[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20161104174240.9688-1-afd@ti.com>
Date: Fri, 4 Nov 2016 12:42:38 -0500
From: "Andrew F. Davis" <afd@...com>
To: Nishanth Menon <nm@...com>, Tero Kristo <t-kristo@...com>,
Santosh Shilimkar <ssantosh@...nel.org>,
Philipp Zabel <p.zabel@...gutronix.de>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>, Suman Anna <s-anna@...com>
CC: <linux-arm-kernel@...ts.infradead.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
"Andrew F . Davis" <afd@...com>
Subject: [PATCH v3 0/2] Add TI SCI Reset Driver
Hello all,
This series adds a reset controller driver that uses the TI SCI
protocol to manage resets.
The TI SCI protocol is used to communicate with power management
controllers used by some SoCs. These controllers manage the various
power domains, clocks, and resets available on a SoC.
This series is based on drivers for TI SCI and the first two controlled
elements above, these series can be found here:
TI-SCI: http://www.spinics.net/lists/arm-kernel/msg536851.html
PM Domains: http://www.spinics.net/lists/devicetree/msg146621.html
Clocks: https://www.spinics.net/lists/linux-clk/msg12785.html
Thanks,
Andrew
Changes from v2:
- Merged DT binding patch and reset header patch
- Added locking for reset bit mask
Changes from v1:
- Revised dt binding
- CC Linux ARM list
Andrew F. Davis (2):
Documentation: dt: reset: Add TI SCI reset binding
reset: Add the TI SCI reset driver
.../devicetree/bindings/reset/ti,sci-reset.txt | 65 +++++
MAINTAINERS | 3 +
drivers/reset/Kconfig | 9 +
drivers/reset/Makefile | 1 +
drivers/reset/reset-ti-sci.c | 272 +++++++++++++++++++++
include/dt-bindings/reset/k2g.h | 22 ++
6 files changed, 372 insertions(+)
create mode 100644 Documentation/devicetree/bindings/reset/ti,sci-reset.txt
create mode 100644 drivers/reset/reset-ti-sci.c
create mode 100644 include/dt-bindings/reset/k2g.h
--
2.10.1
Powered by blists - more mailing lists