[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <1478281075-3498-1-git-send-email-ldewangan@nvidia.com>
Date: Fri, 4 Nov 2016 23:07:54 +0530
From: Laxman Dewangan <ldewangan@...dia.com>
To: <broonie@...nel.org>, <robh+dt@...nel.org>, <mark.rutland@....com>
CC: <linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
Laxman Dewangan <ldewangan@...dia.com>,
Douglas Anderson <dianders@...omium.org>,
Aleksandr Frid <afrid@...dia.com>
Subject: [PATCH 1/2] regulator: pwm: DT: Add ramp delay for exponential voltage transition
Some PWM regulator has the exponential transition in voltage change as
opposite to fixed slew-rate linear transition on other regulators.
For such PWM regulators, add the property for providing the delay
from DT node.
Add DT binding details of the new property
"pwm-regulator-voltage-ramp-time-us" added for providing voltage
transition delay.
Signed-off-by: Laxman Dewangan <ldewangan@...dia.com>
CC: Douglas Anderson <dianders@...omium.org>
CC: Aleksandr Frid <afrid@...dia.com>
---
This patch is continuation of discussion on patch
regulator: pwm: Fix regulator ramp delay for continuous mode
https://patchwork.kernel.org/patch/9216857/
where is it discussed to have separate property for PWM which has
exponential voltage transition.
---
Documentation/devicetree/bindings/regulator/pwm-regulator.txt | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/Documentation/devicetree/bindings/regulator/pwm-regulator.txt b/Documentation/devicetree/bindings/regulator/pwm-regulator.txt
index 3aeba9f..a163f42 100644
--- a/Documentation/devicetree/bindings/regulator/pwm-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/pwm-regulator.txt
@@ -54,6 +54,16 @@ Optional properties:
--------------------
- enable-gpios: GPIO to use to enable/disable the regulator
+- pwm-regulator-voltage-ramp-time-us: Integer, voltage ramp time in
+ microseconds. Some PWM regulator has the exponential
+ transition in voltage change as opposite to fixed
+ slew-rate linear transition on other regulators.
+ For such regulator, this property is used to provide
+ the settling time for voltage change which is same
+ for any voltage change.
+ If PWM regulator supports the fixed slew rate then
+ property "regulator-ramp-delay" should be used.
+
Any property defined as part of the core regulator binding can also be used.
(See: ../regulator/regulator.txt)
--
2.1.4
Powered by blists - more mailing lists