[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1478585341-6749-5-git-send-email-yong.mao@mediatek.com>
Date: Tue, 8 Nov 2016 14:09:01 +0800
From: Yong Mao <yong.mao@...iatek.com>
To: Ulf Hansson <ulf.hansson@...aro.org>
CC: Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will.deacon@....com>,
Matthias Brugger <matthias.bgg@...il.com>,
YH Huang <yh.huang@...iatek.com>,
Mathias Nyman <mathias.nyman@...ux.intel.com>,
Chunfeng Yun <chunfeng.yun@...iatek.com>,
Eddie Huang <eddie.huang@...iatek.com>,
Philipp Zabel <p.zabel@...gutronix.de>,
yong mao <yong.mao@...iatek.com>,
Chaotian Jing <chaotian.jing@...iatek.com>,
Nicolas Boichat <drinkcat@...omium.org>,
Douglas Anderson <dianders@...omium.org>,
Geert Uytterhoeven <geert@...ux-m68k.org>,
<devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <linux-mmc@...r.kernel.org>,
<linux-mediatek@...ts.infradead.org>, <srv_heupstream@...iatek.com>
Subject: [PATCH 4/4] dts: arm64: enable mmc3 for supporting sdio feature
From: yong mao <yong.mao@...iatek.com>
Add description of mmc3 for supporting sdio feature
Signed-off-by: Yong Mao <yong.mao@...iatek.com>
Signed-off-by: Chaotian Jing <chaotian.jing@...iatek.com>
---
arch/arm64/boot/dts/mediatek/mt8173-evb.dts | 82 +++++++++++++++++++++++++++
1 file changed, 82 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
index 2a7f731..4dbd299 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
@@ -43,6 +43,14 @@
enable-active-high;
};
+ sdio_fixed_3v3: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&pio 85 GPIO_ACTIVE_HIGH>;
+ };
+
connector {
compatible = "hdmi-connector";
label = "hdmi";
@@ -139,6 +147,25 @@
vqmmc-supply = <&mt6397_vmc_reg>;
};
+&mmc3 {
+ status = "okay";
+ pinctrl-names = "default", "state_uhs";
+ pinctrl-0 = <&mmc3_pins_default>;
+ pinctrl-1 = <&mmc3_pins_uhs>;
+ bus-width = <4>;
+ max-frequency = <200000000>;
+ cap-sd-highspeed;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ sdr104-clk-delay = <5>;
+ keep-power-in-suspend;
+ enable-sdio-wakeup;
+ cap-sdio-irq;
+ vmmc-supply = <&sdio_fixed_3v3>;
+ vqmmc-supply = <&mt6397_vgp3_reg>;
+ non-removable;
+};
+
&pio {
disp_pwm0_pins: disp_pwm0_pins {
pins1 {
@@ -197,6 +224,36 @@
};
};
+ mmc3_pins_default: mmc3default {
+ pins_dat {
+ pinmux = <MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0>,
+ <MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1>,
+ <MT8173_PIN_24_MSDC3_DAT2__FUNC_MSDC3_DAT2>,
+ <MT8173_PIN_25_MSDC3_DAT3__FUNC_MSDC3_DAT3>;
+ input-enable;
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins_cmd {
+ pinmux = <MT8173_PIN_27_MSDC3_CMD__FUNC_MSDC3_CMD>;
+ input-enable;
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins_clk {
+ pinmux = <MT8173_PIN_26_MSDC3_CLK__FUNC_MSDC3_CLK>;
+ bias-pull-down;
+ drive-strength = <MTK_DRIVE_8mA>;
+ };
+
+ pins_pdn {
+ pinmux = <MT8173_PIN_85_AUD_DAT_MOSI__FUNC_GPIO85>;
+ output-low;
+ };
+ };
+
mmc0_pins_uhs: mmc0 {
pins_cmd_dat {
pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>,
@@ -243,6 +300,31 @@
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
};
};
+
+ mmc3_pins_uhs: mmc3 {
+ pins_dat {
+ pinmux = <MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0>,
+ <MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1>,
+ <MT8173_PIN_24_MSDC3_DAT2__FUNC_MSDC3_DAT2>,
+ <MT8173_PIN_25_MSDC3_DAT3__FUNC_MSDC3_DAT3>;
+ input-enable;
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins_cmd {
+ pinmux = <MT8173_PIN_27_MSDC3_CMD__FUNC_MSDC3_CMD>;
+ input-enable;
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins_clk {
+ pinmux = <MT8173_PIN_26_MSDC3_CLK__FUNC_MSDC3_CLK>;
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+ };
+ };
};
&pwm0 {
--
1.7.9.5
Powered by blists - more mailing lists