linux-kernel - Re: Reset implementation for Zynq

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1477299605.2446.11.camel@pengutronix.de>
Date:   Mon, 24 Oct 2016 11:00:05 +0200
From:   Philipp Zabel <p.zabel@...gutronix.de>
To:     Moritz Fischer <moritz.fischer@...us.com>
Cc:     iztok.jeras@...pitaya.com, linux-kernel@...r.kernel.org
Subject: Re: Reset implementation for Zynq

Hi Iztok, Moritz,

Am Freitag, den 21.10.2016, 10:04 -0700 schrieb Moritz Fischer:
> Iztok,
> 
> On Fri, Oct 21, 2016 at 03:08:47AM -0700, iztok.jeras@...pitaya.com wrote:
> > Hi Moritz,
> >  
> > I was looking at your reset implementation for Zynq:
> > https://github.com/Xilinx/linux-xlnx/blob/629041605b93343ad2e8971ceaac3edcef0b043b/drivers/reset/reset-zynq.c
> > I went through related mailing list posts (including earlier versions of the patch) so I kind of understand what to change in the device tree.
> 
> Please look at the upstream kernel sources and use the mailing list
> (lkml) if you want to report bugs. Xilinx' vendor tree might or might
> not be up to date.
> 
> > I would like to use this driver to reset the Zynq I2C controller, since we have trouble with it getting into a lock up state.
> > I plan to use function device_reset_optional() from:
> > https://github.com/Xilinx/linux-xlnx/blob/629041605b93343ad2e8971ceaac3edcef0b043b/include/linux/reset.h
> >  
> > But this function is calling the reset function pointer from the reset_control_ops structure.
> > For the zynq driver this function pointer is not defined, only assert, deassert and status are.
> >  
> > Is this a missing implementation, or is there a default implementation (I did not find one) which which performs an assert+deassert,
> > or is there another set of reset APIs I should use inside the kernel.
> 
> You could just call reset_control_assert() and reset_control_deassert().
> You're right there is currently no implementation for the 'reset' function for
> zynq (and most of the other SoCs). I'll need to see if it makes sense at
> all.

The implementation of reset_control_reset in software really only makes
sense if the reset provider driver knows about the necessary delays for
all reset consumers.

> Please note that you'd probably have to modify the i2c driver to
> integrate reset functionality cleanly.
> 
> Thanks,
> 
> Moritz

regards
Philipp