| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <711f4964-e655-4007-9804-f45bd47fed73@broadcom.com>
Date: Tue, 1 Nov 2016 13:34:30 -0700
From: Scott Branden <scott.branden@...adcom.com>
To: Jon Mason <jon.mason@...adcom.com>,
David Miller <davem@...emloft.net>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Florian Fainelli <f.fainelli@...il.com>
Cc: rafal@...ecki.pl, bcm-kernel-feedback-list@...adcom.com,
netdev@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v4 6/7] net: ethernet: bgmac: add NS2 support
One change in this patch
On 16-11-01 01:04 PM, Jon Mason wrote:
> Add support for the variant of amac hardware present in the Broadcom
> Northstar2 based SoCs. Northstar2 requires an additional register to be
> configured with the port speed/duplexity (NICPM). This can be added to
> the link callback to hide it from the instances that do not use this.
> Also, clearing of the pending interrupts on init is required due to
> observed issues on some platforms.
>
> Signed-off-by: Jon Mason <jon.mason@...adcom.com>
> ---
> drivers/net/ethernet/broadcom/bgmac-platform.c | 56 +++++++++++++++++++++++++-
> drivers/net/ethernet/broadcom/bgmac.c | 3 ++
> drivers/net/ethernet/broadcom/bgmac.h | 1 +
> 3 files changed, 58 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/ethernet/broadcom/bgmac-platform.c b/drivers/net/ethernet/broadcom/bgmac-platform.c
> index aed5dc5..f6d48c7 100644
> --- a/drivers/net/ethernet/broadcom/bgmac-platform.c
> +++ b/drivers/net/ethernet/broadcom/bgmac-platform.c
> @@ -14,12 +14,21 @@
> #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
>
> #include <linux/bcma/bcma.h>
> +#include <linux/brcmphy.h>
> #include <linux/etherdevice.h>
> #include <linux/of_address.h>
> #include <linux/of_mdio.h>
> #include <linux/of_net.h>
> #include "bgmac.h"
>
> +#define NICPM_IOMUX_CTRL 0x00000008
> +
> +#define NICPM_IOMUX_CTRL_INIT_VAL 0x3196e000
> +#define NICPM_IOMUX_CTRL_SPD_SHIFT 10
> +#define NICPM_IOMUX_CTRL_SPD_10M 0
> +#define NICPM_IOMUX_CTRL_SPD_100M 1
> +#define NICPM_IOMUX_CTRL_SPD_1000M 2
> +
> static u32 platform_bgmac_read(struct bgmac *bgmac, u16 offset)
> {
> return readl(bgmac->plat.base + offset);
> @@ -87,12 +96,46 @@ static void platform_bgmac_cmn_maskset32(struct bgmac *bgmac, u16 offset,
> WARN_ON(1);
> }
>
> +static void bgmac_nicpm_speed_set(struct net_device *net_dev)
> +{
> + struct bgmac *bgmac = netdev_priv(net_dev);
> + u32 val;
> +
> + if (!bgmac->plat.nicpm_base)
> + return;
> +
> + val = NICPM_IOMUX_CTRL_INIT_VAL;
> + switch (bgmac->net_dev->phydev->speed) {
> + default:
> + pr_err("Unsupported speed. Defaulting to 1000Mb\n");
This should be dev_err
> + case SPEED_1000:
> + val |= NICPM_IOMUX_CTRL_SPD_1000M << NICPM_IOMUX_CTRL_SPD_SHIFT;
> + break;
> + case SPEED_100:
> + val |= NICPM_IOMUX_CTRL_SPD_100M << NICPM_IOMUX_CTRL_SPD_SHIFT;
> + break;
> + case SPEED_10:
> + val |= NICPM_IOMUX_CTRL_SPD_10M << NICPM_IOMUX_CTRL_SPD_SHIFT;
> + break;
> + }
> +
> + writel(val, bgmac->plat.nicpm_base + NICPM_IOMUX_CTRL);
> +
> + bgmac_adjust_link(bgmac->net_dev);
> +}
> +
> static int platform_phy_connect(struct bgmac *bgmac)
> {
> struct phy_device *phy_dev;
>
> - phy_dev = of_phy_get_and_connect(bgmac->net_dev, bgmac->dev->of_node,
> - bgmac_adjust_link);
> + if (bgmac->plat.nicpm_base)
> + phy_dev = of_phy_get_and_connect(bgmac->net_dev,
> + bgmac->dev->of_node,
> + bgmac_nicpm_speed_set);
> + else
> + phy_dev = of_phy_get_and_connect(bgmac->net_dev,
> + bgmac->dev->of_node,
> + bgmac_adjust_link);
> if (!phy_dev) {
> dev_err(bgmac->dev, "Phy connect failed\n");
> return -ENODEV;
> @@ -182,6 +225,14 @@ static int bgmac_probe(struct platform_device *pdev)
> if (IS_ERR(bgmac->plat.idm_base))
> return PTR_ERR(bgmac->plat.idm_base);
>
> + regs = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nicpm_base");
> + if (regs) {
> + bgmac->plat.nicpm_base = devm_ioremap_resource(&pdev->dev,
> + regs);
> + if (IS_ERR(bgmac->plat.nicpm_base))
> + return PTR_ERR(bgmac->plat.nicpm_base);
> + }
> +
> bgmac->read = platform_bgmac_read;
> bgmac->write = platform_bgmac_write;
> bgmac->idm_read = platform_bgmac_idm_read;
> @@ -213,6 +264,7 @@ static int bgmac_remove(struct platform_device *pdev)
> static const struct of_device_id bgmac_of_enet_match[] = {
> {.compatible = "brcm,amac",},
> {.compatible = "brcm,nsp-amac",},
> + {.compatible = "brcm,ns2-amac",},
> {},
> };
>
> diff --git a/drivers/net/ethernet/broadcom/bgmac.c b/drivers/net/ethernet/broadcom/bgmac.c
> index 4584958..a805cc8 100644
> --- a/drivers/net/ethernet/broadcom/bgmac.c
> +++ b/drivers/net/ethernet/broadcom/bgmac.c
> @@ -1082,6 +1082,9 @@ static void bgmac_enable(struct bgmac *bgmac)
> /* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipinit */
> static void bgmac_chip_init(struct bgmac *bgmac)
> {
> + /* Clear any erroneously pending interrupts */
> + bgmac_write(bgmac, BGMAC_INT_STATUS, ~0);
> +
> /* 1 interrupt per received frame */
> bgmac_write(bgmac, BGMAC_INT_RECV_LAZY, 1 << BGMAC_IRL_FC_SHIFT);
>
> diff --git a/drivers/net/ethernet/broadcom/bgmac.h b/drivers/net/ethernet/broadcom/bgmac.h
> index ea52ac3..b1820ea 100644
> --- a/drivers/net/ethernet/broadcom/bgmac.h
> +++ b/drivers/net/ethernet/broadcom/bgmac.h
> @@ -463,6 +463,7 @@ struct bgmac {
> struct {
> void *base;
> void *idm_base;
> + void *nicpm_base;
> } plat;
> struct {
> struct bcma_device *core;
>
Powered by blists - more mailing lists