linux-kernel - [PATCH v3 4/4] ARM: dts: da850: Add the usb otg device node

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1477560847-8929-5-git-send-email-abailon@baylibre.com>
Date:   Thu, 27 Oct 2016 11:34:07 +0200
From:   Alexandre Bailon <abailon@...libre.com>
To:     khilman@...libre.com, robh+dt@...nel.org, b-liu@...com
Cc:     linux-kernel@...r.kernel.org, linux-usb@...r.kernel.org,
        devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        Alexandre Bailon <abailon@...libre.com>
Subject: [PATCH v3 4/4] ARM: dts: da850: Add the usb otg device node

This adds the device tree node for the usb otg
controller present in the da850 family of SoC's.
This also enables the otg usb controller for the lcdk board.

Signed-off-by: Alexandre Bailon <abailon@...libre.com>
---
 arch/arm/boot/dts/da850-lcdk.dts |  8 ++++++++
 arch/arm/boot/dts/da850.dtsi     | 15 +++++++++++++++
 2 files changed, 23 insertions(+)

diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts
index 7b8ab21..9f5040c 100644
--- a/arch/arm/boot/dts/da850-lcdk.dts
+++ b/arch/arm/boot/dts/da850-lcdk.dts
@@ -158,6 +158,14 @@
 	rx-num-evt = <32>;
 };
 
+&usb_phy {
+	status = "okay";
+	};
+
+&usb0 {
+	status = "okay";
+};
+
 &aemif {
 	pinctrl-names = "default";
 	pinctrl-0 = <&nand_pins>;
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index f79e1b9..322a31a 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -372,6 +372,21 @@
 					>;
 			status = "disabled";
 		};
+		usb_phy: usb-phy {
+			compatible = "ti,da830-usb-phy";
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+		usb0: usb@...000 {
+			compatible = "ti,da830-musb";
+			reg = <0x200000 0x10000>;
+			interrupts = <58>;
+			interrupt-names = "mc";
+			dr_mode = "otg";
+			phys = <&usb_phy 0>;
+			phy-names = "usb-phy";
+			status = "disabled";
+		};
 		gpio: gpio@...000 {
 			compatible = "ti,dm6441-gpio";
 			gpio-controller;
-- 
2.7.3