lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20161021023720.GA11396@redhat.com>
Date:   Thu, 20 Oct 2016 22:37:20 -0400
From:   Jarod Wilson <jarod@...hat.com>
To:     "Michael S. Tsirkin" <mst@...hat.com>
Cc:     linux-kernel@...r.kernel.org, netdev@...r.kernel.org,
        virtualization@...ts.linux-foundation.org,
        "K. Y. Srinivasan" <kys@...rosoft.com>,
        Haiyang Zhang <haiyangz@...rosoft.com>,
        Shrikrishna Khare <skhare@...are.com>,
        "VMware, Inc." <pv-drivers@...are.com>,
        Wei Liu <wei.liu2@...rix.com>,
        Paul Durrant <paul.durrant@...rix.com>,
        David Kershner <david.kershner@...sys.com>,
        Aaron Conole <aconole@...heb.org>
Subject: Re: [PATCH net-next v2 6/9] net: use core MTU range checking in virt
 drivers

On Thu, Oct 20, 2016 at 11:23:54PM +0300, Michael S. Tsirkin wrote:
> On Thu, Oct 20, 2016 at 01:55:21PM -0400, Jarod Wilson wrote:
...
> > diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
> > index fad84f3..720809f 100644
> > --- a/drivers/net/virtio_net.c
> > +++ b/drivers/net/virtio_net.c
> > @@ -1419,17 +1419,6 @@ static const struct ethtool_ops virtnet_ethtool_ops = {
> >  	.set_settings = virtnet_set_settings,
> >  };
> >  
> > -#define MIN_MTU 68
> > -#define MAX_MTU 65535
> > -
> > -static int virtnet_change_mtu(struct net_device *dev, int new_mtu)
> > -{
> > -	if (new_mtu < MIN_MTU || new_mtu > MAX_MTU)
> > -		return -EINVAL;
> > -	dev->mtu = new_mtu;
> > -	return 0;
> > -}
> > -
> >  static const struct net_device_ops virtnet_netdev = {
> >  	.ndo_open            = virtnet_open,
> >  	.ndo_stop   	     = virtnet_close,
> > @@ -1437,7 +1426,6 @@ static const struct net_device_ops virtnet_netdev = {
> >  	.ndo_validate_addr   = eth_validate_addr,
> >  	.ndo_set_mac_address = virtnet_set_mac_address,
> >  	.ndo_set_rx_mode     = virtnet_set_rx_mode,
> > -	.ndo_change_mtu	     = virtnet_change_mtu,
> >  	.ndo_get_stats64     = virtnet_stats,
> >  	.ndo_vlan_rx_add_vid = virtnet_vlan_rx_add_vid,
> >  	.ndo_vlan_rx_kill_vid = virtnet_vlan_rx_kill_vid,
> > @@ -1748,6 +1736,9 @@ static bool virtnet_validate_features(struct virtio_device *vdev)
> >  	return true;
> >  }
> >  
> > +#define MIN_MTU ETH_MIN_MTU
> > +#define MAX_MTU ETH_MAX_MTU
> > +
> 
> Can we drop these btw?

Bah. Yeah. Should have just used them directly. I didn't add ETH_MAX_MTU
until after doing the virtio_net changes, so I missed that.

> >  static int virtnet_probe(struct virtio_device *vdev)
> >  {
> >  	int i, err;
> > @@ -1821,6 +1812,10 @@ static int virtnet_probe(struct virtio_device *vdev)
> >  
> >  	dev->vlan_features = dev->features;
> >  
> > +	/* MTU range: 68 - 65535 */
> > +	dev->min_mtu = MIN_MTU;
> > +	dev->max_mtu = MAX_MTU;
> > +
> >  	/* Configuration may specify what MAC to use.  Otherwise random. */
> >  	if (virtio_has_feature(vdev, VIRTIO_NET_F_MAC))
> >  		virtio_cread_bytes(vdev,
> > @@ -1875,8 +1870,10 @@ static int virtnet_probe(struct virtio_device *vdev)
> >  		mtu = virtio_cread16(vdev,
> >  				     offsetof(struct virtio_net_config,
> >  					      mtu));
> > -		if (virtnet_change_mtu(dev, mtu))
> > +		if (mtu < dev->min_mtu || mtu > dev->max_mtu)
> 
> In fact the > max_mtu branch does not make sense since a 16 bit
> value can't exceed MAX_MTU.

Hm. mtu is declared as an int, not sure if there's any sort of type
promotion to be worried about (not an area I know much/anything about).
Certainly something that could be looked into as a minor optimization,
though it's only in a probe path and shouldn't hurt anything, so ... meh?

-- 
Jarod Wilson
jarod@...hat.com

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ