| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 27 Oct 2016 19:51:54 +0200
From: Maxime Ripard <maxime.ripard@...e-electrons.com>
To: Jean-Francois Moine <moinejf@...e.fr>
Cc: Mylène Josserand
<mylene.josserand@...e-electrons.com>, vinod.koul@...el.com,
wens@...e.org, mturquette@...libre.com, sboyd@...eaurora.org,
lgirdwood@...il.com, broonie@...nel.org, perex@...ex.cz,
tiwai@...e.com, lee.jones@...aro.org, mark.rutland@....com,
robh+dt@...nel.org, thomas.petazzoni@...e-electrons.com,
devicetree@...r.kernel.org, alsa-devel@...a-project.org,
linux-kernel@...r.kernel.org, linux-sunxi@...glegroups.com,
alexandre.belloni@...e-electrons.com, dmaengine@...r.kernel.org,
linux-clk@...r.kernel.org, linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH 01/14] dma: sun6i-dma: Add burst case of 4
On Sun, Oct 23, 2016 at 06:31:07PM +0200, Jean-Francois Moine wrote:
> On Tue, 4 Oct 2016 18:55:54 +0200
> Maxime Ripard <maxime.ripard@...e-electrons.com> wrote:
>
> > On Tue, Oct 04, 2016 at 12:40:11PM +0200, Jean-Francois Moine wrote:
> > > On Tue, 4 Oct 2016 11:46:14 +0200
> > > Mylène Josserand <mylene.josserand@...e-electrons.com> wrote:
> > >
> > > > Add the case of a burst of 4 which is handled by the SoC.
> > > >
> > > > Signed-off-by: Mylène Josserand <mylene.josserand@...e-electrons.com>
> > > > ---
> > > > drivers/dma/sun6i-dma.c | 2 ++
> > > > 1 file changed, 2 insertions(+)
> > > >
> > > > diff --git a/drivers/dma/sun6i-dma.c b/drivers/dma/sun6i-dma.c
> > > > index 8346199..0485204 100644
> > > > --- a/drivers/dma/sun6i-dma.c
> > > > +++ b/drivers/dma/sun6i-dma.c
> > > > @@ -240,6 +240,8 @@ static inline s8 convert_burst(u32 maxburst)
> > > > switch (maxburst) {
> > > > case 1:
> > > > return 0;
> > > > + case 4:
> > > > + return 1;
> > > > case 8:
> > > > return 2;
> > > > default:
> > > > --
> > > > 2.9.3
> > >
> > > This patch has already been rejected by Maxime in the threads
> > > http://www.spinics.net/lists/dmaengine/msg08610.html
> > > and
> > > http://www.spinics.net/lists/dmaengine/msg08719.html
> > >
> > > I hope you will find the way he wants for this maxburst to be added.
> >
> > I was talking about something along these lines (not tested):
>
> I wonder why you don't submit this yourself.
I thought you were the one who cared. You asked for what I had in
mind, here it is.
> > -------8<---------
> > diff --git a/drivers/dma/sun6i-dma.c b/drivers/dma/sun6i-dma.c
> > index 83461994e418..573ac4608293 100644
> > --- a/drivers/dma/sun6i-dma.c
> > +++ b/drivers/dma/sun6i-dma.c
> > @@ -240,6 +240,8 @@ static inline s8 convert_burst(u32 maxburst)
> > switch (maxburst) {
> > case 1:
> > return 0;
> > + case 4:
> > + return 1;
> > case 8:
> > return 2;
> > default:
> > @@ -1110,11 +1112,19 @@ static int sun6i_dma_probe(struct platform_device *pdev)
> > sdc->slave.dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
> > BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
> > BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
> > + sdc->slave.dst_bursts = BIT(1) | BIT(8);
> > + sdc->slave.src_bursts = BIT(1) | BIT(8);
> > sdc->slave.directions = BIT(DMA_DEV_TO_MEM) |
> > BIT(DMA_MEM_TO_DEV);
> > sdc->slave.residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
> > sdc->slave.dev = &pdev->dev;
> >
> > + if (of_device_is_compatible(pdev->dev.of_node,
> > + "allwinner,sun8i-h3-dma")) {
> > + sdc->slave.dst_bursts |= BIT(4);
> > + sdc->slave.src_bursts |= BIT(4);
> > + }
> > +
> > sdc->pchans = devm_kcalloc(&pdev->dev, sdc->cfg->nr_max_channels,
> > sizeof(struct sun6i_pchan), GFP_KERNEL);
> > if (!sdc->pchans)
> > diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
> > index cc535a478bae..f7bbec24bb58 100644
> > --- a/include/linux/dmaengine.h
> > +++ b/include/linux/dmaengine.h
> > @@ -673,6 +673,8 @@ struct dma_filter {
> > * each type of direction, the dma controller should fill (1 <<
> > * <TYPE>) and same should be checked by controller as well
> > * @max_burst: max burst capability per-transfer
> > + * @dst_bursts: bitfield of the available burst sizes for the destination
> > + * @src_bursts: bitfield of the available burst sizes for the source
>
> You did not define dst_bursts nor src_bursts.
>
> > * @residue_granularity: granularity of the transfer residue reported
> > * by tx_status
> > * @device_alloc_chan_resources: allocate resources and return the
> > @@ -800,6 +802,14 @@ struct dma_device {
> > static inline int dmaengine_slave_config(struct dma_chan *chan,
> > struct dma_slave_config *config)
> > {
> > + if (config->src_maxburst && config->device->src_bursts &&
> > + !(BIT(config->src_maxburst) & config->device->src_bursts))
>
> The maxburst may be as big as 4Kibytes, then, I am not sure that this
> code will work!
>
> > + return -EINVAL;
> > +
> > + if (config->dst_maxburst && config->device->dst_bursts &&
> > + !(BIT(config->dst_maxburst) & config->device->dst_bursts))
> > + return -EINVAL;
> > +
> > if (chan->device->device_config)
> > return chan->device->device_config(chan, config);
> > -------8<------------
>
> Yes, I know that the burst size is always a power of 2.
> The best way to check it would be to change the {src,dts}_maxburst to a
> bitmap of the possible bursts as 0x0d for 1,4 and 8 bytes. But this
> asks for a lot of changes...
To be honest, I'm not really a big fan of those tree wide changes
without any way to maintain compatibility. It ends up in a single,
huge patch if we want to maintain bisectability that just isn't
reviewable.
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
Download attachment "signature.asc" of type "application/pgp-signature" (802 bytes)
Powered by blists - more mailing lists