[ 0.000000] Linux version 4.9.0-rc2-00003-g414e1a5 (martin@laptop) (gcc version 4.9.2 (Debian 4.9.2-10) ) #86 SMP Mon Oct 24 09:25:27 CEST 2016 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-rc2-00003-g414e1a5 root=UUID=bc17d7c1-da00-453d-bb7c-d956af38c74d ro nosplash [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000a6abefff] usable [ 0.000000] BIOS-e820: [mem 0x00000000a6abf000-0x00000000a6ebefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000a6ebf000-0x00000000a6fbefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000a6fbf000-0x00000000a6ffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000a6fff000-0x00000000a6ffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000a7000000-0x00000000af9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffc80000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000024f5fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Acer TravelMate B113/BA10_HX , BIOS V1.09 10/30/2012 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x24f600 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-E7FFF write-protect [ 0.000000] E8000-EFFFF write-combining [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0A7000000 mask FFF000000 uncachable [ 0.000000] 3 base 0A8000000 mask FF8000000 uncachable [ 0.000000] 4 base 0B0000000 mask FF0000000 uncachable [ 0.000000] 5 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 6 base 100000000 mask F00000000 write-back [ 0.000000] 7 base 200000000 mask FC0000000 write-back [ 0.000000] 8 base 240000000 mask FF0000000 write-back [ 0.000000] 9 base 24F600000 mask FFFE00000 uncachable [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: last_pfn = 0xa7000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0] [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] reserving inaccessible SNB gfx pages [ 0.000000] BRK [0x01aad000, 0x01aadfff] PGTABLE [ 0.000000] BRK [0x01aae000, 0x01aaefff] PGTABLE [ 0.000000] BRK [0x01aaf000, 0x01aaffff] PGTABLE [ 0.000000] BRK [0x01ab0000, 0x01ab0fff] PGTABLE [ 0.000000] BRK [0x01ab1000, 0x01ab1fff] PGTABLE [ 0.000000] BRK [0x01ab2000, 0x01ab2fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x36b56000-0x375a2fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 ACRSYS) [ 0.000000] ACPI: XSDT 0x00000000A6FFE210 00008C (v01 ACRSYS ACRPRDCT 00000001 01000013) [ 0.000000] ACPI: FACP 0x00000000A6FFB000 0000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: DSDT 0x00000000A6FEC000 00B903 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000) [ 0.000000] ACPI: FACS 0x00000000A6FBB000 000040 [ 0.000000] ACPI: FACS 0x00000000A6FBB000 000040 [ 0.000000] ACPI: UEFI 0x00000000A6FFD000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: ASF! 0x00000000A6FFC000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: HPET 0x00000000A6FFA000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: APIC 0x00000000A6FF9000 00008C (v02 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: MCFG 0x00000000A6FF8000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: SLIC 0x00000000A6FEB000 000176 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: SSDT 0x00000000A6FEA000 0006FE (v01 ACRSYS ACRPRDCT 00001000 1025 00040000) [ 0.000000] ACPI: BOOT 0x00000000A6FE8000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: ASPT 0x00000000A6FE3000 000034 (v07 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: FPDT 0x00000000A6FE1000 000044 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: SSDT 0x00000000A6FE0000 00079A (v01 ACRSYS ACRPRDCT 00003000 1025 00040000) [ 0.000000] ACPI: SSDT 0x00000000A6FDF000 000A92 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000024f5fffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x24f5f5000-0x24f5f8fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000024f5fffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff] [ 0.000000] node 0: [mem 0x0000000020200000-0x000000003fffffff] [ 0.000000] node 0: [mem 0x0000000040200000-0x00000000a6abefff] [ 0.000000] node 0: [mem 0x00000000a6fff000-0x00000000a6ffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000024f5fffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000024f5fffff] [ 0.000000] On node 0 totalpages: 2055260 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 156 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 10587 pages used for memmap [ 0.000000] DMA32 zone: 677568 pages, LIFO batch:31 [ 0.000000] Normal zone: 21464 pages used for memmap [ 0.000000] Normal zone: 1373696 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics memory at 0x00000000a7a00000-0x00000000af9fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xa6abf000-0xa6ebefff] [ 0.000000] PM: Registered nosave memory: [mem 0xa6ebf000-0xa6fbefff] [ 0.000000] PM: Registered nosave memory: [mem 0xa6fbf000-0xa6ffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xa7000000-0xaf9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xafa00000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffc7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffc80000-0xffffffff] [ 0.000000] e820: [mem 0xafa00000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] percpu: Embedded 34 pages/cpu @ffff88024f200000 s100776 r8192 d30296 u262144 [ 0.000000] pcpu-alloc: s100776 r8192 d30296 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2022989 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-rc2-00003-g414e1a5 root=UUID=bc17d7c1-da00-453d-bb7c-d956af38c74d ro nosplash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 8002260K/8221040K available (5425K kernel code, 831K rwdata, 1900K rodata, 1136K init, 736K bss, 218780K reserved, 0K cma-reserved) [ 0.000000] kmemleak: Kernel memory leak detector disabled [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8 [ 0.000000] NR_IRQS:33024 nr_irqs:488 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] kmemleak: Early log buffer exceeded (1191), please increase DEBUG_KMEMLEAK_EARLY_LOG_SIZE [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1496.576 MHz processor [ 0.000039] Calibrating delay loop (skipped), value calculated using timer frequency.. 2993.15 BogoMIPS (lpj=5986304) [ 0.000169] pid_max: default: 32768 minimum: 301 [ 0.000250] ACPI: Core revision 20160831 [ 0.017085] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.017262] Security Framework initialized [ 0.017326] Yama: becoming mindful. [ 0.017396] AppArmor: AppArmor disabled by boot time parameter [ 0.018101] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.020720] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.021927] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.022008] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.022482] CPU: Physical Processor ID: 0 [ 0.022546] CPU: Processor Core ID: 0 [ 0.022612] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.022677] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.022747] mce: CPU supports 7 MCE banks [ 0.022817] CPU0: Thermal monitoring enabled (TM1) [ 0.022893] process: using mwait in idle threads [ 0.022960] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.023025] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.023711] Freeing SMP alternatives memory: 24K (ffffffff819ed000 - ffffffff819f3000) [ 0.041775] smpboot: APIC(0) Converting physical 0 to logical package 0 [ 0.041844] smpboot: Max logical packages: 4 [ 0.041984] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.042532] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.082286] TSC deadline timer enabled [ 0.082290] smpboot: CPU0: Intel(R) Core(TM) i3-2377M CPU @ 1.50GHz (family: 0x6, model: 0x2a, stepping: 0x7) [ 0.082500] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.082825] ... version: 3 [ 0.082888] ... bit width: 48 [ 0.082950] ... generic registers: 4 [ 0.083013] ... value mask: 0000ffffffffffff [ 0.083078] ... max period: 0000ffffffffffff [ 0.083142] ... fixed-purpose events: 3 [ 0.083989] ... event mask: 000000070000000f [ 0.084936] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.085187] x86: Booting SMP configuration: [ 0.085251] .... node #0, CPUs: #1 #2 #3 [ 0.324480] x86: Booted up 1 node, 4 CPUs [ 0.324601] smpboot: Total of 4 processors activated (11976.00 BogoMIPS) [ 0.345048] devtmpfs: initialized [ 0.345236] x86/mm: Memory block size: 128MB [ 0.364982] PM: Registering ACPI NVS region [mem 0xa6ebf000-0xa6fbefff] (1048576 bytes) [ 0.365206] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.380929] pinctrl core: initialized pinctrl subsystem [ 0.393084] NET: Registered protocol family 16 [ 0.408945] cpuidle: using governor ladder [ 0.424955] cpuidle: using governor menu [ 0.425064] Simple Boot Flag at 0x44 set to 0x1 [ 0.425142] ACPI: bus type PCI registered [ 0.425205] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.457105] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.457193] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.457280] PCI: Using configuration type 1 for base access [ 0.457402] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.489174] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.525103] ACPI: Added _OSI(Module Device) [ 0.525170] ACPI: Added _OSI(Processor Device) [ 0.525233] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.525297] ACPI: Added _OSI(Processor Aggregator Device) [ 0.525672] ACPI: Executed 1 blocks of module-level executable AML code [ 0.535839] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.536839] ACPI: Dynamic OEM Table Load: [ 0.536996] ACPI: SSDT 0xFFFF88024545E000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20100121) [ 0.538472] ACPI: Dynamic OEM Table Load: [ 0.538626] ACPI: SSDT 0xFFFF880246837800 000303 (v01 PmRef ApIst 00003000 INTL 20100121) [ 0.539883] ACPI: Dynamic OEM Table Load: [ 0.540034] ACPI: SSDT 0xFFFF88024546EC00 000119 (v01 PmRef ApCst 00003000 INTL 20100121) [ 0.542445] ACPI : EC: EC started [ 0.542726] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC [ 0.542792] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.542876] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions [ 0.542958] ACPI: Interpreter enabled [ 0.543050] ACPI: (supports S0 S3 S4 S5) [ 0.543113] ACPI: Using IOAPIC for interrupt routing [ 0.543228] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.722559] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.722635] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.723041] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.724272] PCI host bridge to bus 0000:00 [ 0.724339] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.724408] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.724476] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.724560] pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfeafffff window] [ 0.724644] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.724719] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 [ 0.724903] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000 [ 0.724918] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc03fffff 64bit] [ 0.724926] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref] [ 0.724932] pci 0000:00:02.0: reg 0x20: [io 0x2000-0x203f] [ 0.725153] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 [ 0.725187] pci 0000:00:14.0: reg 0x10: [mem 0xc0600000-0xc060ffff 64bit] [ 0.725317] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.725419] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.725567] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 [ 0.725600] pci 0000:00:16.0: reg 0x10: [mem 0xc0614000-0xc061400f 64bit] [ 0.725727] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.725911] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 [ 0.726242] pci 0000:00:1a.0: reg 0x10: [mem 0xc0619000-0xc06193ff] [ 0.728099] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.728235] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.728386] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 [ 0.728417] pci 0000:00:1b.0: reg 0x10: [mem 0xc0610000-0xc0613fff 64bit] [ 0.728559] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.728668] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.728814] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 [ 0.728957] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.729068] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.729223] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400 [ 0.729369] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.729480] pci 0000:00:1c.1: System wakeup disabled by ACPI [ 0.729625] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400 [ 0.729772] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.729881] pci 0000:00:1c.2: System wakeup disabled by ACPI [ 0.730034] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 [ 0.730356] pci 0000:00:1d.0: reg 0x10: [mem 0xc0618000-0xc06183ff] [ 0.732228] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.732362] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.732508] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100 [ 0.732828] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601 [ 0.732858] pci 0000:00:1f.2: reg 0x10: [io 0x2088-0x208f] [ 0.732873] pci 0000:00:1f.2: reg 0x14: [io 0x2094-0x2097] [ 0.732888] pci 0000:00:1f.2: reg 0x18: [io 0x2080-0x2087] [ 0.732903] pci 0000:00:1f.2: reg 0x1c: [io 0x2090-0x2093] [ 0.732918] pci 0000:00:1f.2: reg 0x20: [io 0x2060-0x207f] [ 0.732933] pci 0000:00:1f.2: reg 0x24: [mem 0xc0617000-0xc06177ff] [ 0.733021] pci 0000:00:1f.2: PME# supported from D3hot [ 0.733193] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 [ 0.733227] pci 0000:00:1f.3: reg 0x10: [mem 0xc0615000-0xc06150ff 64bit] [ 0.733267] pci 0000:00:1f.3: reg 0x20: [io 0x2040-0x205f] [ 0.733567] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.733960] pci 0000:03:00.0: [8086:088e] type 00 class 0x028000 [ 0.734209] pci 0000:03:00.0: reg 0x10: [mem 0xc0500000-0xc0501fff 64bit] [ 0.735721] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.735943] pci 0000:03:00.0: System wakeup disabled by ACPI [ 0.745368] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.745442] pci 0000:00:1c.1: bridge window [mem 0xc0500000-0xc05fffff] [ 0.745635] pci 0000:04:00.0: [14e4:16b5] type 00 class 0x020000 [ 0.745679] pci 0000:04:00.0: reg 0x10: [mem 0xc0410000-0xc041ffff 64bit pref] [ 0.745709] pci 0000:04:00.0: reg 0x18: [mem 0xc0420000-0xc042ffff 64bit pref] [ 0.745766] pci 0000:04:00.0: reg 0x30: [mem 0xfffff800-0xffffffff pref] [ 0.745920] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.745998] pci 0000:04:00.0: System wakeup disabled by ACPI [ 0.746183] pci 0000:04:00.1: [14e4:16bc] type 00 class 0x080501 [ 0.746227] pci 0000:04:00.1: reg 0x10: [mem 0xc0400000-0xc040ffff 64bit pref] [ 0.746478] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold [ 0.757344] pci 0000:00:1c.2: PCI bridge to [bus 04] [ 0.757426] pci 0000:00:1c.2: bridge window [mem 0xc0400000-0xc04fffff 64bit pref] [ 0.841973] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 0.842706] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.843382] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.844056] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.844728] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.845506] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.846174] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.846847] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 0.847598] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.847835] ACPI : EC: event unblocked [ 0.847905] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.847988] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events [ 0.848322] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.848389] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.848475] vgaarb: loaded [ 0.848536] vgaarb: bridge control possible 0000:00:02.0 [ 0.848710] PCI: Using ACPI for IRQ routing [ 0.856800] PCI: pci_cache_line_size set to 64 bytes [ 0.856981] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.856983] e820: reserve RAM buffer [mem 0xa6abf000-0xa7ffffff] [ 0.856984] e820: reserve RAM buffer [mem 0xa7000000-0xa7ffffff] [ 0.856986] e820: reserve RAM buffer [mem 0x24f600000-0x24fffffff] [ 0.857242] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.857681] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.859770] clocksource: Switched to clocksource hpet [ 0.859883] VFS: Disk quotas dquot_6.6.0 [ 0.871816] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.887893] pnp: PnP ACPI init [ 0.888066] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.888226] pnp 00:01: Plug and Play ACPI device, IDs ETD0502 PNP0f13 (active) [ 0.888459] system 00:02: [io 0x0680-0x069f] has been reserved [ 0.888527] system 00:02: [io 0xfd60-0xfd63] has been reserved [ 0.888595] system 00:02: [io 0x1000-0x100f] has been reserved [ 0.888662] system 00:02: [io 0xffff] has been reserved [ 0.888728] system 00:02: [io 0xffff] has been reserved [ 0.888794] system 00:02: [io 0x0400-0x0453] has been reserved [ 0.888859] system 00:02: [io 0x0458-0x047f] has been reserved [ 0.888926] system 00:02: [io 0x0500-0x057f] has been reserved [ 0.888993] system 00:02: [io 0x164e-0x164f] has been reserved [ 0.889062] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.889112] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.889216] system 00:04: [io 0x0454-0x0457] has been reserved [ 0.889285] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.972143] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.972212] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.972280] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.972349] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.972418] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved [ 0.972487] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.972555] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.972623] system 00:05: [mem 0xff000000-0xff000fff] has been reserved [ 0.972692] system 00:05: [mem 0xff010000-0xffffffff] could not be reserved [ 0.972762] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.972831] system 00:05: [mem 0xafa00000-0xafa00fff] has been reserved [ 0.972901] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.973413] system 00:06: [mem 0x20000000-0x201fffff] has been reserved [ 0.973481] system 00:06: [mem 0x40000000-0x401fffff] has been reserved [ 0.973551] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.973584] pnp: PnP ACPI: found 7 devices [ 0.981441] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.981532] pci 0000:04:00.0: can't claim BAR 6 [mem 0xfffff800-0xffffffff pref]: no compatible bridge window [ 0.981638] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 0.981641] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 [ 0.981644] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000 [ 0.981676] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000 [ 0.981678] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000 [ 0.981681] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.981683] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.981685] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000 [ 0.981687] pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000 [ 0.981692] pci 0000:00:1c.0: BAR 14: assigned [mem 0xafb00000-0xafcfffff] [ 0.981766] pci 0000:00:1c.0: BAR 15: assigned [mem 0xafd00000-0xafefffff 64bit pref] [ 0.981850] pci 0000:00:1c.2: BAR 14: assigned [mem 0xaff00000-0xafffffff] [ 0.981920] pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff] [ 0.981990] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.982057] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.982131] pci 0000:00:1c.0: bridge window [mem 0xafb00000-0xafcfffff] [ 0.982203] pci 0000:00:1c.0: bridge window [mem 0xafd00000-0xafefffff 64bit pref] [ 0.982295] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.982366] pci 0000:00:1c.1: bridge window [mem 0xc0500000-0xc05fffff] [ 0.982449] pci 0000:04:00.0: BAR 6: assigned [mem 0xaff00000-0xaff007ff pref] [ 0.982532] pci 0000:00:1c.2: PCI bridge to [bus 04] [ 0.982603] pci 0000:00:1c.2: bridge window [mem 0xaff00000-0xafffffff] [ 0.982676] pci 0000:00:1c.2: bridge window [mem 0xc0400000-0xc04fffff 64bit pref] [ 0.982769] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.982771] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.982773] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.982775] pci_bus 0000:00: resource 7 [mem 0xafa00000-0xfeafffff window] [ 0.982777] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff] [ 0.982779] pci_bus 0000:02: resource 1 [mem 0xafb00000-0xafcfffff] [ 0.982781] pci_bus 0000:02: resource 2 [mem 0xafd00000-0xafefffff 64bit pref] [ 0.982783] pci_bus 0000:03: resource 1 [mem 0xc0500000-0xc05fffff] [ 0.982784] pci_bus 0000:04: resource 1 [mem 0xaff00000-0xafffffff] [ 0.982786] pci_bus 0000:04: resource 2 [mem 0xc0400000-0xc04fffff 64bit pref] [ 1.027799] NET: Registered protocol family 2 [ 1.043895] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 1.044240] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes) [ 1.044978] TCP: Hash tables configured (established 65536 bind 65536) [ 1.045104] UDP hash table entries: 4096 (order: 6, 393216 bytes) [ 1.045316] UDP-Lite hash table entries: 4096 (order: 6, 393216 bytes) [ 1.059787] NET: Registered protocol family 1 [ 1.059889] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.100027] PCI: CLS 64 bytes, default 64 [ 1.100101] Unpacking initramfs... [ 1.410846] Freeing initrd memory: 10548K (ffff880036b56000 - ffff8800375a3000) [ 1.410936] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.411005] software IO TLB [mem 0xa2abf000-0xa6abf000] (64MB) mapped at [ffff8800a2abf000-ffff8800a6abefff] [ 1.411206] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 1.411289] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 1.411355] RAPL PMU: hw unit of domain package 2^-16 Joules [ 1.411421] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules [ 1.412266] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 1.431814] audit: initializing netlink subsys (disabled) [ 1.431916] audit: type=2000 audit(1477946539.416:1): initialized [ 1.432751] workingset: timestamp_bits=40 max_order=21 bucket_order=0 [ 1.432878] zbud: loaded [ 1.503825] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.503969] io scheduler noop registered [ 1.504821] io scheduler deadline registered [ 1.527807] io scheduler cfq registered (default) [ 1.528670] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.528745] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.528836] intel_idle: MWAIT substates: 0x21120 [ 1.528837] intel_idle: v0.4.1 model 0x2A [ 1.529144] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.529463] GHES: HEST is not enabled! [ 1.529655] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.530442] Linux agpgart interface v0.103 [ 1.530581] AMD IOMMUv2 driver by Joerg Roedel [ 1.530647] AMD IOMMUv2 functionality not available on this system [ 1.530763] Failed to find cpu0 device node [ 1.530825] Unable to detect cache hierarchy from DT for CPU 0 [ 1.530953] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 1.543886] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.543957] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.544241] mousedev: PS/2 mouse device common for all mice [ 1.544472] rtc_cmos 00:03: RTC can wake from S4 [ 1.544699] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.544795] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs [ 1.544892] intel_pstate: Intel P-state driver initializing [ 1.545287] ledtrig-cpu: registered to indicate activity on CPUs [ 1.562348] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.599935] NET: Registered protocol family 10 [ 1.600672] mip6: Mobile IPv6 [ 1.600751] NET: Registered protocol family 17 [ 1.600832] mpls_gso: MPLS GSO support [ 1.601636] microcode: sig=0x206a7, pf=0x10, revision=0x28 [ 1.602050] microcode: Microcode Update Driver: v2.01 , Peter Oruba [ 1.603077] registered taskstats version 1 [ 1.603197] zswap: loaded using pool lzo/zbud [ 1.604183] rtc_cmos 00:03: setting system clock to 2016-10-31 20:42:20 UTC (1477946540) [ 1.604460] PM: Hibernation image not present or could not be loaded. [ 1.606991] Freeing unused kernel memory: 1136K (ffffffff818d1000 - ffffffff819ed000) [ 1.607092] Write protecting the kernel read-only data: 8192k [ 1.607799] Freeing unused kernel memory: 704K (ffff880001550000 - ffff880001600000) [ 1.608959] Freeing unused kernel memory: 148K (ffff8800017db000 - ffff880001800000) [ 1.682271] systemd-udevd[83]: starting version 215 [ 1.682845] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.715566] ACPI: bus type USB registered [ 1.715707] usbcore: registered new interface driver usbfs [ 1.715844] usbcore: registered new interface driver hub [ 1.715967] usbcore: registered new device driver usb [ 1.717915] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.718279] ehci-pci: EHCI PCI platform driver [ 1.718563] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.718638] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.718737] ehci-pci 0000:00:1a.0: debug port 2 [ 1.720005] pps_core: LinuxPPS API ver. 1 registered [ 1.720117] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.720917] sdhci: Secure Digital Host Controller Interface driver [ 1.721027] sdhci: Copyright(c) Pierre Ossman [ 1.721271] PTP clock support registered [ 1.722445] sdhci-pci 0000:04:00.1: SDHCI controller found [14e4:16bc] (rev 10) [ 1.722706] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 1.722738] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc0619000 [ 1.724357] SCSI subsystem initialized [ 1.724858] mmc0: SDHCI controller on PCI [0000:04:00.1] using ADMA 64-bit [ 1.725004] tg3.c:v3.137 (May 11, 2014) [ 1.726120] libata version 3.00 loaded. [ 1.737373] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.737522] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.737605] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.737699] usb usb1: Product: EHCI Host Controller [ 1.737771] usb usb1: Manufacturer: Linux 4.9.0-rc2-00003-g414e1a5 ehci_hcd [ 1.737841] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.738554] hub 1-0:1.0: USB hub found [ 1.738735] hub 1-0:1.0: 2 ports detected [ 1.739694] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.739769] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.740182] ehci-pci 0000:00:1d.0: debug port 2 [ 1.744160] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 1.744198] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc0618000 [ 1.759840] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.760000] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.760075] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.760170] usb usb2: Product: EHCI Host Controller [ 1.760241] usb usb2: Manufacturer: Linux 4.9.0-rc2-00003-g414e1a5 ehci_hcd [ 1.760316] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.761750] tg3 0000:04:00.0 eth0: Tigon3 [partno(BCM57785) rev 57785100] (PCI Express) MAC address b8:88:e3:a5:16:6f [ 1.761851] tg3 0000:04:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 1.761948] tg3 0000:04:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 1.762037] tg3 0000:04:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit] [ 1.762557] hub 2-0:1.0: USB hub found [ 1.762636] hub 2-0:1.0: 2 ports detected [ 1.763336] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.763431] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 1.764760] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930 [ 1.764859] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.765041] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.765117] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.765205] usb usb3: Product: xHCI Host Controller [ 1.765271] usb usb3: Manufacturer: Linux 4.9.0-rc2-00003-g414e1a5 xhci-hcd [ 1.765347] usb usb3: SerialNumber: 0000:00:14.0 [ 1.765668] hub 3-0:1.0: USB hub found [ 1.765751] hub 3-0:1.0: 4 ports detected [ 1.766602] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.766674] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 1.766805] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.766875] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.766958] usb usb4: Product: xHCI Host Controller [ 1.767023] usb usb4: Manufacturer: Linux 4.9.0-rc2-00003-g414e1a5 xhci-hcd [ 1.767092] usb usb4: SerialNumber: 0000:00:14.0 [ 1.767380] hub 4-0:1.0: USB hub found [ 1.767464] hub 4-0:1.0: 4 ports detected [ 1.768932] ahci 0000:00:1f.2: version 3.0 [ 1.769187] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 1.769284] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode [ 1.769373] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst [ 1.771411] scsi host0: ahci [ 1.771679] scsi host1: ahci [ 1.771959] scsi host2: ahci [ 1.772200] scsi host3: ahci [ 1.772440] scsi host4: ahci [ 1.772682] scsi host5: ahci [ 1.772863] ata1: SATA max UDMA/133 abar m2048@0xc0617000 port 0xc0617100 irq 19 [ 1.772950] ata2: DUMMY [ 1.773010] ata3: DUMMY [ 1.773068] ata4: DUMMY [ 1.773128] ata5: DUMMY [ 1.773187] ata6: DUMMY [ 2.063892] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 2.087886] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 2.088167] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.101100] ata1.00: ATA-8: KINGSTON SV300S37A120G, 583ABBF0, max UDMA/133 [ 2.101178] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 2.110650] ata1.00: configured for UDMA/133 [ 2.111360] scsi 0:0:0:0: Direct-Access ATA KINGSTON SV300S3 BBF0 PQ: 0 ANSI: 5 [ 2.147270] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB) [ 2.147563] sd 0:0:0:0: [sda] Write Protect is off [ 2.147659] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.147756] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.149125] sda: sda1 sda2 < sda5 > [ 2.150194] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.151122] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.216640] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 2.216744] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.217376] hub 1-1:1.0: USB hub found [ 2.217573] hub 1-1:1.0: 6 ports detected [ 2.219897] device-mapper: uevent: version 1.0.3 [ 2.240607] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 2.240706] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.241445] hub 2-1:1.0: USB hub found [ 2.241704] hub 2-1:1.0: 8 ports detected [ 2.243526] random: fast init done [ 2.252123] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 2.263673] PM: Starting manual resume from disk [ 2.263758] PM: Hibernation image partition 8:5 present [ 2.263759] PM: Looking for hibernation image. [ 2.265516] PM: Image not found (code -22) [ 2.265519] PM: Hibernation image not present or could not be loaded. [ 2.411849] tsc: Refined TSC clocksource calibration: 1496.600 MHz [ 2.411957] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x159296d3708, max_idle_ns: 440795218047 ns [ 2.492836] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x461f02) [ 2.503923] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 2.515645] psmouse serio1: elantech: Synaptics capabilities query result 0x01, 0x16, 0x0c. [ 2.539517] psmouse serio1: elantech: Elan sample query result 02, 33, 85 [ 2.576290] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 2.616174] usb 1-1.1: New USB device found, idVendor=8087, idProduct=07da [ 2.616254] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.658614] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR) [ 2.658936] systemd[1]: Detected architecture 'x86-64'. [ 2.663105] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input2 [ 2.677022] systemd[1]: Inserted module 'autofs4' [ 2.677526] systemd[1]: Set hostname to . [ 2.695823] usb 1-1.3: new high-speed USB device number 4 using ehci-pci [ 2.770069] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. [ 2.770255] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 2.770357] systemd[1]: Starting Remote File Systems (Pre). [ 2.770786] systemd[1]: Reached target Remote File Systems (Pre). [ 2.770881] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch. [ 2.771011] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 2.800656] lp: driver loaded but no devices found [ 2.803093] ppdev: user-space parallel port driver [ 2.843311] systemd-udevd[208]: starting version 215 [ 2.914497] fuse init (API version 7.26) [ 2.917173] usb 1-1.3: New USB device found, idVendor=064e, idProduct=e330 [ 2.917292] usb 1-1.3: New USB device strings: Mfr=3, Product=1, SerialNumber=0 [ 2.917383] usb 1-1.3: Product: HD WebCam [ 2.917450] usb 1-1.3: Manufacturer: SuYin [ 2.968671] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input3 [ 2.968772] ACPI: Power Button [PWRB] [ 2.970725] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0D:00/input/input4 [ 2.970909] ACPI: Lid Switch [LID0] [ 2.972185] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0E:00/input/input5 [ 2.972283] ACPI: Sleep Button [SLPB] [ 2.972743] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 [ 2.972833] ACPI: Power Button [PWRF] [ 2.978583] wmi: Mapper loaded [ 2.989181] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 3.042056] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 3.042481] ACPI: AC Adapter [ACAD] (off-line) [ 3.060671] [drm] Initialized [ 3.067472] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20160831/utaddress-247) [ 3.067770] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.068030] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) [ 3.068238] (20160831/utaddress-247) [ 3.068279] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.068499] ACPI Warning: [ 3.068553] SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) [ 3.068600] (20160831/utaddress-247) [ 3.068602] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.068704] ACPI Warning: [ 3.068759] SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) [ 3.068807] (20160831/utaddress-247) [ 3.068809] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.068918] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 3.069403] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 3.072809] Intel(R) Wireless WiFi driver for Linux [ 3.072885] Copyright(c) 2003- 2015 Intel Corporation [ 3.073230] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 3.085213] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm [ 3.107042] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 3.107607] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled [ 3.107675] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled [ 3.107739] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled [ 3.107869] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6235 AGN, REV=0xB0 [ 3.110082] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled [ 3.117286] Error: Driver 'pcspkr' is already registered, aborting... [ 3.118101] Bluetooth: Core ver 2.22 [ 3.118607] NET: Registered protocol family 31 [ 3.119020] Bluetooth: HCI device and connection manager initialized [ 3.119477] Bluetooth: HCI socket layer initialized [ 3.119979] Bluetooth: L2CAP socket layer initialized [ 3.120534] Bluetooth: SCO socket layer initialized [ 3.129598] usbcore: registered new interface driver btusb [ 3.139651] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 3.196137] [drm] Memory usable by graphics device = 2048M [ 3.196206] [drm] Replacing VGA console driver [ 3.196922] Console: switching to colour dummy device 80x25 [ 3.196989] pmd_set_huge: Cannot satisfy [mem 0xb0000000-0xb0200000] with a huge-page mapping due to MTRR override. [ 3.198200] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC271X: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 3.198211] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 3.198221] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 3.198230] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 3.198235] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 3.198242] snd_hda_codec_realtek hdaudioC0D0: Mic=0x1b [ 3.204207] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.204220] [drm] Driver supports precise vblank timestamp query. [ 3.204992] acer_wmi: Acer Laptop ACPI-WMI Extras [ 3.205018] acer_wmi: Function bitmap for Communication Button: 0x801 [ 3.207227] input: Acer WMI hotkeys as /devices/virtual/input/input10 [ 3.209696] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 3.215828] input: Acer BMA150 accelerometer as /devices/virtual/input/input11 [ 3.218529] iTCO_vendor_support: vendor-support=0 [ 3.220265] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 3.221008] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460) [ 3.222488] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 3.238970] media: Linux media interface: v0.10 [ 3.243035] Linux video capture interface: v2.00 [ 3.253748] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 3.254120] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12 [ 3.254389] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 3.254419] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0 [ 3.257604] fbcon: inteldrmfb (fb0) is primary device [ 3.265482] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 3.266011] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 3.266122] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 3.330744] uvcvideo: Found UVC 1.00 device HD WebCam (064e:e330) [ 3.336458] uvcvideo 1-1.3:1.0: Entity type for entity Extension 4 was not initialized! [ 3.336464] uvcvideo 1-1.3:1.0: Entity type for entity Processing 2 was not initialized! [ 3.336467] uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initialized! [ 3.336659] input: HD WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input14 [ 3.336801] usbcore: registered new interface driver uvcvideo [ 3.336802] USB Video Class driver (1.1.1) [ 3.339127] intel_rapl: Found RAPL domain package [ 3.339130] intel_rapl: Found RAPL domain core [ 3.339133] intel_rapl: Found RAPL domain uncore [ 3.339150] intel_rapl: RAPL package 0 domain package locked by BIOS [ 3.436131] clocksource: Switched to clocksource tsc [ 3.448090] ACPI: Battery Slot [BAT1] (battery present) [ 4.036122] Console: switching to colour frame buffer device 170x48 [ 4.060897] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 4.074607] Adding 4789244k swap on /dev/sda5. Priority:-1 extents:1 across:4789244k SSFS [ 4.211372] systemd-journald[204]: Received request to flush runtime journal from PID 1 [ 4.452054] RPC: Registered named UNIX socket transport module. [ 4.454601] RPC: Registered udp transport module. [ 4.457167] RPC: Registered tcp transport module. [ 4.459607] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 4.495876] FS-Cache: Loaded [ 4.504856] FS-Cache: Netfs 'nfs' registered for caching [ 4.584398] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 4.779193] cgroup: new mount options do not match the existing superblock, will be ignored [ 4.939256] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 4.939258] Bluetooth: BNEP filters: protocol multicast [ 4.939263] Bluetooth: BNEP socket layer initialized [ 6.576955] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled [ 6.583572] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled [ 6.583667] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [ 6.866629] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled [ 6.873254] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled [ 6.873345] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [ 10.275431] wlan0: authenticate with 30:91:8f:ce:fc:67 [ 10.278747] wlan0: send auth to 30:91:8f:ce:fc:67 (try 1/3) [ 10.282832] wlan0: authenticated [ 10.283889] wlan0: associate with 30:91:8f:ce:fc:67 (try 1/3) [ 10.287591] wlan0: RX AssocResp from 30:91:8f:ce:fc:67 (capab=0x411 status=0 aid=5) [ 10.309769] wlan0: associated [ 21.606524] random: crng init done