lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Date:   Wed,  9 Nov 2016 04:33:08 -0500
From:   Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@...adcom.com>
To:     Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Russell King <linux@...linux.org.uk>,
        Ray Jui <rjui@...adcom.com>,
        Scott Branden <sbranden@...adcom.com>,
        Jon Mason <jonmason@...adcom.com>,
        Florian Fainelli <f.fainelli@...il.com>,
        Kishon Vijay Abraham I <kishon@...com>
Cc:     bcm-kernel-feedback-list@...adcom.com, netdev@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org,
        Yendapally Reddy Dhananjaya Reddy 
        <yendapally.reddy@...adcom.com>
Subject: [PATCH 0/6] USB support for Broadcom NSP SoC 

This patch set contains the usb support for Broadcom NSP SoC.
The usb phy is connected through mdio interface. The mdio interface
can be used to access either internal phys or external phys using a
multiplexer.

The first patch provides the documentation details for mdio-mux and
second patch provides the documentation details for usb3 phy. The third
patch contains the mdio-mux support and fourth patch contains the
changes to the mdio bus driver.

The fifth patch provides the phy driver and sixth patch provides the
enable method for usb.

This patch series has been tested on NSP bcm958625HR board.
This patch series is based on v4.9.0-rc1 and is available from github-
repo: https://github.com/Broadcom/cygnus-linux.git
branch:nsp-usb-v1


Yendapally Reddy Dhananjaya Reddy (6):
  dt-bindings: mdio-mux: Add documentation for mdio mux for NSP SoC
  dt-bindings: phy: Add documentation for NSP USB3 PHY
  net: mdio-mux: Add MDIO mux driver for NSP SoC
  net: phy: Initialize mdio clock at probe function
  phy: Add USB3 PHY support for Broadcom NSP SoC
  arm: dts: nsp: Add USB nodes to device tree

 .../devicetree/bindings/net/brcm,mdio-mux-nsp.txt  |  57 +++++++
 .../devicetree/bindings/phy/brcm,nsp-usb3-phy.txt  |  39 +++++
 arch/arm/boot/dts/bcm-nsp.dtsi                     |  57 +++++++
 arch/arm/boot/dts/bcm958625k.dts                   |  16 ++
 drivers/net/phy/Kconfig                            |   9 ++
 drivers/net/phy/Makefile                           |   1 +
 drivers/net/phy/mdio-bcm-iproc.c                   |   6 +-
 drivers/net/phy/mdio-mux-bcm-nsp.c                 | 121 ++++++++++++++
 drivers/phy/Kconfig                                |   9 ++
 drivers/phy/Makefile                               |   1 +
 drivers/phy/phy-bcm-nsp-usb3.c                     | 176 +++++++++++++++++++++
 11 files changed, 488 insertions(+), 4 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/brcm,mdio-mux-nsp.txt
 create mode 100644 Documentation/devicetree/bindings/phy/brcm,nsp-usb3-phy.txt
 create mode 100644 drivers/net/phy/mdio-mux-bcm-nsp.c
 create mode 100644 drivers/phy/phy-bcm-nsp-usb3.c

-- 
2.1.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ