[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20161107104357.24428-1-narmstrong@baylibre.com>
Date: Mon, 7 Nov 2016 11:43:54 +0100
From: Neil Armstrong <narmstrong@...libre.com>
To: khilman@...libre.com, carlo@...one.org
Cc: Neil Armstrong <narmstrong@...libre.com>,
linux-amlogic@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org
Subject: [PATCH 0/3] ARM64: dts: meson-gxl: Enable Ethernet
The Amlogic Meson GXL SoCs have an internal RMII PHY that is muxed with the
external RGMII pins.
The internal PHY is added in the GXL dtsi and support for each
board is added in intermediate board family dtsi or final dts.
This patchset depends on ARM64 dts patch at [1]
Changes since v2 RFC at : [3]
- Change phy Kconfig/Makefile alphabetic order
- GXL dtsi cleanup
- Add P230 External PHY reset
- Add external PHY compatible ID string
Changes since original RFC patchset at : [2]
- Remove meson8b experimental phy switching
- Switch to mdio-mux-mmioreg with extennded size support
- Add internal phy support for S905x and p231
- Add external PHY support for p230
[1] http://lkml.kernel.org/r/1477932286-27482-1-git-send-email-narmstrong@baylibre.com
[2] http://lkml.kernel.org/r/1477060838-14164-1-git-send-email-narmstrong@baylibre.com
[3] http://lkml.kernel.org/r/1477932987-27871-1-git-send-email-narmstrong@baylibre.com
Neil Armstrong (3):
ARM64: dts: meson-gxl: Add ethernet nodes with internal PHY
ARM64: dts: meson-gxl-p23x: Enable ethernet
ARM64: dts: meson-gxl-s905x: Enable internal ethernet PHY
.../boot/dts/amlogic/meson-gxl-s905d-p230.dts | 25 +++++++++++++
.../boot/dts/amlogic/meson-gxl-s905d-p231.dts | 6 +++
.../boot/dts/amlogic/meson-gxl-s905d-p23x.dtsi | 4 ++
arch/arm64/boot/dts/amlogic/meson-gxl-s905x.dtsi | 6 +++
arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 43 ++++++++++++++++++++++
5 files changed, 84 insertions(+)
--
2.7.0
Powered by blists - more mailing lists