linux-kernel - Re: [PATCH v4] mmc: sdhci-msm: Add pm

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <d7801576-e2b3-13a3-df8d-e203a628a445@codeaurora.org>
Date:   Thu, 20 Oct 2016 20:20:16 +0530
From:   Ritesh Harjani <riteshh@...eaurora.org>
To:     Pramod Gurav <pramod.gurav@...aro.org>, ulf.hansson@...aro.org,
        adrian.hunter@...el.com, linux-mmc@...r.kernel.org
Cc:     linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org,
        linux-pm@...r.kernel.org
Subject: Re: [PATCH v4] mmc: sdhci-msm: Add pm_runtime and system PM support

Hi Pramod,

Thanks for this patch. Few minor comments.

I have tested your patch on db410c and 8996 based internal platform and 
it works fine.


On 10/18/2016 3:46 PM, Pramod Gurav wrote:
> Provides runtime PM callbacks to enable and disable clock resources
> when idle. Also support system PM callbacks to be called during system
> suspend and resume.
>
> Signed-off-by: Pramod Gurav <pramod.gurav@...aro.org>
> ---
>
> Tested on DB410C.
>
> Changes in v4:
> - Remove calls to sdhci_runtime_resume_host/sdhci_runtime_suspend_host
>   from runtime callbacks as sdhc msm controller is capable of restoring
>   it's register values after clocks are disabled and re-enabled.
>
> Changes in v3:
> - Added CONFIG_PM around runtime pm function.
> - Replaced msm suspend/resume with generic function directly
> - Use SET_SYSTEM_SLEEP_PM_OPS instead of late version
>
> Changes in v2:
> - Moved pm_rutime enabling before adding host
> - Handled pm_rutime in remove
> - Changed runtime handling with reference from sdhci-of-at91.c
>
>  drivers/mmc/host/sdhci-msm.c | 66 +++++++++++++++++++++++++++++++++++++++++++-
>  1 file changed, 65 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
> index 8ef44a2a..33ec809 100644
> --- a/drivers/mmc/host/sdhci-msm.c
> +++ b/drivers/mmc/host/sdhci-msm.c
> @@ -18,6 +18,7 @@
>  #include <linux/of_device.h>
>  #include <linux/delay.h>
>  #include <linux/mmc/mmc.h>
> +#include <linux/pm_runtime.h>
>  #include <linux/slab.h>
>
>  #include "sdhci-pltfm.h"
> @@ -658,12 +659,26 @@ static int sdhci_msm_probe(struct platform_device *pdev)
>  		goto clk_disable;
>  	}
>
> +	pm_runtime_get_noresume(&pdev->dev);
> +	pm_runtime_set_active(&pdev->dev);
> +	pm_runtime_enable(&pdev->dev);
> +	pm_runtime_set_autosuspend_delay(&pdev->dev, 50);
Use a macro MSM_MMC_AUTOSUSPEND_DELAY_MS instead of using 50 directly here.

> +	pm_runtime_use_autosuspend(&pdev->dev);
> +
>  	ret = sdhci_add_host(host);
>  	if (ret)
> -		goto clk_disable;
> +		goto pm_runtime_disable;
> +
> +	platform_set_drvdata(pdev, host);
No need to set platform_set_drvdata here. sdhci_pltfm_init will do it 
anyways.

> +
pm_runtime_mark_last_busy(&pdev->dev) can be added here.
> +	pm_runtime_put_autosuspend(&pdev->dev);
>
>  	return 0;
>
> +pm_runtime_disable:
> +	pm_runtime_disable(&pdev->dev);
> +	pm_runtime_set_suspended(&pdev->dev);
> +	pm_runtime_put_noidle(&pdev->dev);
>  clk_disable:
>  	clk_disable_unprepare(msm_host->clk);
>  pclk_disable:
> @@ -685,6 +700,11 @@ static int sdhci_msm_remove(struct platform_device *pdev)
>  		    0xffffffff);
>
>  	sdhci_remove_host(host, dead);
> +
> +	pm_runtime_get_sync(&pdev->dev);
> +	pm_runtime_disable(&pdev->dev);
> +	pm_runtime_put_noidle(&pdev->dev);
> +
>  	clk_disable_unprepare(msm_host->clk);
>  	clk_disable_unprepare(msm_host->pclk);
>  	if (!IS_ERR(msm_host->bus_clk))
> @@ -693,12 +713,56 @@ static int sdhci_msm_remove(struct platform_device *pdev)
>  	return 0;
>  }
>
> +#ifdef CONFIG_PM
> +static int sdhci_msm_runtime_suspend(struct device *dev)
> +{
> +	struct sdhci_host *host = dev_get_drvdata(dev);
> +	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> +	struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
> +
> +	clk_disable_unprepare(msm_host->clk);
> +	clk_disable_unprepare(msm_host->pclk);
> +
> +	return 0;
> +}
> +
> +static int sdhci_msm_runtime_resume(struct device *dev)
> +{
> +	struct sdhci_host *host = dev_get_drvdata(dev);
> +	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> +	struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
> +	int ret;
> +
> +	ret = clk_prepare_enable(msm_host->clk);
> +	if (ret) {
> +		dev_err(dev, "clk_enable failed: %d\n", ret);
dev_err(dev, "clk enable failed for core_clk: %d\n", ret);

> +		return ret;
> +	}
> +	ret = clk_prepare_enable(msm_host->pclk);
> +	if (ret) {
> +		dev_err(dev, "clk_enable failed: %d\n", ret);
dev_err(dev, "clk enable failed for iface_clk: %d\n", ret);

> +		clk_disable_unprepare(msm_host->clk);
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +#endif
> +
> +static const struct dev_pm_ops sdhci_msm_pm_ops = {
> +	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
> +					pm_runtime_force_resume)
> +	SET_RUNTIME_PM_OPS(sdhci_msm_runtime_suspend, sdhci_msm_runtime_resume,
> +				NULL)
> +};
> +
>  static struct platform_driver sdhci_msm_driver = {
>  	.probe = sdhci_msm_probe,
>  	.remove = sdhci_msm_remove,
>  	.driver = {
>  		   .name = "sdhci_msm",
>  		   .of_match_table = sdhci_msm_dt_match,
> +		   .pm = &sdhci_msm_pm_ops,
>  	},
>  };
>
>

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project