linux-kernel - [PATCH] phy: rockchip-inno-usb2: correct 480MHz output clock stable time

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Mon,  7 Nov 2016 21:00:58 +0800
From:   William Wu <wulf@...k-chips.com>
To:     kishon@...com, heiko@...ech.de
Cc:     linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-rockchip@...ts.infradead.org, devicetree@...r.kernel.org,
        robh+dt@...nel.org, frank.wang@...k-chips.com,
        huangtao@...k-chips.com, dianders@...gle.com,
        briannorris@...gle.com, groeck@...gle.com, wulf@...k-chips.com
Subject: [PATCH] phy: rockchip-inno-usb2: correct 480MHz output clock stable time

We found that the system crashed due to 480MHz output clock of
USB2 PHY was unstable after clock had been enabled by gpu module.

Theoretically, 1 millisecond is a critical value for 480MHz
output clock stable time, so we try to change the delay time
to 1.2 millisecond to avoid this issue.

Signed-off-by: William Wu <wulf@...k-chips.com>
---
 drivers/phy/phy-rockchip-inno-usb2.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/phy/phy-rockchip-inno-usb2.c b/drivers/phy/phy-rockchip-inno-usb2.c
index ecfd7d1..8f2d2b6 100644
--- a/drivers/phy/phy-rockchip-inno-usb2.c
+++ b/drivers/phy/phy-rockchip-inno-usb2.c
@@ -267,7 +267,7 @@ static int rockchip_usb2phy_clk480m_enable(struct clk_hw *hw)
 			return ret;
 
 		/* waitting for the clk become stable */
-		mdelay(1);
+		udelay(1200);
 	}
 
 	return 0;
-- 
2.0.0