lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20161021013546.GF30578@tiger>
Date:   Fri, 21 Oct 2016 09:35:46 +0800
From:   Shawn Guo <shawnguo@...nel.org>
To:     Jagan Teki <jagan@...nedev.com>
Cc:     devicetree@...r.kernel.org, Matteo Lisi <matteo.lisi@...icam.com>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        Jagan Teki <jteki@...nedev.com>,
        Michael Trimarchi <michael@...rulasolutions.com>,
        "linux-arm-kernel@...ts.infradead.org" 
        <linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH v7 0/5] ARM: dts: imx6q: Add Engicam i.CoreM6 dts

On Tue, Oct 18, 2016 at 05:30:28PM +0530, Jagan Teki wrote:
> Hi Shawn,
> 
> On Fri, Oct 14, 2016 at 2:57 PM, Jagan Teki <jteki@...nedev.com> wrote:
> > This is series add dts support for Engicam I.Core M6 qdl modules. just
> > rebased on top of linux-next of previous set[1].
> >
> > [1] http://www.spinics.net/lists/kernel/msg2358233.html
> >
> > Jagan Teki (5):
> >   ARM: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual initial support
> >   ARM: dts: imx6q: Add Engicam i.CoreM6 DualLite/Solo initial support
> >   ARM: dts: imx6qdl-icore: Add usbhost support
> >   ARM: dts: imx6qdl-icore: Add usbotg support
> >   ARM: dts: imx6qdl-icore: Add FEC support
> >
> >  arch/arm/boot/dts/Makefile           |   2 +
> >  arch/arm/boot/dts/imx6dl-icore.dts   |  59 ++++++++
> >  arch/arm/boot/dts/imx6q-icore.dts    |  59 ++++++++
> >  arch/arm/boot/dts/imx6qdl-icore.dtsi | 271 +++++++++++++++++++++++++++++++++++
> >  4 files changed, 391 insertions(+)
> >  create mode 100644 arch/arm/boot/dts/imx6dl-icore.dts
> >  create mode 100644 arch/arm/boot/dts/imx6q-icore.dts
> >  create mode 100644 arch/arm/boot/dts/imx6qdl-icore.dtsi
> 
> Can you pick this series?

Sorry for the delay.  The first two patches look good, and I had a
couple of small comments on the other 3.  Also, for the initial board
support submission like this, you do not need to split it per device
support.  That said, please squash the series into one patch when
resending.

Shawn

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ