[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20161031203951.5444-2-paul@crapouillou.net>
Date: Mon, 31 Oct 2016 21:39:46 +0100
From: Paul Cercueil <paul@...pouillou.net>
To: rtc-linux@...glegroups.com,
Alessandro Zummo <a.zummo@...ertech.it>,
Alexandre Belloni <alexandre.belloni@...e-electrons.com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Ralf Baechle <ralf@...ux-mips.org>,
Maarten ter Huurne <maarten@...ewalker.org>,
Lars-Peter Clausen <lars@...afoo.de>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-mips@...ux-mips.org
Cc: Paul Cercueil <paul@...pouillou.net>
Subject: [PATCH v3 2/7] Documentation: dt: Add binding info for jz4740-rtc driver
This commit adds documentation for the device-tree bindings of the
jz4740-rtc driver, which supports the RTC unit present in the JZ4740 and
JZ4780 SoCs from Ingenic.
Signed-off-by: Paul Cercueil <paul@...pouillou.net>
Acked-by: Maarten ter Huurne <maarten@...ewalker.org>
---
.../devicetree/bindings/rtc/ingenic,jz4740-rtc.txt | 37 ++++++++++++++++++++++
1 file changed, 37 insertions(+)
create mode 100644 Documentation/devicetree/bindings/rtc/ingenic,jz4740-rtc.txt
v2:
- Remove 'interrupt-parent' of the list of required properties
- Add the -msec suffix for the DT entries that represent time
v3:
- Replace the -msec suffix by -ms
- Change the register area size from 0x3F to 0x40
diff --git a/Documentation/devicetree/bindings/rtc/ingenic,jz4740-rtc.txt b/Documentation/devicetree/bindings/rtc/ingenic,jz4740-rtc.txt
new file mode 100644
index 0000000..df97594
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/ingenic,jz4740-rtc.txt
@@ -0,0 +1,37 @@
+JZ4740 and similar SoCs real-time clock driver
+
+Required properties:
+
+- compatible: One of:
+ - "ingenic,jz4740-rtc" - for use with the JZ4740 SoC
+ - "ingenic,jz4780-rtc" - for use with the JZ4780 SoC
+- reg: Address range of rtc register set
+- interrupts: IRQ number for the alarm interrupt
+- clocks: phandle to the "rtc" clock
+- clock-names: must be "rtc"
+
+Optional properties:
+- system-power-controller: To use this component as the
+ system power controller
+- reset-pin-assert-time-ms: Reset pin low-level assertion
+ time after wakeup (default 60ms; range 0-125ms if RTC clock
+ at 32 kHz)
+- min-wakeup-pin-assert-time-ms: Minimum wakeup pin assertion
+ time (default 100ms; range 0-2s if RTC clock at 32 kHz)
+
+Example:
+
+rtc@...03000 {
+ compatible = "ingenic,jz4740-rtc";
+ reg = <0x10003000 0x40>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <32>;
+
+ clocks = <&rtc_clock>;
+ clock-names = "rtc";
+
+ system-power-controller;
+ reset-pin-assert-time-ms = <60>;
+ min-wakeup-pin-assert-time-ms = <100>;
+};
--
2.9.3
Powered by blists - more mailing lists