linux-kernel - [PATCH 3/3] ARM: dts: da850: add usb device node

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20161108185831.17683-4-ahaslam@baylibre.com>
Date:   Tue,  8 Nov 2016 19:58:31 +0100
From:   Axel Haslam <ahaslam@...libre.com>
To:     gregkh@...uxfoundation.org, stern@...land.harvard.edu,
        nsekhar@...com, khilman@...nel.org, david@...hnology.com,
        robh+dt@...nel.org
Cc:     linux-usb@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
        Axel Haslam <ahaslam@...libre.com>
Subject: [PATCH 3/3] ARM: dts: da850: add usb device node

This adds the ohci device node for the da850 soc.
It also enables it for the omapl138 hawk board.

Signed-off-by: Axel Haslam <ahaslam@...libre.com>
---
 arch/arm/boot/dts/da850-lcdk.dts | 8 ++++++++
 arch/arm/boot/dts/da850.dtsi     | 8 ++++++++
 2 files changed, 16 insertions(+)

diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts
index 7b8ab21..aaf533e 100644
--- a/arch/arm/boot/dts/da850-lcdk.dts
+++ b/arch/arm/boot/dts/da850-lcdk.dts
@@ -86,6 +86,14 @@
 	};
 };
 
+&usb_phy {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
 &serial2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&serial2_rxtx_pins>;
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index 2534aab..c74f1a6 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -405,6 +405,14 @@
 					>;
 			status = "disabled";
 		};
+		ohci: usb@...000 {
+			compatible = "ti,da830-ohci";
+			reg = <0x225000 0x1000>;
+			interrupts = <59>;
+			phys = <&usb_phy 1>;
+			phy-names = "usb-phy";
+			status = "disabled";
+		};
 		gpio: gpio@...000 {
 			compatible = "ti,dm6441-gpio";
 			gpio-controller;
-- 
2.10.1