[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20161029110611.28951-1-wens@csie.org>
Date: Sat, 29 Oct 2016 19:06:09 +0800
From: Chen-Yu Tsai <wens@...e.org>
To: Maxime Ripard <maxime.ripard@...e-electrons.com>,
David Airlie <airlied@...ux.ie>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>
Cc: Chen-Yu Tsai <wens@...e.org>, dri-devel@...ts.freedesktop.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org, linux-sunxi@...glegroups.com
Subject: [PATCH v3 0/2] ARM: dts: sun6i: hummingbird-a31: Enable display output through VGA bridge
Hi,
This is v3 of my sun6i DRM/KMS display enablement series. Most of the
patches in v2 were merged, leaving only the dumb-vga-dac patch and the
hummingbird-a31 VGA output patch.
A few things were changed, mainly the DAC enable method from a GPIO
to a regulator supply.
Changes since v2:
- Changed the enable-gpio of dumb-vga-dac to vdd-supply regulator.
This better matches the hardware that I have: the DAC has a fixed
regulator dropping the voltage from the board-wide 5V to 3.3V the
DAC uses. The regulator is controlled through a GPIO pin.
- Renamed the node of the VGA connector from "vga" to "vga-connector".
- Renamed the node of the VGA DAC from "bridge" to "vga-dac".
Regards
ChenYu
Chen-Yu Tsai (2):
drm/bridge: dumb-vga-dac: Support a VDD regulator supply
ARM: dts: sun6i: hummingbird-a31: Enable display output through VGA
bridge
.../bindings/display/bridge/dumb-vga-dac.txt | 2 +
arch/arm/boot/dts/sun6i-a31-hummingbird.dts | 76 ++++++++++++++++++++++
drivers/gpu/drm/bridge/dumb-vga-dac.c | 35 ++++++++++
3 files changed, 113 insertions(+)
--
2.9.3
Powered by blists - more mailing lists