linux-kernel - [PATCH V4 9/9] PM / OPP: Don't assume platform doesn't have regulators

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Thu, 10 Nov 2016 10:46:28 +0530
From:   Viresh Kumar <viresh.kumar@...aro.org>
To:     Rafael Wysocki <rjw@...ysocki.net>,
        Viresh Kumar <vireshk@...nel.org>, Nishanth Menon <nm@...com>,
        Stephen Boyd <sboyd@...eaurora.org>
Cc:     linaro-kernel@...ts.linaro.org, linux-pm@...r.kernel.org,
        linux-kernel@...r.kernel.org, broonie@...nel.org,
        Vincent Guittot <vincent.guittot@...aro.org>,
        Viresh Kumar <viresh.kumar@...aro.org>
Subject: [PATCH V4 9/9] PM / OPP: Don't assume platform doesn't have regulators

If the regulators aren't set explicitly by the platform, the OPP core
assumes that the platform doesn't have any regulator and uses the
clk-only callback.

If the platform failed to register a regulator with the core, then this
can turn out to be a dangerous assumption as the OPP core will try to
change clk without changing regulators.

Handle that properly by making sure that the DT didn't have any entries
for supply voltages as well.

Signed-off-by: Viresh Kumar <viresh.kumar@...aro.org>
---
V4:
- s/had/have
- fix missing rcu_read_unlock()

 drivers/base/power/opp/core.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/base/power/opp/core.c b/drivers/base/power/opp/core.c
index 3298fac01bb0..cb33f8b2b56d 100644
--- a/drivers/base/power/opp/core.c
+++ b/drivers/base/power/opp/core.c
@@ -734,7 +734,20 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
 
 	/* Only frequency scaling */
 	if (!regulators) {
+		unsigned long u_volt = opp->supplies[0].u_volt;
+
 		rcu_read_unlock();
+
+		/*
+		 * DT contained supply ratings? Consider platform failed to set
+		 * regulators.
+		 */
+		if (unlikely(u_volt)) {
+			dev_err(dev, "%s: Regulator not registered with OPP core\n",
+				__func__);
+			return -EINVAL;
+		}
+
 		return _generic_set_opp_clk_only(dev, clk, old_freq, freq);
 	}
 
-- 
2.7.1.410.g6faf27b