[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1477283492-26657-3-git-send-email-okaya@codeaurora.org>
Date: Mon, 24 Oct 2016 00:31:31 -0400
From: Sinan Kaya <okaya@...eaurora.org>
To: linux-acpi@...r.kernel.org, rjw@...ysocki.net, bhelgaas@...gle.com,
ravikanth.nalla@....com, linux@...nbow-software.org,
timur@...eaurora.org, cov@...eaurora.org, jcm@...hat.com,
alex.williamson@...hat.com
Cc: net147@...il.com, linux-pci@...r.kernel.org, agross@...eaurora.org,
linux-arm-msm@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, wim@....tudelft.nl,
Sinan Kaya <okaya@...eaurora.org>,
Len Brown <len.brown@...el.com>, Pavel Machek <pavel@....cz>,
Thomas Gleixner <tglx@...utronix.de>,
Ingo Molnar <mingo@...hat.com>,
"H. Peter Anvin" <hpa@...or.com>, x86@...nel.org,
linux-pm@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH V5 2/3] ACPI: pci_link: penalize SCI correctly
Ondrej reported that IRQs stopped working in v4.7 on several
platforms. A typical scenario, from Ondrej's VT82C694X/694X, is:
ACPI: Using PIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: No IRQ available for PCI Interrupt Link [LNKA]
8139too 0000:00:0f.0: PCI INT A: no GSI
We're using PIC routing, so acpi_irq_balance == 0, and LNKA is already
active at IRQ 11. In that case, acpi_pci_link_allocate() only tries
to use the active IRQ (IRQ 11) which also happens to be the SCI.
We should penalize the SCI by PIRQ_PENALTY_PCI_USING, but
irq_get_trigger_type(11) returns something other than
IRQ_TYPE_LEVEL_LOW, so we penalize it by PIRQ_PENALTY_ISA_ALWAYS
instead, which makes acpi_pci_link_allocate() assume the IRQ isn't
available and give up.
Add acpi_penalize_sci_irq() so platforms can tell us the SCI IRQ,
trigger, and polarity directly and we don't have to depend on
irq_get_trigger_type().
Link: http://lkml.kernel.org/r/201609251512.05657.linux@rainbow-software.org
Reported-by: Ondrej Zary <linux@...nbow-software.org>
Acked-by: Bjorn Helgaas <bhelgaas@...gle.com>
Signed-off-by: Sinan Kaya <okaya@...eaurora.org>
---
arch/x86/kernel/acpi/boot.c | 1 +
drivers/acpi/pci_link.c | 30 +++++++++++++++---------------
include/linux/acpi.h | 1 +
3 files changed, 17 insertions(+), 15 deletions(-)
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 90d84c3..0ffd26e 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -453,6 +453,7 @@ static void __init acpi_sci_ioapic_setup(u8 bus_irq, u16 polarity, u16 trigger,
polarity = acpi_sci_flags & ACPI_MADT_POLARITY_MASK;
mp_override_legacy_irq(bus_irq, polarity, trigger, gsi);
+ acpi_penalize_sci_irq(bus_irq, trigger, polarity);
/*
* stash over-ride to indicate we've been here
diff --git a/drivers/acpi/pci_link.c b/drivers/acpi/pci_link.c
index 6229b02..74bf96e 100644
--- a/drivers/acpi/pci_link.c
+++ b/drivers/acpi/pci_link.c
@@ -87,6 +87,7 @@ struct acpi_pci_link {
static LIST_HEAD(acpi_link_list);
static DEFINE_MUTEX(acpi_link_lock);
+static int sci_irq = -1, sci_penalty;
/* --------------------------------------------------------------------------
PCI Link Device Management
@@ -496,25 +497,13 @@ static int acpi_irq_get_penalty(int irq)
{
int penalty = 0;
- /*
- * Penalize IRQ used by ACPI SCI. If ACPI SCI pin attributes conflict
- * with PCI IRQ attributes, mark ACPI SCI as ISA_ALWAYS so it won't be
- * use for PCI IRQs.
- */
- if (irq == acpi_gbl_FADT.sci_interrupt) {
- u32 type = irq_get_trigger_type(irq) & IRQ_TYPE_SENSE_MASK;
-
- if (type != IRQ_TYPE_LEVEL_LOW)
- penalty += PIRQ_PENALTY_ISA_ALWAYS;
- else
- penalty += PIRQ_PENALTY_PCI_USING;
- }
+ if (irq == sci_irq)
+ penalty += sci_penalty;
if (irq < ACPI_MAX_ISA_IRQS)
return penalty + acpi_isa_irq_penalty[irq];
- penalty += acpi_irq_pci_sharing_penalty(irq);
- return penalty;
+ return penalty + acpi_irq_pci_sharing_penalty(irq);
}
int __init acpi_irq_penalty_init(void)
@@ -881,6 +870,17 @@ bool acpi_isa_irq_available(int irq)
acpi_irq_get_penalty(irq) < PIRQ_PENALTY_ISA_ALWAYS);
}
+void acpi_penalize_sci_irq(int irq, int trigger, int polarity)
+{
+ sci_irq = irq;
+
+ if (trigger == ACPI_MADT_TRIGGER_LEVEL &&
+ polarity == ACPI_MADT_POLARITY_ACTIVE_LOW)
+ sci_penalty = PIRQ_PENALTY_PCI_USING;
+ else
+ sci_penalty = PIRQ_PENALTY_ISA_ALWAYS;
+}
+
/*
* Over-ride default table to reserve additional IRQs for use by ISA
* e.g. acpi_irq_isa=5
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index c5eaf2f..67d1d3e 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -318,6 +318,7 @@ struct pci_dev;
int acpi_pci_irq_enable (struct pci_dev *dev);
void acpi_penalize_isa_irq(int irq, int active);
bool acpi_isa_irq_available(int irq);
+void acpi_penalize_sci_irq(int irq, int trigger, int polarity);
void acpi_pci_irq_disable (struct pci_dev *dev);
extern int ec_read(u8 addr, u8 *val);
--
1.9.1
Powered by blists - more mailing lists