| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1477769988-19945-1-git-send-email-robert.jarzmik@free.fr>
Date: Sat, 29 Oct 2016 21:39:48 +0200
From: Robert Jarzmik <robert.jarzmik@...e.fr>
To: Daniel Mack <daniel@...que.org>,
Haojian Zhuang <haojian.zhuang@...il.com>,
Robert Jarzmik <robert.jarzmik@...e.fr>
Cc: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: [PATCH v2] ARM: pxa: em-x270: use the new pxa_camera platform_data
pxa_camera has transitioned from a soc_camera driver to a standalone
v4l2 driver. Amend the device declaration accordingly.
Signed-off-by: Robert Jarzmik <robert.jarzmik@...e.fr>
---
Since v1: add regulator platform_device and missing include
---
arch/arm/mach-pxa/em-x270.c | 89 +++++++++++++++------------------------------
1 file changed, 29 insertions(+), 60 deletions(-)
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 03354c21e1f2..811a7317f3ea 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -23,6 +23,7 @@
#include <linux/gpio.h>
#include <linux/mfd/da903x.h>
#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
#include <linux/spi/spi.h>
#include <linux/spi/tdo24m.h>
#include <linux/spi/libertas_spi.h>
@@ -34,8 +35,6 @@
#include <linux/i2c/pxa-i2c.h>
#include <linux/regulator/userspace-consumer.h>
-#include <media/soc_camera.h>
-
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -958,8 +957,6 @@ static inline void em_x270_init_gpio_keys(void) {}
/* Quick Capture Interface and sensor setup */
#if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
-static struct regulator *em_x270_camera_ldo;
-
static int em_x270_sensor_init(void)
{
int ret;
@@ -969,81 +966,53 @@ static int em_x270_sensor_init(void)
return ret;
gpio_direction_output(cam_reset, 0);
-
- em_x270_camera_ldo = regulator_get(NULL, "vcc cam");
- if (em_x270_camera_ldo == NULL) {
- gpio_free(cam_reset);
- return -ENODEV;
- }
-
- ret = regulator_enable(em_x270_camera_ldo);
- if (ret) {
- regulator_put(em_x270_camera_ldo);
- gpio_free(cam_reset);
- return ret;
- }
-
gpio_set_value(cam_reset, 1);
return 0;
}
-struct pxacamera_platform_data em_x270_camera_platform_data = {
- .flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
- PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
- .mclk_10khz = 2600,
+static struct regulator_consumer_supply camera_dummy_supplies[] = {
+ REGULATOR_SUPPLY("vdd", "0-005d"),
};
-static int em_x270_sensor_power(struct device *dev, int on)
-{
- int ret;
- int is_on = regulator_is_enabled(em_x270_camera_ldo);
-
- if (on == is_on)
- return 0;
-
- gpio_set_value(cam_reset, !on);
-
- if (on)
- ret = regulator_enable(em_x270_camera_ldo);
- else
- ret = regulator_disable(em_x270_camera_ldo);
-
- if (ret)
- return ret;
-
- gpio_set_value(cam_reset, on);
-
- return 0;
-}
-
-static struct i2c_board_info em_x270_i2c_cam_info[] = {
- {
- I2C_BOARD_INFO("mt9m111", 0x48),
+static struct regulator_init_data camera_dummy_initdata = {
+ .consumer_supplies = camera_dummy_supplies,
+ .num_consumer_supplies = ARRAY_SIZE(camera_dummy_supplies),
+ .constraints = {
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
};
-static struct soc_camera_link iclink = {
- .bus_id = 0,
- .power = em_x270_sensor_power,
- .board_info = &em_x270_i2c_cam_info[0],
- .i2c_adapter_id = 0,
+static struct fixed_voltage_config camera_dummy_config = {
+ .supply_name = "camera_vdd",
+ .input_supply = "vcc cam",
+ .microvolts = 2800000,
+ .gpio = -1,
+ .enable_high = 0,
+ .init_data = &camera_dummy_initdata,
};
-static struct platform_device em_x270_camera = {
- .name = "soc-camera-pdrv",
- .id = -1,
+static struct platform_device camera_supply_dummy_device = {
+ .name = "reg-fixed-voltage",
+ .id = 1,
.dev = {
- .platform_data = &iclink,
+ .platform_data = &camera_dummy_config,
},
};
+struct pxacamera_platform_data em_x270_camera_platform_data = {
+ .flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
+ PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
+ .mclk_10khz = 2600,
+ .sensor_i2c_adapter_id = 0,
+ .sensor_i2c_address = 0x5d,
+};
+
static void __init em_x270_init_camera(void)
{
- if (em_x270_sensor_init() == 0) {
+ if (em_x270_sensor_init() == 0)
pxa_set_camera_info(&em_x270_camera_platform_data);
- platform_device_register(&em_x270_camera);
- }
+ platform_device_register(&camera_supply_dummy_device);
}
#else
static inline void em_x270_init_camera(void) {}
--
2.1.4
Powered by blists - more mailing lists