[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1476926126-6079-2-git-send-email-yamada.masahiro@socionext.com>
Date: Thu, 20 Oct 2016 10:15:26 +0900
From: Masahiro Yamada <yamada.masahiro@...ionext.com>
To: linux-arm-kernel@...ts.infradead.org
Cc: Viresh Kumar <viresh.kumar@...aro.org>,
Masahiro Yamada <yamada.masahiro@...ionext.com>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Rob Herring <robh+dt@...nel.org>,
Will Deacon <will.deacon@....com>,
Mark Rutland <mark.rutland@....com>,
Catalin Marinas <catalin.marinas@....com>
Subject: [PATCH v2 2/2] arm64: dts: uniphier: add CPU clocks and OPP tables for LD20 SoC
Add a CPU clock to every CPU node and CPU OPP tables to use the
generic cpufreq driver. All the CPUs in each cluster share the
same OPP table.
Note:
clock-latency-ns (300ns) was calculated based on the CPU-gear switch
sequencer spec; it takes 12 clock cycles on the sequencer running
at 50 MHz, plus a bit additional latency.
Signed-off-by: Masahiro Yamada <yamada.masahiro@...ionext.com>
---
Changes in v2:
- Match the node name to the opp-hz property.
arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi | 84 ++++++++++++++++++++++++
1 file changed, 84 insertions(+)
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
index 6f48e82..7404678 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
@@ -79,28 +79,36 @@
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0 0x000>;
+ clocks = <&sys_clk 32>;
enable-method = "psci";
+ operating-points-v2 = <&cluster0_opp>;
};
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0 0x001>;
+ clocks = <&sys_clk 32>;
enable-method = "psci";
+ operating-points-v2 = <&cluster0_opp>;
};
cpu2: cpu@100 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0 0x100>;
+ clocks = <&sys_clk 33>;
enable-method = "psci";
+ operating-points-v2 = <&cluster1_opp>;
};
cpu3: cpu@101 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0 0x101>;
+ clocks = <&sys_clk 33>;
enable-method = "psci";
+ operating-points-v2 = <&cluster1_opp>;
};
};
@@ -109,6 +117,82 @@
method = "smc";
};
+ cluster0_opp: opp_table0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp@...000000 {
+ opp-hz = /bits/ 64 <250000000>;
+ clock-latency-ns = <300>;
+ };
+ opp@...000000 {
+ opp-hz = /bits/ 64 <275000000>;
+ clock-latency-ns = <300>;
+ };
+ opp@...000000 {
+ opp-hz = /bits/ 64 <500000000>;
+ clock-latency-ns = <300>;
+ };
+ opp@...000000 {
+ opp-hz = /bits/ 64 <550000000>;
+ clock-latency-ns = <300>;
+ };
+ opp@...667000 {
+ opp-hz = /bits/ 64 <666667000>;
+ clock-latency-ns = <300>;
+ };
+ opp@...334000 {
+ opp-hz = /bits/ 64 <733334000>;
+ clock-latency-ns = <300>;
+ };
+ opp@...0000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ clock-latency-ns = <300>;
+ };
+ opp@...0000000 {
+ opp-hz = /bits/ 64 <1100000000>;
+ clock-latency-ns = <300>;
+ };
+ };
+
+ cluster1_opp: opp_table1 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp@...000000 {
+ opp-hz = /bits/ 64 <250000000>;
+ clock-latency-ns = <300>;
+ };
+ opp@...000000 {
+ opp-hz = /bits/ 64 <275000000>;
+ clock-latency-ns = <300>;
+ };
+ opp@...000000 {
+ opp-hz = /bits/ 64 <500000000>;
+ clock-latency-ns = <300>;
+ };
+ opp@...000000 {
+ opp-hz = /bits/ 64 <550000000>;
+ clock-latency-ns = <300>;
+ };
+ opp@...666666 {
+ opp-hz = /bits/ 64 <666667000>;
+ clock-latency-ns = <300>;
+ };
+ opp@...333333 {
+ opp-hz = /bits/ 64 <733334000>;
+ clock-latency-ns = <300>;
+ };
+ opp@...0000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ clock-latency-ns = <300>;
+ };
+ opp@...0000000 {
+ opp-hz = /bits/ 64 <1100000000>;
+ clock-latency-ns = <300>;
+ };
+ };
+
clocks {
refclk: ref {
compatible = "fixed-clock";
--
1.9.1
Powered by blists - more mailing lists