| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20161031055904.av45k535c26gjonz@pengutronix.de>
Date: Mon, 31 Oct 2016 06:59:04 +0100
From: Sascha Hauer <s.hauer@...gutronix.de>
To: Boris Brezillon <boris.brezillon@...e-electrons.com>
Cc: Lukasz Majewski <l.majewski@...ess.pl>, linux-pwm@...r.kernel.org,
Bhuvanchandra DV <bhuvanchandra.dv@...adex.com>,
linux-kernel@...r.kernel.org, Stefan Agner <stefan@...er.ch>,
Thierry Reding <thierry.reding@...il.com>,
kernel@...gutronix.de, Fabio Estevam <fabio.estevam@....com>,
Fabio Estevam <festevam@...il.com>,
Lothar Wassmann <LW@...o-electronics.de>,
Philipp Zabel <pza@...gutronix.de>
Subject: Re: [PATCH v2 03/10] pwm: imx: Rewrite imx_pwm_*_v1 code to
facilitate switch to atomic pwm operation
On Thu, Oct 27, 2016 at 09:40:05AM +0200, Boris Brezillon wrote:
> On Thu, 27 Oct 2016 08:29:39 +0200
> Lukasz Majewski <l.majewski@...ess.pl> wrote:
>
> > The code has been rewritten to remove "generic" calls to
> > imx_pwm_{enable|disable|config}.
> >
> > Such approach would facilitate switch to atomic PWM (a.k.a ->apply())
> > implementation.
> >
> > Suggested-by: Stefan Agner <stefan@...er.ch>
> > Suggested-by: Boris Brezillon <boris.brezillon@...e-electrons.com>
> > Signed-off-by: Lukasz Majewski <l.majewski@...ess.pl>
> > ---
> > Changes for v2:
> > - Add missing clock unprepare for clk_ipg
> > - Enable peripheral PWM clock (clk_per)
> > ---
> > drivers/pwm/pwm-imx.c | 50 ++++++++++++++++++++++++++++++++++++++------------
> > 1 file changed, 38 insertions(+), 12 deletions(-)
> >
> > diff --git a/drivers/pwm/pwm-imx.c b/drivers/pwm/pwm-imx.c
> > index ea3ce79..822eb5a 100644
> > --- a/drivers/pwm/pwm-imx.c
> > +++ b/drivers/pwm/pwm-imx.c
> > @@ -65,8 +65,6 @@ struct imx_chip {
> > static int imx_pwm_config_v1(struct pwm_chip *chip,
> > struct pwm_device *pwm, int duty_ns, int period_ns)
> > {
> > - struct imx_chip *imx = to_imx_chip(chip);
> > -
> > /*
> > * The PWM subsystem allows for exact frequencies. However,
> > * I cannot connect a scope on my device to the PWM line and
> > @@ -84,26 +82,56 @@ static int imx_pwm_config_v1(struct pwm_chip *chip,
> > * both the prescaler (/1 .. /128) and then by CLKSEL
> > * (/2 .. /16).
> > */
> > + struct imx_chip *imx = to_imx_chip(chip);
> > u32 max = readl(imx->mmio_base + MX1_PWMP);
> > u32 p = max * duty_ns / period_ns;
> > + int ret;
> > +
> > + ret = clk_prepare_enable(imx->clk_ipg);
> > + if (ret)
> > + return ret;
> > +
> > writel(max - p, imx->mmio_base + MX1_PWMS);
> >
> > + clk_disable_unprepare(imx->clk_ipg);
> > +
> > return 0;
> > }
> >
> > -static void imx_pwm_set_enable_v1(struct pwm_chip *chip, bool enable)
> > +static int imx_pwm_enable_v1(struct pwm_chip *chip, struct pwm_device *pwm)
> > {
> > struct imx_chip *imx = to_imx_chip(chip);
> > + int ret;
> > u32 val;
> >
> > + ret = clk_prepare_enable(imx->clk_ipg);
> > + if (ret)
> > + return ret;
> > +
> > + ret = clk_prepare_enable(imx->clk_per);
> > + if (ret)
> > + return ret;
> > +
> > val = readl(imx->mmio_base + MX1_PWMC);
> > + val |= MX1_PWMC_EN;
> > + writel(val, imx->mmio_base + MX1_PWMC);
> >
> > - if (enable)
> > - val |= MX1_PWMC_EN;
> > - else
> > - val &= ~MX1_PWMC_EN;
> > + clk_disable_unprepare(imx->clk_ipg);
> > +
> > + return 0;
> > +}
> > +
> > +static void imx_pwm_disable_v1(struct pwm_chip *chip, struct pwm_device *pwm)
> > +{
> > + struct imx_chip *imx = to_imx_chip(chip);
> > + u32 val;
> > +
> > + val = readl(imx->mmio_base + MX1_PWMC);
> > + val &= ~MX1_PWMC_EN;
> >
> > writel(val, imx->mmio_base + MX1_PWMC);
>
> Are you sure you don't need to enable the ipg clk when manipulating the
> PWMC register?
> If it's not needed here, then it's probably not needed in
> imx_pwm_enable_v1() either.
As said, even the commit 7b27c160c68 introducing the register clk did not
enable the clock consistently for all register accesses. Maybe it's best
to include the following patch so that we can find a clear culprit and
do not bury the ipg clock changes in larger patches.
Sascha
-----------------------------8<-----------------------------------
>From 30b77e83269a58c2cb5ce6de8be647e027030d34 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@...gutronix.de>
Date: Mon, 31 Oct 2016 06:45:33 +0100
Subject: [PATCH] pwm: imx: remove ipg clock
The use of the ipg clock was introduced with commit 7b27c160c6. In the
commit message it was claimed that the ipg clock is enabled for register
accesses. This is true for the ->config() callback, but not for the
->set_enable() callback. Given that the ipg clock is not consistently
enabled for all register accesses we can assume that either it is not
required at all or that the current code does not work.
Remove the ipg clock code for now so that it's no longer in the way of
refactoring the driver.
Signed-off-by: Sascha Hauer <s.hauer@...gutronix.de>
Cc: Philipp Zabel <p.zabel@...gutronix.de>
---
drivers/pwm/pwm-imx.c | 19 +------------------
1 file changed, 1 insertion(+), 18 deletions(-)
diff --git a/drivers/pwm/pwm-imx.c b/drivers/pwm/pwm-imx.c
index d600fd5..70609ef2 100644
--- a/drivers/pwm/pwm-imx.c
+++ b/drivers/pwm/pwm-imx.c
@@ -49,7 +49,6 @@
struct imx_chip {
struct clk *clk_per;
- struct clk *clk_ipg;
void __iomem *mmio_base;
@@ -204,17 +203,8 @@ static int imx_pwm_config(struct pwm_chip *chip,
struct pwm_device *pwm, int duty_ns, int period_ns)
{
struct imx_chip *imx = to_imx_chip(chip);
- int ret;
-
- ret = clk_prepare_enable(imx->clk_ipg);
- if (ret)
- return ret;
- ret = imx->config(chip, pwm, duty_ns, period_ns);
-
- clk_disable_unprepare(imx->clk_ipg);
-
- return ret;
+ return imx->config(chip, pwm, duty_ns, period_ns);
}
static int imx_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
@@ -293,13 +283,6 @@ static int imx_pwm_probe(struct platform_device *pdev)
return PTR_ERR(imx->clk_per);
}
- imx->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
- if (IS_ERR(imx->clk_ipg)) {
- dev_err(&pdev->dev, "getting ipg clock failed with %ld\n",
- PTR_ERR(imx->clk_ipg));
- return PTR_ERR(imx->clk_ipg);
- }
-
imx->chip.ops = &imx_pwm_ops;
imx->chip.dev = &pdev->dev;
imx->chip.base = -1;
--
2.9.3
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
Powered by blists - more mailing lists