| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1477047350.6423.7.camel@linux.intel.com>
Date: Fri, 21 Oct 2016 13:55:50 +0300
From: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
To: Luis.Oliveira@...opsys.com, jarkko.nikula@...ux.intel.com,
mika.westerberg@...ux.intel.com, wsa@...-dreams.de,
linux-i2c@...r.kernel.org, linux-kernel@...r.kernel.org,
robh+dt@...nel.org, mark.rutland@....com,
devicetree@...r.kernel.org
Cc: CARLOS.PALMINHA@...opsys.com, Ramiro.Oliveira@...opsys.com
Subject: Re: [PATCH v2 4/4] Cleaned the code, no functional changes.
On Fri, 2016-10-14 at 17:52 +0100, Luis.Oliveira@...opsys.com wrote:
> From: Luis Oliveira <lolivei@...opsys.com>
>
Style issues.
The parts of this patch shouldn't be brought by the others patches in
the series. Consider carefully check your patches before submitting.
> Signed-off-by: Luis Oliveira <lolivei@...opsys.com>
> ---
> drivers/i2c/busses/i2c-designware-core.c | 113 ++++++++++++++-----
> ---------
> drivers/i2c/busses/i2c-designware-platdrv.c | 24 +++---
> 2 files changed, 68 insertions(+), 69 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-designware-core.c
> b/drivers/i2c/busses/i2c-designware-core.c
> index 71a377e..4196491 100644
> --- a/drivers/i2c/busses/i2c-designware-core.c
> +++ b/drivers/i2c/busses/i2c-designware-core.c
> @@ -90,15 +90,15 @@
> #define DW_IC_INTR_DEFAULT_MASK (DW_IC_INTR_RX_FULL |
> \
> DW_IC_INTR_TX_ABRT | \
> DW_IC_INTR_STOP_DET)
> -
> +
> #define DW_IC_INTR_MASTER_MASK (DW_IC_INTR_DEFAULT_MAS
> K | \
> DW_IC_INTR_TX_EMPTY)
> -
> +
> #define DW_IC_INTR_SLAVE_MASK (DW_IC_INTR_DEFAULT_MASK
> | \
> DW_IC_INTR_RX_DONE | \
> - DW_IC_INTR_RX_UNDER | \
> - DW_IC_INTR_RD_REQ)
> -
> + DW_IC_INTR_RX_UNDER | \
> + DW_IC_INTR_RD_REQ)
> +
> #define DW_IC_STATUS_ACTIVITY 0x1
> #define DW_IC_STATUS_TFE BIT(2)
> #define DW_IC_STATUS_MASTER_ACTIVITY BIT(5)
> @@ -229,7 +229,7 @@ static void i2c_dw_configure_fifo_master(struct
> dw_i2c_dev *dev)
> dw_writel(dev, 0, DW_IC_RX_TL);
>
> /* configure the i2c master */
> - dw_writel(dev, dev->master_cfg , DW_IC_CON);
> + dw_writel(dev, dev->master_cfg, DW_IC_CON);
> dw_writel(dev, DW_IC_INTR_MASTER_MASK,
> DW_IC_INTR_MASK);
> }
>
> @@ -240,7 +240,7 @@ static void i2c_dw_configure_fifo_slave(struct
> dw_i2c_dev *dev)
> dw_writel(dev, 0, DW_IC_RX_TL);
>
> /* configure the i2c slave */
> - dw_writel(dev, dev->slave_cfg , DW_IC_CON);
> + dw_writel(dev, dev->slave_cfg, DW_IC_CON);
> dw_writel(dev, DW_IC_INTR_SLAVE_MASK,
> DW_IC_INTR_MASK);
> }
>
> @@ -386,8 +386,8 @@ int i2c_dw_init(struct dw_i2c_dev *dev)
> /* Configure register access mode 16bit */
> dev->accessor_flags |= ACCESS_16BIT;
> } else if (reg != DW_IC_COMP_TYPE_VALUE) {
> - dev_err(dev->dev, "Unknown Synopsys component type: "
> - "0x%08x\n", reg);
> + dev_err(dev->dev, "Unknown Synopsys component type:
> 0x%08x\n",
> + reg);
> i2c_dw_release_lock(dev);
> return -ENODEV;
> }
> @@ -475,7 +475,7 @@ int i2c_dw_init(struct dw_i2c_dev *dev)
> }
>
> if ((dev->master_cfg & DW_IC_CON_MASTER) &&
> - (dev->master_cfg & DW_IC_CON_SLAVE_DISABLE))
> + (dev->master_cfg & DW_IC_CON_SLAVE_DISABLE))
> i2c_dw_configure_fifo_master(dev);
> else
> i2c_dw_configure_fifo_slave(dev);
> @@ -814,6 +814,7 @@ done_nolock:
> static u32 i2c_dw_func(struct i2c_adapter *adap)
> {
> struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
> +
> return dev->functionality;
> }
>
> @@ -821,19 +822,19 @@ static int i2c_dw_reg_slave(struct i2c_client
> *slave)
> {
> struct dw_i2c_dev *dev = i2c_get_adapdata(slave->adapter);
>
> - if(dev->slave)
> + if (dev->slave)
> return -EBUSY;
> - if(slave->flags & I2C_CLIENT_TEN)
> + if (slave->flags & I2C_CLIENT_TEN)
> return -EAFNOSUPPORT;
> - /* set slave address in the IC_SAR register,
> - * the address to which the DW_apb_i2c responds */
> + /* set slave address in the IC_SAR register,
> + * the address to which the DW_apb_i2c responds */
>
> __i2c_dw_enable(dev, false);
> -
> +
> dw_writel(dev, slave->addr, DW_IC_SAR);
>
> pm_runtime_get_sync(dev->dev);
> -
> +
> dev->slave = slave;
>
> __i2c_dw_enable(dev, true);
> @@ -929,78 +930,76 @@ static u32 i2c_dw_read_clear_intrbits(struct
> dw_i2c_dev *dev)
> * Interrupt service routine. This gets called whenever an I2C
> interrupt
> * occurs.
> */
> -
> -static bool i2c_dw_irq_handler_slave(struct dw_i2c_dev *dev )
> +
> +static bool i2c_dw_irq_handler_slave(struct dw_i2c_dev *dev)
> {
> u32 raw_stat, stat, enabled;
> u8 val, slave_activity;
> -
> +
> stat = dw_readl(dev, DW_IC_INTR_STAT);
> enabled = dw_readl(dev, DW_IC_ENABLE);
> raw_stat = dw_readl(dev, DW_IC_RAW_INTR_STAT);
> - slave_activity = ((dw_readl(dev,DW_IC_STATUS) &
> - DW_IC_STATUS_SLAVE_ACTIVITY)>>6);
> -
> - dev_dbg(dev->dev,
> - "%s: %#x SLAVE_ACTV=%#x : RAW_INTR_STAT=%#x :
> INTR_STAT=%#x\n",
> - __func__, enabled, slave_activity, raw_stat, stat);
> + slave_activity = ((dw_readl(dev, DW_IC_STATUS)
> + & DW_IC_STATUS_SLAVE_ACTIVITY)>>6);
> +
> + dev_dbg(dev->dev,
> + "%s: %#x SLAVE_ACTV=%#x : RAW_INTR_STAT=%#x :
> INTR_STAT=%#x\n",
> + __func__, enabled, slave_activity, raw_stat, stat);
>
> if (stat & DW_IC_INTR_START_DET)
> dw_readl(dev, DW_IC_CLR_START_DET);
> -
> +
> if (stat & DW_IC_INTR_ACTIVITY)
> dw_readl(dev, DW_IC_CLR_ACTIVITY);
>
> if (stat & DW_IC_INTR_RX_OVER)
> dw_readl(dev, DW_IC_CLR_RX_OVER);
> -
> - if ((stat & DW_IC_INTR_RX_FULL) && (stat &
> DW_IC_INTR_STOP_DET))
> +
> + if ((stat & DW_IC_INTR_RX_FULL) && (stat &
> DW_IC_INTR_STOP_DET))
> i2c_slave_event(dev->slave,
> I2C_SLAVE_WRITE_REQUESTED, &val);
> -
> - if (slave_activity) {
> - if (stat & DW_IC_INTR_RD_REQ) {
> +
> + if (slave_activity) {
> + if (stat & DW_IC_INTR_RD_REQ) {
> if (stat & DW_IC_INTR_RX_FULL) {
> val = dw_readl(dev, DW_IC_DATA_CMD);
> - if (!i2c_slave_event(dev->slave,
> + if (!i2c_slave_event(dev->slave,
> I2C_SLAVE_WRITE_RECEIVED,
> &val)) {
> - dev_dbg(dev->dev, "Byte %X
> acked! ",val);
> + dev_dbg(dev->dev, "Byte %X
> acked! ", val);
> }
> dw_readl(dev, DW_IC_CLR_RD_REQ);
> stat =
> i2c_dw_read_clear_intrbits(dev);
> - }
> - else {
> + } else {
> dw_readl(dev, DW_IC_CLR_RD_REQ);
> dw_readl(dev, DW_IC_CLR_RX_UNDER);
> stat =
> i2c_dw_read_clear_intrbits(dev);
> - }
> - if (!i2c_slave_event(dev->slave,
> + }
> + if (!i2c_slave_event(dev->slave,
> I2C_SLAVE_READ_REQUESTED,
> &val))
> dw_writel(dev, val, DW_IC_DATA_CMD);
> }
> - }
> -
> + }
> +
> if (stat & DW_IC_INTR_RX_DONE) {
> -
> - if (!i2c_slave_event(dev->slave,
> I2C_SLAVE_READ_PROCESSED, &val))
> +
> + if (!i2c_slave_event(dev->slave,
> I2C_SLAVE_READ_PROCESSED, &val))
> dw_readl(dev, DW_IC_CLR_RX_DONE);
> -
> - i2c_slave_event(dev->slave, I2C_SLAVE_STOP , &val);
> +
> + i2c_slave_event(dev->slave, I2C_SLAVE_STOP, &val);
> stat = i2c_dw_read_clear_intrbits(dev);
>
> return true;
> }
> -
> - if (stat & DW_IC_INTR_RX_FULL) {
> +
> + if (stat & DW_IC_INTR_RX_FULL) {
> val = dw_readl(dev, DW_IC_DATA_CMD);
> if (!i2c_slave_event(dev->slave,
> I2C_SLAVE_WRITE_RECEIVED, &val))
> - dev_dbg(dev->dev, "Byte %X acked! ",val);
> - }
> - else {
> - i2c_slave_event(dev->slave, I2C_SLAVE_STOP , &val);
> + dev_dbg(dev->dev, "Byte %X acked! ", val);
> + } else {
> + i2c_slave_event(dev->slave, I2C_SLAVE_STOP, &val);
> stat = i2c_dw_read_clear_intrbits(dev);
> }
>
> - if (stat & DW_IC_INTR_TX_OVER) {
> + if (stat & DW_IC_INTR_TX_OVER) {
> dw_readl(dev, DW_IC_CLR_TX_OVER);
> return true;
> }
> @@ -1008,12 +1007,12 @@ static bool i2c_dw_irq_handler_slave(struct
> dw_i2c_dev *dev )
> return true;
> }
>
> -static bool i2c_dw_irq_handler_master(struct dw_i2c_dev *dev )
> +static bool i2c_dw_irq_handler_master(struct dw_i2c_dev *dev)
> {
> u32 stat;
> -
> +
> stat = i2c_dw_read_clear_intrbits(dev);
> -
> +
> if (stat & DW_IC_INTR_TX_ABRT) {
> dev->cmd_err |= DW_IC_ERR_TX_ABRT;
> dev->status = STATUS_IDLE;
> @@ -1068,17 +1067,17 @@ static irqreturn_t i2c_dw_isr(int this_irq,
> void *dev_id)
> enabled = dw_readl(dev, DW_IC_ENABLE);
> mode = dw_readl(dev, DW_IC_CON);
> stat = dw_readl(dev, DW_IC_RAW_INTR_STAT);
> -
> +
> dev_dbg(dev->dev, "%s: enabled=%#x stat=%#x\n", __func__,
> enabled, stat);
> if (!enabled || !(stat & ~DW_IC_INTR_ACTIVITY))
> return IRQ_NONE;
> -
> +
> if (!(mode & DW_IC_CON_MASTER) && !(mode &
> DW_IC_CON_SLAVE_DISABLE)) {
> stat = i2c_dw_read_clear_intrbits(dev);
> if (!i2c_dw_irq_handler_slave(dev))
> return IRQ_NONE;
> } else {
> - if(i2c_dw_irq_handler_master(dev))
> + if (i2c_dw_irq_handler_master(dev))
> return IRQ_HANDLED;
> }
>
> @@ -1148,7 +1147,7 @@ int i2c_dw_probe(struct dw_i2c_dev *dev)
> adap->dev.parent = dev->dev;
> i2c_set_adapdata(adap, dev);
>
> - if (!i2c_check_functionality(adap,I2C_FUNC_SLAVE))
> + if (!i2c_check_functionality(adap, I2C_FUNC_SLAVE))
> i2c_dw_disable_int(dev);
>
> r = devm_request_irq(dev->dev, dev->irq, i2c_dw_isr,
> diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c
> b/drivers/i2c/busses/i2c-designware-platdrv.c
> index f29e657..035b93f 100644
> --- a/drivers/i2c/busses/i2c-designware-platdrv.c
> +++ b/drivers/i2c/busses/i2c-designware-platdrv.c
> @@ -141,13 +141,13 @@ static inline int dw_i2c_acpi_configure(struct
> platform_device *pdev)
> static void i2c_dw_configure_master(struct platform_device *pdev)
> {
> struct dw_i2c_dev *dev = platform_get_drvdata(pdev);
> -
> +
> dev->master_cfg = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE
> |
> DW_IC_CON_RESTART_EN;
> -
> +
> dev->functionality |= I2C_FUNC_10BIT_ADDR;
> dev_info(&pdev->dev, "I am registed as a I2C Master!\n");
> -
> +
> switch (dev->clk_freq) {
> case 100000:
> dev->master_cfg |= DW_IC_CON_SPEED_STD;
> @@ -158,25 +158,25 @@ static void i2c_dw_configure_master(struct
> platform_device *pdev)
> default:
> dev->master_cfg |= DW_IC_CON_SPEED_FAST;
> }
> -
> +
> }
>
> static void i2c_dw_configure_slave(struct platform_device *pdev)
> {
> struct dw_i2c_dev *dev = platform_get_drvdata(pdev);
> -
> - dev->slave_cfg = DW_IC_CON_RX_FIFO_FULL_HLD_CTRL |
> - DW_IC_CON_RESTART_EN |
> DW_IC_CON_STOP_DET_IFADDRESSED |
> +
> + dev->slave_cfg = DW_IC_CON_RX_FIFO_FULL_HLD_CTRL |
> + DW_IC_CON_RESTART_EN |
> DW_IC_CON_STOP_DET_IFADDRESSED |
> DW_IC_CON_SPEED_FAST;
> -
> +
> dev->functionality |= I2C_FUNC_SLAVE;
> dev->functionality &= ~I2C_FUNC_10BIT_ADDR;
> dev_info(&pdev->dev, "I am registed as a I2C Slave!\n");
> -
> +
> switch (dev->clk_freq) {
> case 100000:
> dev->slave_cfg |= DW_IC_CON_SPEED_STD;
> -
> +
> case 3400000:
> dev->slave_cfg |= DW_IC_CON_SPEED_HIGH;
> break;
> @@ -272,10 +272,10 @@ static int dw_i2c_plat_probe(struct
> platform_device *pdev)
> I2C_FUNC_SMBUS_BYTE_DATA |
> I2C_FUNC_SMBUS_WORD_DATA |
> I2C_FUNC_SMBUS_I2C_BLOCK;
> -
> +
> if (is_slave)
> i2c_dw_configure_slave(pdev);
> - else
> + else
> i2c_dw_configure_master(pdev);
>
> dev->clk = devm_clk_get(&pdev->dev, NULL);
--
Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
Intel Finland Oy
Powered by blists - more mailing lists