lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1477932987-27871-1-git-send-email-narmstrong@baylibre.com>
Date:   Mon, 31 Oct 2016 17:56:22 +0100
From:   Neil Armstrong <narmstrong@...libre.com>
To:     f.fainelli@...il.com, khilman@...libre.com, carlo@...one.org,
        andrew@...n.ch
Cc:     Neil Armstrong <narmstrong@...libre.com>, netdev@...r.kernel.org,
        linux-amlogic@...ts.infradead.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        devicetree@...r.kernel.org
Subject: [RFC PATCH v2 0/5] ARM64: Add Internal PHY support for Meson GXL

The Amlogic Meson GXL SoCs have an internal RMII PHY that is muxed with the
external RGMII pins.

In order to support switching between the two PHYs links, extended registers
size for mdio-mux-mmioreg must be added.

Finally, the internal PHY is added in the GXL dtsi and support for each
board is added in intermediate board family dtsi or final dts.

This patchset depends on ARM64 dts patch at [1]

Changes since original RFC patchset at : [2]
 - Remove meson8b experimental phy switching
 - Switch to mdio-mux-mmioreg with extennded size support
 - Add internal phy support for S905x and p231
 - Add external PHY support for p230

[1] http://lkml.kernel.org/r/1477932286-27482-1-git-send-email-narmstrong@baylibre.com
[2] http://lkml.kernel.org/r/1477060838-14164-1-git-send-email-narmstrong@baylibre.com

Neil Armstrong (5):
  net: mdio-mux-mmioreg: Add support for 16bit and 32bit register sizes
  net: phy: Add Meson GXL Internal PHY driver
  ARM64: dts: meson-gxl: Add ethernet nodes with internal PHY
  ARM64: dts: meson-gxl-p23x: Enable ethernet
  ARM64: dts: meson-gxl-s905x: Enable internal ethernet PHY

 .../devicetree/bindings/net/mdio-mux-mmioreg.txt   |  4 +-
 .../boot/dts/amlogic/meson-gxl-s905d-p230.dts      | 16 +++++
 .../boot/dts/amlogic/meson-gxl-s905d-p231.dts      |  6 ++
 .../boot/dts/amlogic/meson-gxl-s905d-p23x.dtsi     |  4 ++
 arch/arm64/boot/dts/amlogic/meson-gxl-s905x.dtsi   |  6 ++
 arch/arm64/boot/dts/amlogic/meson-gxl.dtsi         | 45 ++++++++++++
 drivers/net/phy/Kconfig                            |  5 ++
 drivers/net/phy/Makefile                           |  1 +
 drivers/net/phy/mdio-mux-mmioreg.c                 | 60 ++++++++++++----
 drivers/net/phy/meson-gxl.c                        | 81 ++++++++++++++++++++++
 10 files changed, 213 insertions(+), 15 deletions(-)
 create mode 100644 drivers/net/phy/meson-gxl.c

-- 
1.9.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ