lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1476988627-14953-2-git-send-email-ayaka@soulik.info>
Date:   Fri, 21 Oct 2016 02:37:06 +0800
From:   Randy Li <ayaka@...lik.info>
To:     linux-usb@...r.kernel.org
Cc:     John.Youn@...opsys.com, kishon@...com,
        felipe.balbi@...ux.intel.com, mark.rutland@....com,
        devicetree@...r.kernel.org, heiko@...ech.de,
        gregkh@...uxfoundation.org, linux-kernel@...r.kernel.org,
        robh+dt@...nel.org, randy.li@...k-chips.com,
        Randy Li <ayaka@...lik.info>
Subject: [PATCH v9 1/2] usb: dwc2: assert phy reset when waking up in rk3288 platform

On the rk3288 USB host-only port (the one that's not the OTG-enabled
port) the PHY can get into a bad state when a wakeup is asserted (not
just a wakeup from full system suspend but also a wakeup from
autosuspend).

We can get the PHY out of its bad state by asserting its "port reset",
but unfortunately that seems to assert a reset onto the USB bus so it
could confuse things if we don't actually deenumerate / reenumerate the
device.

We can also get the PHY out of its bad state by fully resetting it using
the reset from the CRU (clock reset unit) in chip, which does a more full
reset.  The CRU-based reset appears to actually cause devices on the bus
to be removed and reinserted, which fixes the problem (albeit in a hacky
way).

It's unfortunate that we need to do a full re-enumeration of devices at
wakeup time, but this is better than alternative of letting the bus get
wedged.

Signed-off-by: Randy Li <ayaka@...lik.info>
---
 drivers/usb/dwc2/core.h      |  1 +
 drivers/usb/dwc2/core_intr.c | 11 +++++++++++
 drivers/usb/dwc2/platform.c  |  9 +++++++++
 3 files changed, 21 insertions(+)

diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index 2a21a04..e91ddbc 100644
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -859,6 +859,7 @@ struct dwc2_hsotg {
 	unsigned int ll_hw_enabled:1;
 
 	struct phy *phy;
+	struct work_struct phy_rst_work;
 	struct usb_phy *uphy;
 	struct dwc2_hsotg_plat *plat;
 	struct regulator_bulk_data supplies[ARRAY_SIZE(dwc2_hsotg_supply_names)];
diff --git a/drivers/usb/dwc2/core_intr.c b/drivers/usb/dwc2/core_intr.c
index d85c5c9..c3d2168 100644
--- a/drivers/usb/dwc2/core_intr.c
+++ b/drivers/usb/dwc2/core_intr.c
@@ -345,6 +345,7 @@ static void dwc2_handle_session_req_intr(struct dwc2_hsotg *hsotg)
 static void dwc2_handle_wakeup_detected_intr(struct dwc2_hsotg *hsotg)
 {
 	int ret;
+	struct device_node *np = hsotg->dev->of_node;
 
 	/* Clear interrupt */
 	dwc2_writel(GINTSTS_WKUPINT, hsotg->regs + GINTSTS);
@@ -379,6 +380,16 @@ static void dwc2_handle_wakeup_detected_intr(struct dwc2_hsotg *hsotg)
 			/* Restart the Phy Clock */
 			pcgcctl &= ~PCGCTL_STOPPCLK;
 			dwc2_writel(pcgcctl, hsotg->regs + PCGCTL);
+
+			/*
+			 * It is a quirk in Rockchip RK3288, causing by
+			 * a hardware bug. This will propagate out and
+			 * eventually we'll re-enumerate the device. 
+			 * Not great but the best we can do 
+			 */
+			if (of_device_is_compatible(np, "rockchip,rk3288-usb"))
+				schedule_work(&hsotg->phy_rst_work);
+
 			mod_timer(&hsotg->wkp_timer,
 				  jiffies + msecs_to_jiffies(71));
 		} else {
diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
index 8e1728b..65953cf 100644
--- a/drivers/usb/dwc2/platform.c
+++ b/drivers/usb/dwc2/platform.c
@@ -366,6 +366,14 @@ int dwc2_lowlevel_hw_disable(struct dwc2_hsotg *hsotg)
 	return ret;
 }
 
+/* Only used to reset usb phy at interrupter runtime */
+static void dwc2_reset_phy_work(struct work_struct *data)
+{
+	struct dwc2_hsotg *hsotg = container_of(data, struct dwc2_hsotg,
+			phy_rst_work);
+	phy_reset(hsotg->phy);
+}
+
 static int dwc2_lowlevel_hw_init(struct dwc2_hsotg *hsotg)
 {
 	int i, ret;
@@ -410,6 +418,7 @@ static int dwc2_lowlevel_hw_init(struct dwc2_hsotg *hsotg)
 			return ret;
 		}
 	}
+	INIT_WORK(&hsotg->phy_rst_work, dwc2_reset_phy_work);
 
 	if (!hsotg->phy) {
 		hsotg->uphy = devm_usb_get_phy(hsotg->dev, USB_PHY_TYPE_USB2);
-- 
2.7.4

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ