| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <DB6PR0401MB25362658D117DF4D7B92FD48F8AA0@DB6PR0401MB2536.eurprd04.prod.outlook.com>
Date: Thu, 27 Oct 2016 04:34:06 +0000
From: "Y.B. Lu" <yangbo.lu@....com>
To: Scott Wood <oss@...error.net>,
"linux-mmc@...r.kernel.org" <linux-mmc@...r.kernel.org>,
"ulf.hansson@...aro.org" <ulf.hansson@...aro.org>,
Arnd Bergmann <arnd@...db.de>
CC: "linuxppc-dev@...ts.ozlabs.org" <linuxppc-dev@...ts.ozlabs.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-clk@...r.kernel.org" <linux-clk@...r.kernel.org>,
"linux-i2c@...r.kernel.org" <linux-i2c@...r.kernel.org>,
"iommu@...ts.linux-foundation.org" <iommu@...ts.linux-foundation.org>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
Mark Rutland <mark.rutland@....com>,
Rob Herring <robh+dt@...nel.org>,
Russell King <linux@....linux.org.uk>,
Jochen Friedrich <jochen@...am.de>,
Joerg Roedel <joro@...tes.org>,
Claudiu Manoil <claudiu.manoil@...escale.com>,
Bhupesh Sharma <bhupesh.sharma@...escale.com>,
Qiang Zhao <qiang.zhao@....com>,
Kumar Gala <galak@...eaurora.org>,
Santosh Shilimkar <ssantosh@...nel.org>,
Leo Li <leoyang.li@....com>, "X.B. Xie" <xiaobo.xie@....com>,
"M.H. Lian" <minghuan.lian@....com>
Subject: RE: [v12, 5/8] soc: fsl: add GUTS driver for QorIQ platforms
Hi Scott,
> -----Original Message-----
> From: Scott Wood [mailto:oss@...error.net]
> Sent: Thursday, October 27, 2016 1:06 AM
> To: Y.B. Lu; linux-mmc@...r.kernel.org; ulf.hansson@...aro.org; Arnd
> Bergmann
> Cc: linuxppc-dev@...ts.ozlabs.org; devicetree@...r.kernel.org; linux-arm-
> kernel@...ts.infradead.org; linux-kernel@...r.kernel.org; linux-
> clk@...r.kernel.org; linux-i2c@...r.kernel.org; iommu@...ts.linux-
> foundation.org; netdev@...r.kernel.org; Mark Rutland; Rob Herring;
> Russell King; Jochen Friedrich; Joerg Roedel; Claudiu Manoil; Bhupesh
> Sharma; Qiang Zhao; Kumar Gala; Santosh Shilimkar; Leo Li; X.B. Xie; M.H.
> Lian
> Subject: Re: [v12, 5/8] soc: fsl: add GUTS driver for QorIQ platforms
>
> On Wed, 2016-09-21 at 14:57 +0800, Yangbo Lu wrote:
> > diff --git a/drivers/soc/fsl/Kconfig b/drivers/soc/fsl/Kconfig new
> > file mode 100644 index 0000000..b99764c
> > --- /dev/null
> > +++ b/drivers/soc/fsl/Kconfig
> > @@ -0,0 +1,19 @@
> > +#
> > +# Freescale SOC drivers
> > +#
> > +
> > +source "drivers/soc/fsl/qe/Kconfig"
> > +
> > +config FSL_GUTS
> > + bool "Freescale QorIQ GUTS driver"
> > + select SOC_BUS
> > + help
> > + The global utilities block controls power management, I/O device
> > + enabling, power-onreset(POR) configuration monitoring, alternate
> > + function selection for multiplexed signals,and clock control.
> > + This driver is to manage and access global utilities block.
> > + Initially only reading SVR and registering soc device are
> > supported.
> > + Other guts accesses, such as reading RCW, should eventually be
> > moved
> > + into this driver as well.
> > +
> > + If you want GUTS driver support, you should say Y here.
>
> This is user-enablable without dependencies, which means it will break
> some randconfigs. If this is to be enabled via select then remove the
> text after "bool".
[Lu Yangbo-B47093] Will enable it via select and remove text after 'bool'.
>
> > +/* SoC die attribute definition for QorIQ platform */ static const
> > +struct fsl_soc_die_attr fsl_soc_die[] = { #ifdef CONFIG_PPC
> > + /*
> > + * Power Architecture-based SoCs T Series
> > + */
> > +
> > + /* Die: T4240, SoC: T4240/T4160/T4080 */
> > + { .die = "T4240",
> > + .svr = 0x82400000,
> > + .mask = 0xfff00000,
> > + },
> > + /* Die: T1040, SoC: T1040/T1020/T1042/T1022 */
> > + { .die = "T1040",
> > + .svr = 0x85200000,
> > + .mask = 0xfff00000,
> > + },
> > + /* Die: T2080, SoC: T2080/T2081 */
> > + { .die = "T2080",
> > + .svr = 0x85300000,
> > + .mask = 0xfff00000,
> > + },
> > + /* Die: T1024, SoC: T1024/T1014/T1023/T1013 */
> > + { .die = "T1024",
> > + .svr = 0x85400000,
> > + .mask = 0xfff00000,
> > + },
> > +#endif /* CONFIG_PPC */
> > +#if defined(CONFIG_ARCH_MXC) || defined(CONFIG_ARCH_LAYERSCAPE)
>
> Will this driver ever be probed on MXC? Why do we need these ifdefs at
> all?
[Lu Yangbo-B47093] Will remove them. In the previous version, we use too many members for soc definition, so I add #ifdef for ARCH.
CONFIG_ARCH_MXC was for ls1021a.
>
>
> > + /*
> > + * ARM-based SoCs LS Series
> > + */
> > +
> > + /* Die: LS1043A, SoC: LS1043A/LS1023A */
> > + { .die = "LS1043A",
> > + .svr = 0x87920000,
> > + .mask = 0xffff0000,
> > + },
> > + /* Die: LS2080A, SoC: LS2080A/LS2040A/LS2085A */
> > + { .die = "LS2080A",
> > + .svr = 0x87010000,
> > + .mask = 0xff3f0000,
> > + },
> > + /* Die: LS1088A, SoC: LS1088A/LS1048A/LS1084A/LS1044A */
> > + { .die = "LS1088A",
> > + .svr = 0x87030000,
> > + .mask = 0xff3f0000,
> > + },
> > + /* Die: LS1012A, SoC: LS1012A */
> > + { .die = "LS1012A",
> > + .svr = 0x87040000,
> > + .mask = 0xffff0000,
> > + },
> > + /* Die: LS1046A, SoC: LS1046A/LS1026A */
> > + { .die = "LS1046A",
> > + .svr = 0x87070000,
> > + .mask = 0xffff0000,
> > + },
> > + /* Die: LS2088A, SoC: LS2088A/LS2048A/LS2084A/LS2044A */
> > + { .die = "LS2088A",
> > + .svr = 0x87090000,
> > + .mask = 0xff3f0000,
> > + },
> > + /* Die: LS1021A, SoC: LS1021A/LS1020A/LS1022A
> > + * Note: Put this die at the end in cause of incorrect
> > identification
> > + */
> > + { .die = "LS1021A",
> > + .svr = 0x87000000,
> > + .mask = 0xfff00000,
> > + },
> > +#endif /* CONFIG_ARCH_MXC || CONFIG_ARCH_LAYERSCAPE */
>
> Instead of relying on ordering, add more bits to the mask so that there's
> no overlap. I think 0xfff70000 would work.
[Lu Yangbo-B47093] Ok, Will do that. Then we add 3 bits of 'Various Personalities' field for ls1021a die identification.
>
> > +out:
> > + kfree(soc_dev_attr.machine);
> > + kfree(soc_dev_attr.family);
> > + kfree(soc_dev_attr.soc_id);
> > + kfree(soc_dev_attr.revision);
> > + iounmap(guts->regs);
> > +out_free:
> > + kfree(guts);
> > + return ret;
> > +}
>
> Please use devm.
[Lu Yangbo-B47093] Sorry for forgetting this. Will do that and send out the new version soon.
Thanks for your comments.
>
> -Scott
Powered by blists - more mailing lists