linux-kernel - [PATCH net-next 00/11] net: dsa: mv88e6xxx: refine port operations

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20161101032023.32762-1-vivien.didelot@savoirfairelinux.com>
Date:   Tue,  1 Nov 2016 04:20:12 +0100
From:   Vivien Didelot <vivien.didelot@...oirfairelinux.com>
To:     netdev@...r.kernel.org
Cc:     linux-kernel@...r.kernel.org, kernel@...oirfairelinux.com,
        "David S. Miller" <davem@...emloft.net>,
        Florian Fainelli <f.fainelli@...il.com>,
        Andrew Lunn <andrew@...n.ch>,
        Vivien Didelot <vivien.didelot@...oirfairelinux.com>
Subject: [PATCH net-next 00/11] net: dsa: mv88e6xxx: refine port operations

The Marvell chips have one internal SMI device per port, containing a
set of registers used to configure a port's link, STP state, default
VLAN or addresses database, etc.

This patchset creates port files to implement the port operations as
described in datasheets, and extend the chip ops structure with them.

Patches 1 to 6 implement accessors for port's STP state, port based VLAN
map, default FID, default VID, and 802.1Q mode.

Patches 7 to 11 implement the port's MAC setup of link state, duplex
mode, RGMII delay and speed, all accessed through port's register 0x01.

The new port's MAC setup code is used to re-implement the adjust_link
code and correctly force the link down before changing any of the MAC
settings, as requested by the datasheets.

The port's MAC accessors use values compatible with struct phy_device
(e.g. DUPLEX_FULL) and extend them when needed (e.g. SPEED_MAX).

Vivien Didelot (11):
  net: dsa: mv88e6xxx: add port files
  net: dsa: mv88e6xxx: add port state setter
  net: dsa: mv88e6xxx: add port vlan map setter
  net: dsa: mv88e6xxx: add port FID accessors
  net: dsa: mv88e6xxx: add port PVID accessors
  net: dsa: mv88e6xxx: add port 802.1Q mode setter
  net: dsa: mv88e6xxx: add port link setter
  net: dsa: mv88e6xxx: add port duplex setter
  net: dsa: mv88e6xxx: add port's RGMII delay setter
  net: dsa: mv88e6xxx: add port's MAC speed setter
  net: dsa: mv88e6xxx: setup port's MAC

 drivers/net/dsa/mv88e6xxx/Makefile    |   1 +
 drivers/net/dsa/mv88e6xxx/chip.c      | 434 +++++++++---------------------
 drivers/net/dsa/mv88e6xxx/mv88e6xxx.h |  44 ++-
 drivers/net/dsa/mv88e6xxx/port.c      | 487 ++++++++++++++++++++++++++++++++++
 drivers/net/dsa/mv88e6xxx/port.h      |  52 ++++
 5 files changed, 710 insertions(+), 308 deletions(-)
 create mode 100644 drivers/net/dsa/mv88e6xxx/port.c
 create mode 100644 drivers/net/dsa/mv88e6xxx/port.h

-- 
2.10.2