linux-kernel - Re: [-next, 1/2] Input: synaptics-rmi4 - add support for F55 sensor tuning

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Fri, 21 Oct 2016 15:03:24 -0700
From:   Guenter Roeck <linux@...ck-us.net>
To:     Christopher Heiny <cheiny@...aptics.com>
Cc:     Nick Dyer <nick@...anahar.org>,
        Dmitry Torokhov <dmitry.torokhov@...il.com>,
        Chris Healy <cphealy@...il.com>,
        Andrew Duggan <aduggan@...aptics.com>,
        Mauro Carvalho Chehab <mchehab@...nel.org>,
        Hans Verkuil <hans.verkuil@...co.com>,
        linux-kernel@...r.kernel.org, linux-input@...r.kernel.org
Subject: Re: [-next, 1/2] Input: synaptics-rmi4 - add support for F55 sensor
 tuning

On Thu, Oct 20, 2016 at 04:28:39PM -0700, Christopher Heiny wrote:
> On Thu, 2016-10-20 at 23:51 +0100, Nick Dyer wrote:
> > On Mon, Oct 17, 2016 at 02:30:08PM -0700, Guenter Roeck wrote:
> > > 
> > > On Fri, Sep 30, 2016 at 08:22:47PM -0700, Guenter Roeck wrote:
> > > > 
> > > > Sensor tuning support is needed to determine the number of
> > > > enabled
> > > > tx and rx electrodes for use in F54 functions.
> > > > 
> > > > The number of enabled electrodes is not identical to the total
> > > > number
> > > > of electrodes as reported with F55:Query0 and F55:Query1. It has
> > > > to be
> > > > calculated by analyzing F55:Ctrl1 (sensor receiver assignment)
> > > > and
> > > > F55:Ctrl2 (sensor transmitter assignment).
> > > > 
> > > > Support for additional sensor tuning functions may be added
> > > > later.
> > > > 
> > > > Signed-off-by: Guenter Roeck <linux@...ck-us.net>
> > > 
> > > Ping ... any comments on this patch and on
> > > https://patchwork.kernel.org/patch/9359061/ ?
> > > 
> > > Both patches now apply to mainline.
> > > 
> > > Thanks,
> > > Guenter
> > 
> > Hi Guenter-
> > 
> > I've reviewed and tested (on S7300 and S7813) both these patches now
> > - you can add my sign-off.
> > 
> > However, on the S7813 firmware, F55 is on PDT page 3, and nothing
> > on page 2, so the default behaviour of the mainline driver means it
> > is
> > not initialised.
> > 
> > So I think we need to revert this change in mainline:
> > https://patchwork.kernel.org/patch/3796971/
> > 
> > See below the PDT scan with it reverted and some debug added.
> > 
> > Christopher/Andrew: is there a better heuristic than scanning all 255
> > pages, given that some firmwares contain gaps?
> 
> It's difficult to say.  It is against the RMI4 spec for there to be
> gaps in the pages - you're supposed to be able to scan until you hit a
> page with an empty PDT, and then stop.
> 
> Since F55 is hardcoded to page 3 for this firmware, it may be a
> customer specific deviation.  This may have been done to accommodate a
> customer-written driver that did not scan the PDT, but instead always
> looked for F55 on page 3.  This idea is supported by the existence of
> the F51 custom function on page 4, since F51 almost always requires
> customer driver code to handle it.
> 
> In my opinion, the Non-standard bit should have been set in the PDT to
> indicate that special handling was required, but that wasn't done in
> this case.
> 
> Anyway, given that this sort of thing has escaped into the wild, I'm
> unsure what to advise.  Just off the top of my head, one possibility is
> to have a "keep-going" option to scan the first 128 pages (0x00 through
> 0x7F), regardless of whether an empty page is encountered.  This could
> be triggered either by a product ID on the "known goofy list", or by a
> boot/load time flag.  I'm sure there are other possibilities, though.
> 

Maybe introduce quirks if the problematic device and/or problematic firmware
version can be identified ? Not sure if scanning 128 pages would be necessary,
though - requiring two empty pages to stop scanning might be sufficient.

Guenter