbits(mtu->mac_base, U3D_POWER_MANAGEMENT, RESUME);
+ spin_unlock_irqrestore(&mtu->lock, flags);
+ usleep_range(10000, 11000);
+ spin_lock_irqsave(&mtu->lock, flags);
+ mtu3_clrbits(mtu->mac_base, U3D_POWER_MANAGEMENT, RESUME);
+ }
spin_unlock_irqrestore(&mtu->lock, flags);
return 0;
}
@@ -476,7 +495,7 @@ static int mtu3_gadget_pullup(struct usb_gadget *gadget, int is_on)
mtu->softconnect = is_on;
} else if (is_on != mtu->softconnect) {
mtu->softconnect = is_on;
- mtu3_hs_softconn_set(mtu, is_on);
+ mtu3_dev_on_off(mtu, is_on);
}
spin_unlock_irqrestore(&mtu->lock, flags);
@@ -524,7 +543,7 @@ static void stop_activity(struct mtu3 *mtu)
/* deactivate the hardware */
if (mtu->softconnect) {
mtu->softconnect = 0;
- mtu3_hs_softconn_set(mtu, 0);
+ mtu3_dev_on_off(mtu, 0);
}
/*
@@ -587,14 +606,14 @@ static void init_hw_ep(struct mtu3 *mtu, struct mtu3_ep *mep,
mep->ep.name = mep->name;
INIT_LIST_HEAD(&mep->ep.ep_list);
- /* initialize maxpacket as HS */
+ /* initialize maxpacket as SS */
if (!epnum) {
- usb_ep_set_maxpacket_limit(&mep->ep, 64);
+ usb_ep_set_maxpacket_limit(&mep->ep, 512);
mep->ep.caps.type_control = true;
mep->ep.ops = &mtu3_ep0_ops;
mtu->g.ep0 = &mep->ep;
} else {
- usb_ep_set_maxpacket_limit(&mep->ep, 512);
+ usb_ep_set_maxpacket_limit(&mep->ep, 1024);
mep->ep.caps.type_iso = true;
mep->ep.caps.type_bulk = true;
mep->ep.caps.type_int = true;
@@ -637,7 +656,7 @@ int mtu3_gadget_setup(struct mtu3 *mtu)
int ret;
mtu->g.ops = &mtu3_gadget_ops;
- mtu->g.max_speed = USB_SPEED_HIGH;
+ mtu->g.max_speed = mtu->max_speed;
mtu->g.speed = USB_SPEED_UNKNOWN;
mtu->g.sg_supported = 0;
mtu->g.name = MTU3_DRIVER_NAME;
diff --git a/drivers/usb/mtu3/mtu3_gadget_ep0.c b/drivers/usb/mtu3/mtu3_gadget_ep0.c
index 4e2c2bab..2d7427b 100644
--- a/drivers/usb/mtu3/mtu3_gadget_ep0.c
+++ b/drivers/usb/mtu3/mtu3_gadget_ep0.c
@@ -161,6 +161,41 @@ static void ep0_stall_set(struct mtu3_ep *mep0, bool set, u32 pktrdy)
static void ep0_dummy_complete(struct usb_ep *ep, struct usb_request *req)
{}
+static void ep0_set_sel_complete(struct usb_ep *ep, struct usb_request *req)
+{
+ struct mtu3_request *mreq;
+ struct mtu3 *mtu;
+ struct usb_set_sel_req sel;
+
+ memcpy(&sel, req->buf, sizeof(sel));
+
+ mreq = to_mtu3_request(req);
+ mtu = mreq->mtu;
+ dev_dbg(mtu->dev, "u1sel:%d, u1pel:%d, u2sel:%d, u2pel:%d\n",
+ sel.u1_sel, sel.u1_pel, sel.u2_sel, sel.u2_pel);
+}
+
+/* queue data stage to handle 6 byte SET_SEL request */
+static int ep0_set_sel(struct mtu3 *mtu, struct usb_ctrlrequest *setup)
+{
+ int ret;
+ u16 length = le16_to_cpu(setup->wLength);
+
+ if (unlikely(length != 6)) {
+ dev_err(mtu->dev, "%s wrong wLength:%d\n",
+ __func__, length);
+ return -EINVAL;
+ }
+
+ mtu->ep0_req.mep = mtu->ep0;
+ mtu->ep0_req.request.length = 6;
+ mtu->ep0_req.request.buf = mtu->setup_buf;
+ mtu->ep0_req.request.complete = ep0_set_sel_complete;
+ ret = ep0_queue(mtu->ep0, &mtu->ep0_req);
+
+ return ret < 0 ? ret : 1;
+}
+
static int
ep0_get_status(struct mtu3 *mtu, const struct usb_ctrlrequest *setup)
{
@@ -174,6 +209,15 @@ static void ep0_dummy_complete(struct usb_ep *ep, struct usb_request *req)
case USB_RECIP_DEVICE:
result[0] = mtu->is_self_powered << USB_DEVICE_SELF_POWERED;
result[0] |= mtu->may_wakeup << USB_DEVICE_REMOTE_WAKEUP;
+ /* superspeed only */
+ if (mtu->g.speed == USB_SPEED_SUPER) {
+ result[0] |= mtu->u1_enable << USB_DEV_STAT_U1_ENABLED;
+ result[0] |= mtu->u2_enable << USB_DEV_STAT_U2_ENABLED;
+ }
+
+ dev_dbg(mtu->dev, "%s result=%x, U1=%x, U2=%x\n", __func__,
+ result[0], mtu->u1_enable, mtu->u2_enable);
+
break;
case USB_RECIP_INTERFACE:
break;
@@ -265,7 +309,9 @@ static int handle_test_mode(struct mtu3 *mtu, struct usb_ctrlrequest *setup)
static int ep0_handle_feature_dev(struct mtu3 *mtu,
struct usb_ctrlrequest *setup, bool set)
{
+ void __iomem *mbase = mtu->mac_base;
int handled = -EINVAL;
+ u32 lpc;
switch (le16_to_cpu(setup->wValue)) {
case USB_DEVICE_REMOTE_WAKEUP:
@@ -279,6 +325,36 @@ static int ep0_handle_feature_dev(struct mtu3 *mtu,
handled = handle_test_mode(mtu, setup);
break;
+ case USB_DEVICE_U1_ENABLE:
+ if (mtu->g.speed != USB_SPEED_SUPER ||
+ mtu->g.state != USB_STATE_CONFIGURED)
+ break;
+
+ lpc = mtu3_readl(mbase, U3D_LINK_POWER_CONTROL);
+ if (set)
+ lpc |= SW_U1_ACCEPT_ENABLE;
+ else
+ lpc &= ~SW_U1_ACCEPT_ENABLE;
+ mtu3_writel(mbase, U3D_LINK_POWER_CONTROL, lpc);
+
+ mtu->u1_enable = !!set;
+ handled = 1;
+ break;
+ case USB_DEVICE_U2_ENABLE:
+ if (mtu->g.speed != USB_SPEED_SUPER ||
+ mtu->g.state != USB_STATE_CONFIGURED)
+ break;
+
+ lpc = mtu3_readl(mbase, U3D_LINK_POWER_CONTROL);
+ if (set)
+ lpc |= SW_U2_ACCEPT_ENABLE;
+ else
+ lpc &= ~SW_U2_ACCEPT_ENABLE;
+ mtu3_writel(mbase, U3D_LINK_POWER_CONTROL, lpc);
+
+ mtu->u2_enable = !!set;
+ handled = 1;
+ break;
default:
handled = -EINVAL;
break;
@@ -303,6 +379,17 @@ static int ep0_handle_feature(struct mtu3 *mtu,
case USB_RECIP_DEVICE:
handled = ep0_handle_feature_dev(mtu, setup, set);
break;
+ case USB_RECIP_INTERFACE:
+ /* superspeed only */
+ if ((value == USB_INTRF_FUNC_SUSPEND)
+ && (mtu->g.speed == USB_SPEED_SUPER)) {
+ /*
+ * forward the request because function drivers
+ * should handle it
+ */
+ handled = 0;
+ }
+ break;
case USB_RECIP_ENDPOINT:
epnum = index & USB_ENDPOINT_NUMBER_MASK;
if (epnum == 0 || epnum >= mtu->num_eps ||
@@ -390,6 +477,9 @@ static int handle_standard_request(struct mtu3 *mtu,
case USB_REQ_GET_STATUS:
handled = ep0_get_status(mtu, setup);
break;
+ case USB_REQ_SET_SEL:
+ handled = ep0_set_sel(mtu, setup);
+ break;
case USB_REQ_SET_ISOCH_DELAY:
handled = 1;
break;
diff --git a/drivers/usb/mtu3/mtu3_hw_regs.h b/drivers/usb/mtu3/mtu3_hw_regs.h
index 08c83c5..2123672 100644
--- a/drivers/usb/mtu3/mtu3_hw_regs.h
+++ b/drivers/usb/mtu3/mtu3_hw_regs.h
@@ -260,13 +260,46 @@
/*---------------- SSUSB_USB3_MAC_CSR REGISTER DEFINITION ----------------*/
+#define U3D_LTSSM_CTRL (SSUSB_USB3_MAC_CSR_BASE + 0x0010)
#define U3D_USB3_CONFIG (SSUSB_USB3_MAC_CSR_BASE + 0x001C)
+#define U3D_LTSSM_INTR_ENABLE (SSUSB_USB3_MAC_CSR_BASE + 0x013C)
+#define U3D_LTSSM_INTR (SSUSB_USB3_MAC_CSR_BASE + 0x0140)
+
/*---------------- SSUSB_USB3_MAC_CSR FIELD DEFINITION ----------------*/
+/* U3D_LTSSM_CTRL */
+#define FORCE_POLLING_FAIL BIT(4)
+#define FORCE_RXDETECT_FAIL BIT(3)
+#define SOFT_U3_EXIT_EN BIT(2)
+#define COMPLIANCE_EN BIT(1)
+#define U1_GO_U2_EN BIT(0)
+
/* U3D_USB3_CONFIG */
#define USB3_EN BIT(0)
+/* U3D_LTSSM_INTR_ENABLE */
+/* U3D_LTSSM_INTR */
+#define U3_RESUME_INTR BIT(18)
+#define U3_LFPS_TMOUT_INTR BIT(17)
+#define VBUS_FALL_INTR BIT(16)
+#define VBUS_RISE_INTR BIT(15)
+#define RXDET_SUCCESS_INTR BIT(14)
+#define EXIT_U3_INTR BIT(13)
+#define EXIT_U2_INTR BIT(12)
+#define EXIT_U1_INTR BIT(11)
+#define ENTER_U3_INTR BIT(10)
+#define ENTER_U2_INTR BIT(9)
+#define ENTER_U1_INTR BIT(8)
+#define ENTER_U0_INTR BIT(7)
+#define RECOVERY_INTR BIT(6)
+#define WARM_RST_INTR BIT(5)
+#define HOT_RST_INTR BIT(4)
+#define LOOPBACK_INTR BIT(3)
+#define COMPLIANCE_INTR BIT(2)
+#define SS_DISABLE_INTR BIT(1)
+#define SS_INACTIVE_INTR BIT(0)
+
/*---------------- SSUSB_USB3_SYS_CSR REGISTER DEFINITION ----------------*/
#define U3D_LINK_UX_INACT_TIMER (SSUSB_USB3_SYS_CSR_BASE + 0x020C)
--
1.7.9.5
Powered by blists - more mailing lists