linux-kernel - Re: [PATCH net-next v2 00/11] net: dsa: mv88e6xxx: refine port operations

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-Id: <20161104.144046.144416497334140758.davem@davemloft.net>
Date:   Fri, 04 Nov 2016 14:40:46 -0400 (EDT)
From:   David Miller <davem@...emloft.net>
To:     vivien.didelot@...oirfairelinux.com
Cc:     netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
        kernel@...oirfairelinux.com, f.fainelli@...il.com, andrew@...n.ch
Subject: Re: [PATCH net-next v2 00/11] net: dsa: mv88e6xxx: refine port
 operations

From: Vivien Didelot <vivien.didelot@...oirfairelinux.com>
Date: Fri,  4 Nov 2016 03:23:25 +0100

> The Marvell chips have one internal SMI device per port, containing a
> set of registers used to configure a port's link, STP state, default
> VLAN or addresses database, etc.
> 
> This patchset creates port files to implement the port operations as
> described in datasheets, and extend the chip ops structure with them.
> 
> Patches 1 to 6 implement accessors for port's STP state, port based VLAN
> map, default FID, default VID, and 802.1Q mode.
> 
> Patches 7 to 11 implement the port's MAC setup of link state, duplex
> mode, RGMII delay and speed, all accessed through port's register 0x01.
> 
> The new port's MAC setup code is used to re-implement the adjust_link
> code and correctly force the link down before changing any of the MAC
> settings, as requested by the datasheets.
> 
> The port's MAC accessors use values compatible with struct phy_device
> (e.g. DUPLEX_FULL) and extend them when needed (e.g. SPEED_MAX).
> 
> Changes in v2:
> 
>   - Strictly use new _UNFORCED values instead of re-using _UNKNOWN ones.

Series applied, thanks Vivien.