| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <917e2f75-a87a-e7e4-9387-f2e1dcbec1c7@kernel.org>
Date: Sat, 22 Oct 2016 19:35:50 +0100
From: Jonathan Cameron <jic23@...nel.org>
To: Alison Schofield <amsfield22@...il.com>
Cc: mranostay@...il.com, knaack.h@....de, lars@...afoo.de,
pmeerw@...erw.net, linux-iio@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v4] iio: humidity: hdc100x: add triggered buffer support
for HDC100X
On 18/10/16 16:48, Alison Schofield wrote:
> On Sat, Sep 03, 2016 at 08:37:27PM +0100, Jonathan Cameron wrote:
>> On 02/09/16 18:23, Alison Schofield wrote:
>>> Triggered buffer support uses the HDC100X's dual acquisition mode
>>> to read both humidity and temperature in one shot.
>>>
>>> This patch depends on
>>> 447136effbf4 ("iio: humidity: hdc100x: fix sensor data reads of
>>> temp and humidity")
>>>
>>> Signed-off-by: Alison Schofield <amsfield22@...il.com>
>>> Cc: Daniel Baluta <daniel.baluta@...il.com>
>> Looks good. I'll have to hold it until the dependency has worked it's way
>> into my togreg branch in a week or so.
>>
>> Feel free to remind me!
>>
>> Jonathan
>
> It's safe to take this one now. Thanks!
Excellent. Good thing you reminded me. Was a long enough ago I didn't
see it when scanning back through my emails looking for stuff I'd marked
to deal with later!
Applied to the togreg branch of iio.git and pushed out as testing for
the autobuilders to deal with it.
thanks,
Jonathan
> alisons
>
>>> ---
>>>
>>> Changes in v4:
>>> - unlock private lock if claim_direct_mode fails (kbuild robot reported)
>>> - move unlock to err: out path in trigger handler (kbuild robot inspired)
>>>
>>> Changes in v3:
>>> Thanks for the review Jonathan
>>> - This patch now depends on
>>> 447136effbf4 ("iio: humidity: hdc100x: fix sensor data reads of temp
>>> and humidity")
>>> - remove i2c functionality check, done in dependent patch
>>> - remove unused define HDC100X_ALL_CHANNEL_MASK
>>> - define and use available_scan_masks to demux between temp &/or humid
>>> data in buffered mode
>>> - changed timestamp channel scan_index from 3 to 2.
>>> - put back private data lock in read_raw
>>> (we'll lock private data lock and claim_direct_mode on raw reads)
>>> - remove unneeded NULL parameters in iio_buffer_setup_ops
>>> - add private data lock on buffered read
>>> We are going to allow configuration changes while the sensor is in
>>> buffered mode. We need to allow the toggling of the Heater Enable bit
>>> because the heater only functions during measurements. The lock will
>>> ensure that the config change and buffer read transaction do not collide.
>>> - blank lines added for readability per reviewer
>>>
>>> Changes in v2:
>>> Thanks for the review Peter
>>> - switched endianness from IIO_CPU to IIO_BE
>>> - use only one buffer in the handler
>>> - simplify selection of temp &/or humidity to push to buffer
>>>
>>>
>>> drivers/iio/humidity/Kconfig | 2 +
>>> drivers/iio/humidity/hdc100x.c | 130 ++++++++++++++++++++++++++++++++++++++++-
>>> 2 files changed, 130 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/drivers/iio/humidity/Kconfig b/drivers/iio/humidity/Kconfig
>>> index f155386..5a25569 100644
>>> --- a/drivers/iio/humidity/Kconfig
>>> +++ b/drivers/iio/humidity/Kconfig
>>> @@ -25,6 +25,8 @@ config DHT11
>>> config HDC100X
>>> tristate "TI HDC100x relative humidity and temperature sensor"
>>> depends on I2C
>>> + select IIO_BUFFER
>>> + select IIO_TRIGGERED_BUFFER
>>> help
>>> Say yes here to build support for the Texas Instruments
>>> HDC1000 and HDC1008 relative humidity and temperature sensors.
>>> diff --git a/drivers/iio/humidity/hdc100x.c b/drivers/iio/humidity/hdc100x.c
>>> index e0c9c70..265c34d 100644
>>> --- a/drivers/iio/humidity/hdc100x.c
>>> +++ b/drivers/iio/humidity/hdc100x.c
>>> @@ -22,11 +22,15 @@
>>>
>>> #include <linux/iio/iio.h>
>>> #include <linux/iio/sysfs.h>
>>> +#include <linux/iio/buffer.h>
>>> +#include <linux/iio/trigger_consumer.h>
>>> +#include <linux/iio/triggered_buffer.h>
>>>
>>> #define HDC100X_REG_TEMP 0x00
>>> #define HDC100X_REG_HUMIDITY 0x01
>>>
>>> #define HDC100X_REG_CONFIG 0x02
>>> +#define HDC100X_REG_CONFIG_ACQ_MODE BIT(12)
>>> #define HDC100X_REG_CONFIG_HEATER_EN BIT(13)
>>>
>>> struct hdc100x_data {
>>> @@ -87,22 +91,40 @@ static const struct iio_chan_spec hdc100x_channels[] = {
>>> BIT(IIO_CHAN_INFO_SCALE) |
>>> BIT(IIO_CHAN_INFO_INT_TIME) |
>>> BIT(IIO_CHAN_INFO_OFFSET),
>>> + .scan_index = 0,
>>> + .scan_type = {
>>> + .sign = 's',
>>> + .realbits = 16,
>>> + .storagebits = 16,
>>> + .endianness = IIO_BE,
>>> + },
>>> },
>>> {
>>> .type = IIO_HUMIDITYRELATIVE,
>>> .address = HDC100X_REG_HUMIDITY,
>>> .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
>>> BIT(IIO_CHAN_INFO_SCALE) |
>>> - BIT(IIO_CHAN_INFO_INT_TIME)
>>> + BIT(IIO_CHAN_INFO_INT_TIME),
>>> + .scan_index = 1,
>>> + .scan_type = {
>>> + .sign = 'u',
>>> + .realbits = 16,
>>> + .storagebits = 16,
>>> + .endianness = IIO_BE,
>>> + },
>>> },
>>> {
>>> .type = IIO_CURRENT,
>>> .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
>>> .extend_name = "heater",
>>> .output = 1,
>>> + .scan_index = -1,
>>> },
>>> + IIO_CHAN_SOFT_TIMESTAMP(2),
>>> };
>>>
>>> +static const unsigned long hdc100x_scan_masks[] = {0x3, 0};
>>> +
>>> static int hdc100x_update_config(struct hdc100x_data *data, int mask, int val)
>>> {
>>> int tmp = (~mask & data->config) | val;
>>> @@ -183,7 +205,14 @@ static int hdc100x_read_raw(struct iio_dev *indio_dev,
>>> *val = hdc100x_get_heater_status(data);
>>> ret = IIO_VAL_INT;
>>> } else {
>>> + ret = iio_device_claim_direct_mode(indio_dev);
>>> + if (ret) {
>>> + mutex_unlock(&data->lock);
>>> + return ret;
>>> + }
>>> +
>>> ret = hdc100x_get_measurement(data, chan);
>>> + iio_device_release_direct_mode(indio_dev);
>>> if (ret >= 0) {
>>> *val = ret;
>>> ret = IIO_VAL_INT;
>>> @@ -246,6 +275,78 @@ static int hdc100x_write_raw(struct iio_dev *indio_dev,
>>> }
>>> }
>>>
>>> +static int hdc100x_buffer_postenable(struct iio_dev *indio_dev)
>>> +{
>>> + struct hdc100x_data *data = iio_priv(indio_dev);
>>> + int ret;
>>> +
>>> + /* Buffer is enabled. First set ACQ Mode, then attach poll func */
>>> + mutex_lock(&data->lock);
>>> + ret = hdc100x_update_config(data, HDC100X_REG_CONFIG_ACQ_MODE,
>>> + HDC100X_REG_CONFIG_ACQ_MODE);
>>> + mutex_unlock(&data->lock);
>>> + if (ret)
>>> + return ret;
>>> +
>>> + return iio_triggered_buffer_postenable(indio_dev);
>>> +}
>>> +
>>> +static int hdc100x_buffer_predisable(struct iio_dev *indio_dev)
>>> +{
>>> + struct hdc100x_data *data = iio_priv(indio_dev);
>>> + int ret;
>>> +
>>> + /* First detach poll func, then reset ACQ mode. OK to disable buffer */
>>> + ret = iio_triggered_buffer_predisable(indio_dev);
>>> + if (ret)
>>> + return ret;
>>> +
>>> + mutex_lock(&data->lock);
>>> + ret = hdc100x_update_config(data, HDC100X_REG_CONFIG_ACQ_MODE, 0);
>>> + mutex_unlock(&data->lock);
>>> +
>>> + return ret;
>>> +}
>>> +
>>> +static const struct iio_buffer_setup_ops hdc_buffer_setup_ops = {
>>> + .postenable = hdc100x_buffer_postenable,
>>> + .predisable = hdc100x_buffer_predisable,
>>> +};
>>> +
>>> +static irqreturn_t hdc100x_trigger_handler(int irq, void *p)
>>> +{
>>> + struct iio_poll_func *pf = p;
>>> + struct iio_dev *indio_dev = pf->indio_dev;
>>> + struct hdc100x_data *data = iio_priv(indio_dev);
>>> + struct i2c_client *client = data->client;
>>> + int delay = data->adc_int_us[0] + data->adc_int_us[1];
>>> + int ret;
>>> + s16 buf[8]; /* 2x s16 + padding + 8 byte timestamp */
>>> +
>>> + /* dual read starts at temp register */
>>> + mutex_lock(&data->lock);
>>> + ret = i2c_smbus_write_byte(client, HDC100X_REG_TEMP);
>>> + if (ret < 0) {
>>> + dev_err(&client->dev, "cannot start measurement\n");
>>> + goto err;
>>> + }
>>> + usleep_range(delay, delay + 1000);
>>> +
>>> + ret = i2c_master_recv(client, (u8 *)buf, 4);
>>> + if (ret < 0) {
>>> + dev_err(&client->dev, "cannot read sensor data\n");
>>> + goto err;
>>> + }
>>> +
>>> + iio_push_to_buffers_with_timestamp(indio_dev, buf,
>>> + iio_get_time_ns(indio_dev));
>>> +err:
>>> + mutex_unlock(&data->lock);
>>> + iio_trigger_notify_done(indio_dev->trig);
>>> +
>>> + return IRQ_HANDLED;
>>> +}
>>> +
>>> static const struct iio_info hdc100x_info = {
>>> .read_raw = hdc100x_read_raw,
>>> .write_raw = hdc100x_write_raw,
>>> @@ -258,6 +359,7 @@ static int hdc100x_probe(struct i2c_client *client,
>>> {
>>> struct iio_dev *indio_dev;
>>> struct hdc100x_data *data;
>>> + int ret;
>>>
>>> if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA |
>>> I2C_FUNC_SMBUS_BYTE | I2C_FUNC_I2C))
>>> @@ -279,12 +381,35 @@ static int hdc100x_probe(struct i2c_client *client,
>>>
>>> indio_dev->channels = hdc100x_channels;
>>> indio_dev->num_channels = ARRAY_SIZE(hdc100x_channels);
>>> + indio_dev->available_scan_masks = hdc100x_scan_masks;
>>>
>>> /* be sure we are in a known state */
>>> hdc100x_set_it_time(data, 0, hdc100x_int_time[0][0]);
>>> hdc100x_set_it_time(data, 1, hdc100x_int_time[1][0]);
>>> + hdc100x_update_config(data, HDC100X_REG_CONFIG_ACQ_MODE, 0);
>>> +
>>> + ret = iio_triggered_buffer_setup(indio_dev, NULL,
>>> + hdc100x_trigger_handler,
>>> + &hdc_buffer_setup_ops);
>>> + if (ret < 0) {
>>> + dev_err(&client->dev, "iio triggered buffer setup failed\n");
>>> + return ret;
>>> + }
>>> + ret = iio_device_register(indio_dev);
>>> + if (ret < 0)
>>> + iio_triggered_buffer_cleanup(indio_dev);
>>> +
>>> + return ret;
>>> +}
>>> +
>>> +static int hdc100x_remove(struct i2c_client *client)
>>> +{
>>> + struct iio_dev *indio_dev = i2c_get_clientdata(client);
>>> +
>>> + iio_device_unregister(indio_dev);
>>> + iio_triggered_buffer_cleanup(indio_dev);
>>>
>>> - return devm_iio_device_register(&client->dev, indio_dev);
>>> + return 0;
>>> }
>>>
>>> static const struct i2c_device_id hdc100x_id[] = {
>>> @@ -298,6 +423,7 @@ static struct i2c_driver hdc100x_driver = {
>>> .name = "hdc100x",
>>> },
>>> .probe = hdc100x_probe,
>>> + .remove = hdc100x_remove,
>>> .id_table = hdc100x_id,
>>> };
>>> module_i2c_driver(hdc100x_driver);
>>>
>>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
Powered by blists - more mailing lists