lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20161108185831.17683-2-ahaslam@baylibre.com>
Date:   Tue,  8 Nov 2016 19:58:29 +0100
From:   Axel Haslam <ahaslam@...libre.com>
To:     gregkh@...uxfoundation.org, stern@...land.harvard.edu,
        nsekhar@...com, khilman@...nel.org, david@...hnology.com,
        robh+dt@...nel.org
Cc:     linux-usb@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
        Axel Haslam <ahaslam@...libre.com>
Subject: [PATCH 1/3] USB: ohci: da8xx: Add devicetree bindings

This patch documents the device tree bindings required for
the ohci controller found in TI da8xx family of SoC's

Cc: devicetree@...r.kernel.org
Signed-off-by: Axel Haslam <ahaslam@...libre.com>
---
 .../devicetree/bindings/usb/ohci-da8xx.txt         | 39 ++++++++++++++++++++++
 1 file changed, 39 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/ohci-da8xx.txt

diff --git a/Documentation/devicetree/bindings/usb/ohci-da8xx.txt b/Documentation/devicetree/bindings/usb/ohci-da8xx.txt
new file mode 100644
index 0000000..66672e6
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ohci-da8xx.txt
@@ -0,0 +1,39 @@
+DA8XX USB OHCI controller
+
+Required properties:
+
+ - compatible: Should be "ti,da830-ohci"
+ - reg:        Should contain one register range i.e. start and length
+ - interrupts: Description of the interrupt line
+ - phys:       Phandle for the PHY device
+ - phy-names:  Should be "usb-phy"
+
+Optional properties:
+ - vbus-supply: Regulator that controls vbus power
+
+Example:
+
+reg_usb_ohci: regulator@0 {
+        compatible = "regulator-fixed";
+        gpio = <&gpio 109 0>;
+        over-current-gpios = <&gpio 36 0>;
+        regulator-boot-on;
+        enable-active-high;
+        regulator-name = "usb_ohci_vbus";
+        regulator-min-microvolt = <5000000>;
+        regulator-max-microvolt = <5000000>;
+};
+
+usb_phy: usb-phy {
+        compatible = "ti,da830-usb-phy";
+        #phy-cells = <1>;
+};
+
+ohci: usb@...5000 {
+        compatible = "ti,da830-ohci";
+        reg = <0x225000 0x1000>;
+        interrupts = <59>;
+        phys = <&usb_phy 1>;
+        phy-names = "usb-phy";
+        vbus-supply = <&reg_usb_ohci>;
+};
-- 
2.10.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ