| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1477925138-23457-3-git-send-email-bgolaszewski@baylibre.com>
Date: Mon, 31 Oct 2016 15:45:35 +0100
From: Bartosz Golaszewski <bgolaszewski@...libre.com>
To: Kevin Hilman <khilman@...libre.com>,
Michael Turquette <mturquette@...libre.com>,
Sekhar Nori <nsekhar@...com>, Rob Herring <robh+dt@...nel.org>,
Frank Rowand <frowand.list@...il.com>,
Mark Rutland <mark.rutland@....com>,
Peter Ujfalusi <peter.ujfalusi@...com>,
Russell King <linux@...linux.org.uk>
Cc: LKML <linux-kernel@...r.kernel.org>,
arm-soc <linux-arm-kernel@...ts.infradead.org>,
linux-drm <dri-devel@...ts.freedesktop.org>,
linux-devicetree <devicetree@...r.kernel.org>,
Jyri Sarha <jsarha@...com>,
Tomi Valkeinen <tomi.valkeinen@...com>,
David Airlie <airlied@...ux.ie>,
Laurent Pinchart <laurent.pinchart@...asonboard.com>,
Bartosz Golaszewski <bgolaszewski@...libre.com>
Subject: [PATCH v2 2/5] ARM: bus: da8xx-mstpri: new driver
Create the driver for the da8xx master peripheral priority
configuration and implement support for writing to the three
Master Priority registers on da850 SoCs.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@...libre.com>
---
.../devicetree/bindings/bus/ti,da850-mstpri.txt | 20 ++
drivers/bus/Kconfig | 9 +
drivers/bus/Makefile | 2 +
drivers/bus/da8xx-mstpri.c | 269 +++++++++++++++++++++
4 files changed, 300 insertions(+)
create mode 100644 Documentation/devicetree/bindings/bus/ti,da850-mstpri.txt
create mode 100644 drivers/bus/da8xx-mstpri.c
diff --git a/Documentation/devicetree/bindings/bus/ti,da850-mstpri.txt b/Documentation/devicetree/bindings/bus/ti,da850-mstpri.txt
new file mode 100644
index 0000000..72daefc
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/ti,da850-mstpri.txt
@@ -0,0 +1,20 @@
+* Device tree bindings for Texas Instruments da8xx master peripheral
+ priority driver
+
+DA8XX SoCs feature a set of registers allowing to change the priority of all
+peripherals classified as masters.
+
+Documentation:
+OMAP-L138 (DA850) - http://www.ti.com/lit/ug/spruh82c/spruh82c.pdf
+
+Required properties:
+
+- compatible: "ti,da850-mstpri" - for da850 based boards
+- reg: offset and length of the mstpri registers
+
+Example for da850-lcdk is shown below.
+
+mstpri {
+ compatible = "ti,da850-mstpri";
+ reg = <0x14110 0x0c>;
+};
diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
index 7875105..f5db3a7 100644
--- a/drivers/bus/Kconfig
+++ b/drivers/bus/Kconfig
@@ -167,4 +167,13 @@ config VEXPRESS_CONFIG
help
Platform configuration infrastructure for the ARM Ltd.
Versatile Express.
+
+config DA8XX_MSTPRI
+ bool "TI da8xx master peripheral priority driver"
+ depends on ARCH_DAVINCI_DA8XX
+ help
+ Driver for Texas Instruments da8xx master peripheral priority
+ configuration. Allows to adjust the priorities of all master
+ peripherals.
+
endmenu
diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile
index c6cfa6b..2adb540 100644
--- a/drivers/bus/Makefile
+++ b/drivers/bus/Makefile
@@ -21,3 +21,5 @@ obj-$(CONFIG_SIMPLE_PM_BUS) += simple-pm-bus.o
obj-$(CONFIG_TEGRA_ACONNECT) += tegra-aconnect.o
obj-$(CONFIG_UNIPHIER_SYSTEM_BUS) += uniphier-system-bus.o
obj-$(CONFIG_VEXPRESS_CONFIG) += vexpress-config.o
+
+obj-$(CONFIG_DA8XX_MSTPRI) += da8xx-mstpri.o
diff --git a/drivers/bus/da8xx-mstpri.c b/drivers/bus/da8xx-mstpri.c
new file mode 100644
index 0000000..85f0b53
--- /dev/null
+++ b/drivers/bus/da8xx-mstpri.c
@@ -0,0 +1,269 @@
+/*
+ * TI da8xx master peripheral priority driver
+ *
+ * Copyright (C) 2016 BayLibre SAS
+ *
+ * Author:
+ * Bartosz Golaszewski <bgolaszewski@...libre.com.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/regmap.h>
+#include <linux/of_fdt.h>
+
+/*
+ * REVISIT: Linux doesn't have a good framework for the kind of performance
+ * knobs this driver controls. We can't use device tree properties as it deals
+ * with hardware configuration rather than description. We also don't want to
+ * commit to maintaining some random sysfs attributes.
+ *
+ * For now we just hardcode the register values for the boards that need
+ * some changes (as is the case for the LCD controller on da850-lcdk - the
+ * first board we support here). When linux gets an appropriate framework,
+ * we'll easily convert the driver to it.
+ */
+
+#define DA8XX_MSTPRI0_OFFSET 0
+#define DA8XX_MSTPRI1_OFFSET 4
+#define DA8XX_MSTPRI2_OFFSET 8
+
+enum {
+ DA8XX_MSTPRI_ARM_I = 0,
+ DA8XX_MSTPRI_ARM_D,
+ DA8XX_MSTPRI_UPP,
+ DA8XX_MSTPRI_SATA,
+ DA8XX_MSTPRI_PRU0,
+ DA8XX_MSTPRI_PRU1,
+ DA8XX_MSTPRI_EDMA30TC0,
+ DA8XX_MSTPRI_EDMA30TC1,
+ DA8XX_MSTPRI_EDMA31TC0,
+ DA8XX_MSTPRI_VPIF_DMA_0,
+ DA8XX_MSTPRI_VPIF_DMA_1,
+ DA8XX_MSTPRI_EMAC,
+ DA8XX_MSTPRI_USB0CFG,
+ DA8XX_MSTPRI_USB0CDMA,
+ DA8XX_MSTPRI_UHPI,
+ DA8XX_MSTPRI_USB1,
+ DA8XX_MSTPRI_LCDC,
+};
+
+struct da8xx_mstpri_descr {
+ int reg;
+ int shift;
+ int mask;
+};
+
+static const struct da8xx_mstpri_descr da8xx_mstpri_priority_list[] = {
+ [DA8XX_MSTPRI_ARM_I] = {
+ .reg = DA8XX_MSTPRI0_OFFSET,
+ .shift = 0,
+ .mask = 0x0000000f,
+ },
+ [DA8XX_MSTPRI_ARM_D] = {
+ .reg = DA8XX_MSTPRI0_OFFSET,
+ .shift = 4,
+ .mask = 0x000000f0,
+ },
+ [DA8XX_MSTPRI_UPP] = {
+ .reg = DA8XX_MSTPRI0_OFFSET,
+ .shift = 16,
+ .mask = 0x000f0000,
+ },
+ [DA8XX_MSTPRI_SATA] = {
+ .reg = DA8XX_MSTPRI0_OFFSET,
+ .shift = 20,
+ .mask = 0x00f00000,
+ },
+ [DA8XX_MSTPRI_PRU0] = {
+ .reg = DA8XX_MSTPRI1_OFFSET,
+ .shift = 0,
+ .mask = 0x0000000f,
+ },
+ [DA8XX_MSTPRI_PRU1] = {
+ .reg = DA8XX_MSTPRI1_OFFSET,
+ .shift = 4,
+ .mask = 0x000000f0,
+ },
+ [DA8XX_MSTPRI_EDMA30TC0] = {
+ .reg = DA8XX_MSTPRI1_OFFSET,
+ .shift = 8,
+ .mask = 0x00000f00,
+ },
+ [DA8XX_MSTPRI_EDMA30TC1] = {
+ .reg = DA8XX_MSTPRI1_OFFSET,
+ .shift = 12,
+ .mask = 0x0000f000,
+ },
+ [DA8XX_MSTPRI_EDMA31TC0] = {
+ .reg = DA8XX_MSTPRI1_OFFSET,
+ .shift = 16,
+ .mask = 0x000f0000,
+ },
+ [DA8XX_MSTPRI_VPIF_DMA_0] = {
+ .reg = DA8XX_MSTPRI1_OFFSET,
+ .shift = 24,
+ .mask = 0x0f000000,
+ },
+ [DA8XX_MSTPRI_VPIF_DMA_1] = {
+ .reg = DA8XX_MSTPRI1_OFFSET,
+ .shift = 28,
+ .mask = 0xf0000000,
+ },
+ [DA8XX_MSTPRI_EMAC] = {
+ .reg = DA8XX_MSTPRI2_OFFSET,
+ .shift = 0,
+ .mask = 0x0000000f,
+ },
+ [DA8XX_MSTPRI_USB0CFG] = {
+ .reg = DA8XX_MSTPRI2_OFFSET,
+ .shift = 8,
+ .mask = 0x00000f00,
+ },
+ [DA8XX_MSTPRI_USB0CDMA] = {
+ .reg = DA8XX_MSTPRI2_OFFSET,
+ .shift = 12,
+ .mask = 0x0000f000,
+ },
+ [DA8XX_MSTPRI_UHPI] = {
+ .reg = DA8XX_MSTPRI2_OFFSET,
+ .shift = 20,
+ .mask = 0x00f00000,
+ },
+ [DA8XX_MSTPRI_USB1] = {
+ .reg = DA8XX_MSTPRI2_OFFSET,
+ .shift = 24,
+ .mask = 0x0f000000,
+ },
+ [DA8XX_MSTPRI_LCDC] = {
+ .reg = DA8XX_MSTPRI2_OFFSET,
+ .shift = 28,
+ .mask = 0xf0000000,
+ },
+};
+
+struct da8xx_mstpri_priority {
+ int which;
+ u32 val;
+};
+
+struct da8xx_mstpri_board_priorities {
+ const char *board;
+ const struct da8xx_mstpri_priority *priorities;
+ size_t numprio;
+};
+
+/*
+ * Default memory settings of da850 do not meet the throughput/latency
+ * requirements of tilcdc. This results in the image displayed being
+ * incorrect and the following warning being displayed by the LCDC
+ * drm driver:
+ *
+ * tilcdc da8xx_lcdc.0: tilcdc_crtc_irq(0x00000020): FIFO underfow
+ */
+static const struct da8xx_mstpri_priority da850_lcdk_priorities[] = {
+ {
+ .which = DA8XX_MSTPRI_LCDC,
+ .val = 0,
+ },
+ {
+ .which = DA8XX_MSTPRI_EDMA30TC1,
+ .val = 0,
+ },
+ {
+ .which = DA8XX_MSTPRI_EDMA30TC0,
+ .val = 1,
+ },
+};
+
+static const struct da8xx_mstpri_board_priorities da8xx_mstpri_board_confs[] = {
+ {
+ .board = "ti,da850-lcdk",
+ .priorities = da850_lcdk_priorities,
+ .numprio = ARRAY_SIZE(da850_lcdk_priorities),
+ },
+};
+
+static const struct da8xx_mstpri_board_priorities *
+da8xx_mstpri_get_board_prio(void)
+{
+ const struct da8xx_mstpri_board_priorities *board_prio;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(da8xx_mstpri_board_confs); i++) {
+ board_prio = &da8xx_mstpri_board_confs[i];
+
+ if (of_machine_is_compatible(board_prio->board))
+ return board_prio;
+ }
+
+ return NULL;
+}
+
+static int da8xx_mstpri_probe(struct platform_device *pdev)
+{
+ const struct da8xx_mstpri_board_priorities *prio_list;
+ const struct da8xx_mstpri_descr *prio_descr;
+ const struct da8xx_mstpri_priority *prio;
+ struct device *dev = &pdev->dev;
+ struct resource *res;
+ void __iomem *mstpri;
+ u32 reg;
+ int i;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ mstpri = devm_ioremap_resource(dev, res);
+ if (IS_ERR(mstpri)) {
+ dev_err(dev, "unable to map MSTPRI registers\n");
+ return PTR_ERR(mstpri);
+ }
+
+ prio_list = da8xx_mstpri_get_board_prio();
+ if (!prio_list) {
+ dev_err(dev, "no master priotities defined for board '%s'\n",
+ of_flat_dt_get_machine_name());
+ return -EINVAL;
+ }
+
+ for (i = 0; i < prio_list->numprio; i++) {
+ prio = &prio_list->priorities[i];
+ prio_descr = &da8xx_mstpri_priority_list[prio->which];
+
+ if (prio_descr->reg + sizeof(u32) > resource_size(res)) {
+ dev_warn(dev, "register offset out of range\n");
+ continue;
+ }
+
+ reg = readl(mstpri + prio_descr->reg);
+ reg &= ~prio_descr->mask;
+ reg |= prio->val << prio_descr->shift;
+
+ writel(reg, mstpri + prio_descr->reg);
+ }
+
+ return 0;
+}
+
+static const struct of_device_id da8xx_mstpri_of_match[] = {
+ { .compatible = "ti,da850-mstpri", },
+ { },
+};
+
+static struct platform_driver da8xx_mstpri_driver = {
+ .probe = da8xx_mstpri_probe,
+ .driver = {
+ .name = "da8xx-mstpri",
+ .of_match_table = da8xx_mstpri_of_match,
+ },
+};
+module_platform_driver(da8xx_mstpri_driver);
+
+MODULE_AUTHOR("Bartosz Golaszewski <bgolaszewski@...libre.com>");
+MODULE_DESCRIPTION("TI da8xx master peripheral priority driver");
+MODULE_LICENSE("GPL v2");
--
2.9.3
Powered by blists - more mailing lists