linux-kernel - Re: [PATCH v2] video: backlight: pwm_bl: Initialize fb_bl_on[x] and use_count during pwm_backlight

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20161110081641.GP13127@dell>
Date:   Thu, 10 Nov 2016 08:16:41 +0000
From:   Lee Jones <lee.jones@...aro.org>
To:     Lukasz Majewski <l.majewski@...ess.pl>
Cc:     Thierry Reding <thierry.reding@...il.com>,
        Jean-Christophe Plagniol-Villard <plagnioj@...osoft.com>,
        Tomi Valkeinen <tomi.valkeinen@...com>,
        linux-pwm@...r.kernel.org, linux-kernel@...r.kernel.org,
        Fabio Estevam <fabio.estevam@....com>,
        Fabio Estevam <festevam@...il.com>,
        linux-fbdev@...r.kernel.org, Liu Ying <Ying.Liu@...escale.com>,
        jingoohan1@...il.com
Subject: Re: [PATCH v2] video: backlight: pwm_bl: Initialize fb_bl_on[x] and
 use_count during pwm_backlight_probe()

Adding Jingoo.

On Tue, 01 Nov 2016, Lukasz Majewski wrote:
> The commit a55944ca82d2 ("backlight: update bd state & fb_blank properties
> when necessary") has posed some extra restrictions on blanking and 
> unblanking frame buffer device.
> 
> Unfortunately, pwm_bl driver's probe did not initialize members of
> struct backlight_device necessary for further blank/unblank operation.
> 
> This code in case of initial unblank of backlight device (default 
> behaviour) sets use_count to 1 and marks this particular backlight device
> as used by all available fb devices (since it is not known during probe 
> how much and which fb devices will be assigned).
> 
> Without this code, the backlight works properly until one tries to blank
> it manually from sysfs with "echo 1 > /sys/class/graphics/fb0/blank".
> Since fb_bl_on[0] and use_count were both set to 0, the logic at
> fb_notifier_callback (@backlight.c) thought that we didn't turn on
> (unblanked) the backlight device and refuses to disable (blank) it.
> As a result we see garbage from fb displayed.
> 
> Signed-off-by: Lukasz Majewski <l.majewski@...ess.pl>
> ---
> The patch has been tested on i.MX6q with 4.9-rc3
> SHA1: a909d3e636995ba7c349e2ca5dbb528154d4ac30
> ---
> Changes for v2:
> - Update commit message with proper other commit reference
> 
> ---
>  drivers/video/backlight/pwm_bl.c | 10 +++++++++-
>  1 file changed, 9 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c
> index 1261400..6859ba0 100644
> --- a/drivers/video/backlight/pwm_bl.c
> +++ b/drivers/video/backlight/pwm_bl.c
> @@ -202,7 +202,7 @@ static int pwm_backlight_probe(struct platform_device *pdev)
>  	struct pwm_bl_data *pb;
>  	int initial_blank = FB_BLANK_UNBLANK;
>  	struct pwm_args pargs;
> -	int ret;
> +	int ret, i;
>  
>  	if (!data) {
>  		ret = pwm_backlight_parse_dt(&pdev->dev, &defdata);
> @@ -348,6 +348,14 @@ static int pwm_backlight_probe(struct platform_device *pdev)
>  
>  	bl->props.brightness = data->dft_brightness;
>  	bl->props.power = initial_blank;
> +
> +	if (initial_blank == FB_BLANK_UNBLANK) {
> +		for (i = 0; i < FB_MAX; i++)
> +			bl->fb_bl_on[i] = true;
> +
> +		bl->use_count = 1;
> +	}
> +
>  	backlight_update_status(bl);
>  
>  	platform_set_drvdata(pdev, bl);

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog