| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1477549785-4972-8-git-send-email-l.majewski@majess.pl>
Date: Thu, 27 Oct 2016 08:29:43 +0200
From: Lukasz Majewski <l.majewski@...ess.pl>
To: Thierry Reding <thierry.reding@...il.com>,
Stefan Agner <stefan@...er.ch>,
Boris Brezillon <boris.brezillon@...e-electrons.com>
Cc: linux-pwm@...r.kernel.org, linux-kernel@...r.kernel.org,
Fabio Estevam <fabio.estevam@....com>,
Fabio Estevam <festevam@...il.com>,
Lothar Wassmann <LW@...o-electronics.de>,
Bhuvanchandra DV <bhuvanchandra.dv@...adex.com>,
kernel@...gutronix.de, Lukasz Majewski <l.majewski@...ess.pl>
Subject: [PATCH v2 07/10] pwm: imx: Remove redundant i.MX PWMv2 code
The code providing functionality surpassed by the atomic PWM is not needed
anymore and hence can be removed.
Suggested-by: Stefan Agner <stefan@...er.ch>
Suggested-by: Boris Brezillon <boris.brezillon@...e-electrons.com>
Signed-off-by: Lukasz Majewski <l.majewski@...ess.pl>
Reviewed-by: Boris Brezillon <boris.brezillon@...e-electrons.com>
---
Changes for v2:
- None
---
drivers/pwm/pwm-imx.c | 127 --------------------------------------------------
1 file changed, 127 deletions(-)
diff --git a/drivers/pwm/pwm-imx.c b/drivers/pwm/pwm-imx.c
index 6b7d2f1..0132439a 100644
--- a/drivers/pwm/pwm-imx.c
+++ b/drivers/pwm/pwm-imx.c
@@ -54,10 +54,6 @@ struct imx_chip {
void __iomem *mmio_base;
struct pwm_chip chip;
-
- int (*config)(struct pwm_chip *chip,
- struct pwm_device *pwm, int duty_ns, int period_ns);
- void (*set_enable)(struct pwm_chip *chip, bool enable);
};
#define to_imx_chip(chip) container_of(chip, struct imx_chip, chip)
@@ -249,118 +245,6 @@ static int imx_pwm_apply_v2(struct pwm_chip *chip, struct pwm_device *pwm,
return 0;
}
-static int imx_pwm_config_v2(struct pwm_chip *chip,
- struct pwm_device *pwm, int duty_ns, int period_ns)
-{
- struct imx_chip *imx = to_imx_chip(chip);
- unsigned long long c;
- unsigned long period_cycles, duty_cycles, prescale;
- bool enable = pwm_is_enabled(pwm);
- u32 cr;
-
- /*
- * i.MX PWMv2 has a 4-word sample FIFO.
- * In order to avoid FIFO overflow issue, we do software reset
- * to clear all sample FIFO if the controller is disabled or
- * wait for a full PWM cycle to get a relinquished FIFO slot
- * when the controller is enabled and the FIFO is fully loaded.
- */
- if (enable)
- imx_pwm_wait_fifo_slot(chip, pwm);
- else
- imx_pwm_sw_reset(chip);
-
- c = clk_get_rate(imx->clk_per);
- c = c * period_ns;
- do_div(c, 1000000000);
- period_cycles = c;
-
- prescale = period_cycles / 0x10000 + 1;
-
- period_cycles /= prescale;
- c = (unsigned long long)period_cycles * duty_ns;
- do_div(c, period_ns);
- duty_cycles = c;
-
- /*
- * according to imx pwm RM, the real period value should be
- * PERIOD value in PWMPR plus 2.
- */
- if (period_cycles > 2)
- period_cycles -= 2;
- else
- period_cycles = 0;
-
- writel(duty_cycles, imx->mmio_base + MX3_PWMSAR);
- writel(period_cycles, imx->mmio_base + MX3_PWMPR);
-
- cr = MX3_PWMCR_PRESCALER(prescale) |
- MX3_PWMCR_DOZEEN | MX3_PWMCR_WAITEN |
- MX3_PWMCR_DBGEN | MX3_PWMCR_CLKSRC_IPG_HIGH;
-
- if (enable)
- cr |= MX3_PWMCR_EN;
-
- writel(cr, imx->mmio_base + MX3_PWMCR);
-
- return 0;
-}
-
-static void imx_pwm_set_enable_v2(struct pwm_chip *chip, bool enable)
-{
- struct imx_chip *imx = to_imx_chip(chip);
- u32 val;
-
- val = readl(imx->mmio_base + MX3_PWMCR);
-
- if (enable)
- val |= MX3_PWMCR_EN;
- else
- val &= ~MX3_PWMCR_EN;
-
- writel(val, imx->mmio_base + MX3_PWMCR);
-}
-
-static int imx_pwm_config(struct pwm_chip *chip,
- struct pwm_device *pwm, int duty_ns, int period_ns)
-{
- struct imx_chip *imx = to_imx_chip(chip);
- int ret;
-
- ret = clk_prepare_enable(imx->clk_ipg);
- if (ret)
- return ret;
-
- ret = imx->config(chip, pwm, duty_ns, period_ns);
-
- clk_disable_unprepare(imx->clk_ipg);
-
- return ret;
-}
-
-static int imx_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
-{
- struct imx_chip *imx = to_imx_chip(chip);
- int ret;
-
- ret = clk_prepare_enable(imx->clk_per);
- if (ret)
- return ret;
-
- imx->set_enable(chip, true);
-
- return 0;
-}
-
-static void imx_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
-{
- struct imx_chip *imx = to_imx_chip(chip);
-
- imx->set_enable(chip, false);
-
- clk_disable_unprepare(imx->clk_per);
-}
-
static struct pwm_ops imx_pwm_ops_v1 = {
.enable = imx_pwm_enable_v1,
.disable = imx_pwm_disable_v1,
@@ -369,17 +253,11 @@ static struct pwm_ops imx_pwm_ops_v1 = {
};
static struct pwm_ops imx_pwm_ops_v2 = {
- .enable = imx_pwm_enable,
- .disable = imx_pwm_disable,
- .config = imx_pwm_config,
.apply = imx_pwm_apply_v2,
.owner = THIS_MODULE,
};
struct imx_pwm_data {
- int (*config)(struct pwm_chip *chip,
- struct pwm_device *pwm, int duty_ns, int period_ns);
- void (*set_enable)(struct pwm_chip *chip, bool enable);
struct pwm_ops *pwm_ops;
};
@@ -388,8 +266,6 @@ static struct imx_pwm_data imx_pwm_data_v1 = {
};
static struct imx_pwm_data imx_pwm_data_v2 = {
- .config = imx_pwm_config_v2,
- .set_enable = imx_pwm_set_enable_v2,
.pwm_ops = &imx_pwm_ops_v2,
};
@@ -443,9 +319,6 @@ static int imx_pwm_probe(struct platform_device *pdev)
if (IS_ERR(imx->mmio_base))
return PTR_ERR(imx->mmio_base);
- imx->config = data->config;
- imx->set_enable = data->set_enable;
-
ret = pwmchip_add(&imx->chip);
if (ret < 0)
return ret;
--
2.1.4
Powered by blists - more mailing lists