[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <CACRpkdZ4EyicXz0rR6cm6xvRmsk4r5=jxyZ4Nn6rmgHt2QL0aA@mail.gmail.com>
Date: Fri, 4 Nov 2016 23:58:15 +0100
From: Linus Walleij <linus.walleij@...aro.org>
To: Michael Scott <michael.scott@...aro.org>
Cc: "linux-gpio@...r.kernel.org" <linux-gpio@...r.kernel.org>,
"linux-arm-msm@...r.kernel.org" <linux-arm-msm@...r.kernel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Andy Gross <andy.gross@...aro.org>,
David Brown <david.brown@...aro.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Joonwoo Park <joonwoop@...eaurora.org>,
Jeremy McNicoll <jeremymc@...hat.com>,
Stephen Boyd <sboyd@...eaurora.org>
Subject: Re: [PATCH V5] pinctrl: qcom: Add msm8994 pinctrl driver
On Thu, Nov 3, 2016 at 10:15 PM, Michael Scott <michael.scott@...aro.org> wrote:
> Initial pinctrl driver for QCOM msm8994 platforms.
>
> In order to continue the initial board support for QCOM msm8994/msm8992
> presented in patches from Jeremy McNicoll <jeremymc@...hat.com>, let's put
> a proper pinctrl driver in place.
>
> Currently, the DT for these platforms uses the msm8x74 pinctrl driver to
> enable basic UART. Beyond the first few pins the rest are different enough
> to justify it's own driver.
>
> Note: This driver is also used by QCOM's msm8992 platform as it's TLM block
> is the same.
>
> - Initial formatting and style was taken from the msm8x74 pinctrl driver
> added by Björn Andersson <bjorn.andersson@...aro.org>
> - Data was then adjusted per QCOM MSM8994v2 documentation for Top Level
> Multiplexing
> - Bindings documentation was based on qcom,msm8996-pinctrl.txt by
> Joonwoo Park <joonwoop@...eaurora.org> and then modified for msm8994
> content
>
> Signed-off-by: Michael Scott <michael.scott@...aro.org>
> Tested-by: Jeremy McNicoll <jeremymc@...hat.com>
> Acked-by: Bjorn Andersson <bjorn.andersson@...aro.org>
> Acked-by: Rob Herring <robh@...nel.org>
> ---
> V5:
This v5 version applied.
Yours,
Linus Walleij
Powered by blists - more mailing lists