linux-kernel - [PATCH] scsi: mpt3sas: fix some spelling mistakes in message and comments

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20161031153446.18846-1-colin.king@canonical.com>
Date:   Mon, 31 Oct 2016 09:34:46 -0600
From:   Colin King <colin.king@...onical.com>
To:     Sathya Prakash <sathya.prakash@...adcom.com>,
        Chaitra P B <chaitra.basappa@...adcom.com>,
        Suganath Prabu Subramani 
        <suganath-prabu.subramani@...adcom.com>,
        "James E . J . Bottomley" <jejb@...ux.vnet.ibm.com>,
        "Martin K . Petersen" <martin.petersen@...cle.com>,
        MPT-FusionLinux.pdl@...adcom.com, linux-scsi@...r.kernel.org
Cc:     linux-kernel@...r.kernel.org
Subject: [PATCH] scsi: mpt3sas: fix some spelling mistakes in message and comments

From: Colin Ian King <colin.king@...onical.com>

Trival fixes, minor spelling mistakes in comments and in a KERN_INFO
message.

Signed-off-by: Colin Ian King <colin.king@...onical.com>
---
 drivers/scsi/mpt3sas/mpt3sas_scsih.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index 981be7b..4f28963 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -423,7 +423,7 @@ _scsih_get_sas_address(struct MPT3SAS_ADAPTER *ioc, u16 handle,
 		return 0;
 	}
 
-	/* we hit this becuase the given parent handle doesn't exist */
+	/* we hit this because the given parent handle doesn't exist */
 	if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
 		return -ENXIO;
 
@@ -1523,7 +1523,7 @@ _scsih_display_sata_capabilities(struct MPT3SAS_ADAPTER *ioc,
 /*
  * raid transport support -
  * Enabled for SLES11 and newer, in older kernels the driver will panic when
- * unloading the driver followed by a load - I beleive that the subroutine
+ * unloading the driver followed by a load - I believe that the subroutine
  * raid_class_release() is not cleaning up properly.
  */
 
@@ -2948,7 +2948,7 @@ _scsih_ublock_io_device(struct MPT3SAS_ADAPTER *ioc, u64 sas_address)
  * @ioc: per adapter object
  * @handle: device handle
  *
- * During device pull we need to appropiately set the sdev state.
+ * During device pull we need to appropriately set the sdev state.
  */
 static void
 _scsih_block_io_all_device(struct MPT3SAS_ADAPTER *ioc)
@@ -2977,7 +2977,7 @@ _scsih_block_io_all_device(struct MPT3SAS_ADAPTER *ioc)
  * @ioc: per adapter object
  * @handle: device handle
  *
- * During device pull we need to appropiately set the sdev state.
+ * During device pull we need to appropriately set the sdev state.
  */
 static void
 _scsih_block_io_device(struct MPT3SAS_ADAPTER *ioc, u16 handle)
@@ -3936,7 +3936,7 @@ _scsih_flush_running_cmds(struct MPT3SAS_ADAPTER *ioc)
  * _scsih_setup_eedp - setup MPI request for EEDP transfer
  * @ioc: per adapter object
  * @scmd: pointer to scsi command object
- * @mpi_request: pointer to the SCSI_IO reqest message frame
+ * @mpi_request: pointer to the SCSI_IO request message frame
  *
  * Supporting protection 1 and 3.
  *
@@ -4088,7 +4088,7 @@ scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *scmd)
 		scmd->result = DID_NO_CONNECT << 16;
 		scmd->scsi_done(scmd);
 		return 0;
-	/* device busy with task managment */
+	/* device busy with task management */
 	} else if (sas_target_priv_data->tm_busy ||
 	    sas_device_priv_data->block)
 		return SCSI_MLQUEUE_DEVICE_BUSY;
@@ -6327,7 +6327,7 @@ _scsih_reprobe_lun(struct scsi_device *sdev, void *no_uld_attach)
 {
 	sdev->no_uld_attach = no_uld_attach ? 1 : 0;
 	sdev_printk(KERN_INFO, sdev, "%s raid component\n",
-	    sdev->no_uld_attach ? "hidding" : "exposing");
+	    sdev->no_uld_attach ? "hiding" : "exposing");
 	WARN_ON(scsi_device_reprobe(sdev));
 }
 
@@ -9217,7 +9217,7 @@ scsih_init(void)
 	 /* queuecommand callback hander */
 	scsi_io_cb_idx = mpt3sas_base_register_callback_handler(_scsih_io_done);
 
-	/* task managment callback handler */
+	/* task management callback handler */
 	tm_cb_idx = mpt3sas_base_register_callback_handler(_scsih_tm_done);
 
 	/* base internal commands callback handler */
-- 
2.9.3