Message-ID: <9ba617f4-fd3d-2b48-2607-9eec3cc4253a@kernel.org>
Date:   Sat, 12 Nov 2016 17:08:39 +0000
From:   Jonathan Cameron <jic23@...nel.org>
To:     Fabrice Gasnier <fabrice.gasnier@...com>,
        linux-iio@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Cc:     lee.jones@...aro.org, linux@...linux.org.uk, robh+dt@...nel.org,
        mark.rutland@....com, mcoquelin.stm32@...il.com,
        alexandre.torgue@...com, lars@...afoo.de, knaack.h@....de,
        pmeerw@...erw.net
Subject: Re: [PATCH v2 2/6] mfd: stm32-adc: Add support for stm32 ADC

On 10/11/16 16:18, Fabrice Gasnier wrote:
> Add core driver for STMicroelectronics STM32 ADC (Analog to Digital
> Converter). STM32 ADC can be composed of up to 3 ADCs with shared
> resources like clock prescaler, common interrupt line and analog
> reference voltage.
> This core driver basically manages shared resources.
> 
> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@...com>
Looks good to me (other than the build issue obviously ;)

The fun bit will be trying to keep the whole thing this clean as you
add the more 'interesting' functionality.  *fingers crossed*

Acked-by: Jonathan Cameron <jic23@...nel.org>
> ---
>  drivers/mfd/Kconfig                |  14 ++
>  drivers/mfd/Makefile               |   1 +
>  drivers/mfd/stm32-adc-core.c       | 301 +++++++++++++++++++++++++++++++++++++
>  include/linux/mfd/stm32-adc-core.h |  52 +++++++
>  4 files changed, 368 insertions(+)
>  create mode 100644 drivers/mfd/stm32-adc-core.c
>  create mode 100644 include/linux/mfd/stm32-adc-core.h
> 
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index c6df644..2580cee 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -1152,6 +1152,20 @@ config MFD_PALMAS
>  	  If you say yes here you get support for the Palmas
>  	  series of PMIC chips from Texas Instruments.
>  
> +config MFD_STM32_ADC
> +	tristate "STMicroelectronics STM32 adc"
> +	depends on ARCH_STM32 || COMPILE_TEST
> +	depends on OF
> +	select MFD_CORE
> +	select REGULATOR
> +	select REGULATOR_FIXED_VOLTAGE
> +	help
> +	  Select this option to enable the core driver for STMicroelectronics
> +	  STM32 analog-to-digital converter (ADC).
> +
> +	  This driver can also be built as a module.  If so, the module
> +	  will be called stm32-adc-core.
> +
>  config TPS6105X
>  	tristate "TI TPS61050/61052 Boost Converters"
>  	depends on I2C
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 9834e66..4571506 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -185,6 +185,7 @@ obj-$(CONFIG_MFD_INTEL_LPSS_PCI)	+= intel-lpss-pci.o
>  obj-$(CONFIG_MFD_INTEL_LPSS_ACPI)	+= intel-lpss-acpi.o
>  obj-$(CONFIG_MFD_INTEL_MSIC)	+= intel_msic.o
>  obj-$(CONFIG_MFD_PALMAS)	+= palmas.o
> +obj-$(CONFIG_MFD_STM32_ADC) 	+= stm32-adc-core.o
>  obj-$(CONFIG_MFD_VIPERBOARD)    += viperboard.o
>  obj-$(CONFIG_MFD_RC5T583)	+= rc5t583.o rc5t583-irq.o
>  obj-$(CONFIG_MFD_RK808)		+= rk808.o
> diff --git a/drivers/mfd/stm32-adc-core.c b/drivers/mfd/stm32-adc-core.c
> new file mode 100644
> index 0000000..bcf52fb
> --- /dev/null
> +++ b/drivers/mfd/stm32-adc-core.c
> @@ -0,0 +1,301 @@
> +/*
> + * This file is part of STM32 ADC driver
> + *
> + * Copyright (C) 2016, STMicroelectronics - All Rights Reserved
> + * Author: Fabrice Gasnier <fabrice.gasnier@...com>.
> + *
> + * Inspired from: fsl-imx25-tsadc
> + *
> + * License type: GPLv2
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
> + * or FITNESS FOR A PARTICULAR PURPOSE.
> + * See the GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/interrupt.h>
> +#include <linux/irqchip/chained_irq.h>
> +#include <linux/irqdesc.h>
> +#include <linux/irqdomain.h>
> +#include <linux/mfd/stm32-adc-core.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/slab.h>
> +
> +/* STM32F4 - common registers for all ADC instances: 1, 2 & 3 */
> +#define STM32F4_ADC_CSR			(STM32_ADCX_COMN_OFFSET + 0x00)
> +#define STM32F4_ADC_CCR			(STM32_ADCX_COMN_OFFSET + 0x04)
> +
> +/* STM32F4_ADC_CSR - bit fields */
> +#define STM32F4_EOC3			BIT(17)
> +#define STM32F4_EOC2			BIT(9)
> +#define STM32F4_EOC1			BIT(1)
> +
> +/* STM32F4_ADC_CCR - bit fields */
> +#define STM32F4_ADC_ADCPRE_SHIFT	16
> +#define STM32F4_ADC_ADCPRE_MASK		GENMASK(17, 16)
> +
> +/* STM32 F4 maximum analog clock rate (from datasheet) */
> +#define STM32F4_ADC_MAX_CLK_RATE	36000000
> +
> +/**
> + * struct stm32_adc_priv - stm32 ADC core private data
> + * @irq:		irq for ADC block
> + * @domain:		irq domain reference
> + * @aclk:		clock reference for the analog circuitry
> + * @vref:		regulator reference
> + * @common:		common data for all ADC instances
> + */
> +struct stm32_adc_priv {
> +	int				irq;
> +	struct irq_domain		*domain;
> +	struct clk			*aclk;
> +	struct regulator		*vref;
> +	struct stm32_adc_common		common;
> +};
> +
> +static struct stm32_adc_priv *to_stm32_adc_priv(struct stm32_adc_common *com)
> +{
> +	return container_of(com, struct stm32_adc_priv, common);
> +}
> +
> +/* STM32F4 ADC internal common clock prescaler division ratios */
> +static int stm32f4_pclk_div[] = {2, 4, 6, 8};
> +
> +/**
> + * stm32f4_adc_clk_sel() - Select stm32f4 ADC common clock prescaler
> + * @priv: stm32 ADC core private data
> + * Select clock prescaler used for analog conversions, before using ADC.
> + */
> +static int stm32f4_adc_clk_sel(struct platform_device *pdev,
> +			       struct stm32_adc_priv *priv)
> +{
> +	unsigned long rate;
> +	u32 val;
> +	int i;
> +
> +	rate = clk_get_rate(priv->aclk);
> +	for (i = 0; i < ARRAY_SIZE(stm32f4_pclk_div); i++) {
> +		if ((rate / stm32f4_pclk_div[i]) <= STM32F4_ADC_MAX_CLK_RATE)
> +			break;
> +	}
> +	if (i >= ARRAY_SIZE(stm32f4_pclk_div))
> +		return -EINVAL;
> +
> +	val = readl_relaxed(priv->common.base + STM32F4_ADC_CCR);
> +	val &= ~STM32F4_ADC_ADCPRE_MASK;
> +	val |= i << STM32F4_ADC_ADCPRE_SHIFT;
> +	writel_relaxed(val, priv->common.base + STM32F4_ADC_CCR);
> +
> +	dev_dbg(&pdev->dev, "Using analog clock source at %ld kHz\n",
> +		rate / (stm32f4_pclk_div[i] * 1000));
> +
> +	return 0;
> +}
> +
> +/* ADC common interrupt for all instances */
> +static void stm32_adc_irq_handler(struct irq_desc *desc)
> +{
> +	struct stm32_adc_priv *priv = irq_desc_get_handler_data(desc);
> +	struct irq_chip *chip = irq_desc_get_chip(desc);
> +	u32 status;
> +
> +	chained_irq_enter(chip, desc);
> +	status = readl_relaxed(priv->common.base + STM32F4_ADC_CSR);
> +
> +	if (status & STM32F4_EOC1)
> +		generic_handle_irq(irq_find_mapping(priv->domain, 0));
> +
> +	if (status & STM32F4_EOC2)
> +		generic_handle_irq(irq_find_mapping(priv->domain, 1));
> +
> +	if (status & STM32F4_EOC3)
> +		generic_handle_irq(irq_find_mapping(priv->domain, 2));
> +
> +	chained_irq_exit(chip, desc);
> +};
> +
> +static int stm32_adc_domain_map(struct irq_domain *d, unsigned int irq,
> +				irq_hw_number_t hwirq)
> +{
> +	irq_set_chip_data(irq, d->host_data);
> +	irq_set_chip_and_handler(irq, &dummy_irq_chip, handle_level_irq);
> +
> +	return 0;
> +}
> +
> +static void stm32_adc_domain_unmap(struct irq_domain *d, unsigned int irq)
> +{
> +	irq_set_chip_and_handler(irq, NULL, NULL);
> +	irq_set_chip_data(irq, NULL);
> +}
> +
> +static const struct irq_domain_ops stm32_adc_domain_ops = {
> +	.map = stm32_adc_domain_map,
> +	.unmap  = stm32_adc_domain_unmap,
> +	.xlate = irq_domain_xlate_onecell,
> +};
> +
> +static int stm32_adc_irq_probe(struct platform_device *pdev,
> +			       struct stm32_adc_priv *priv)
> +{
> +	struct device_node *np = pdev->dev.of_node;
> +
> +	priv->irq = platform_get_irq(pdev, 0);
> +	if (priv->irq < 0) {
> +		dev_err(&pdev->dev, "failed to get irq\n");
> +		return priv->irq;
> +	}
> +
> +	priv->domain = irq_domain_add_simple(np, STM32_ADC_MAX_ADCS, 0,
> +					     &stm32_adc_domain_ops,
> +					     priv);
> +	if (!priv->domain) {
> +		dev_err(&pdev->dev, "Failed to add irq domain\n");
> +		return -ENOMEM;
> +	}
> +
> +	irq_set_chained_handler(priv->irq, stm32_adc_irq_handler);
> +	irq_set_handler_data(priv->irq, priv);
> +
> +	return 0;
> +}
> +
> +static void stm32_adc_irq_remove(struct platform_device *pdev,
> +				 struct stm32_adc_priv *priv)
> +{
> +	int hwirq;
> +
> +	for (hwirq = 0; hwirq < STM32_ADC_MAX_ADCS; hwirq++)
> +		irq_dispose_mapping(irq_find_mapping(priv->domain, hwirq));
> +	irq_domain_remove(priv->domain);
> +	irq_set_chained_handler(priv->irq, NULL);
> +}
> +
> +static int stm32_adc_probe(struct platform_device *pdev)
> +{
> +	struct stm32_adc_priv *priv;
> +	struct device_node *np = pdev->dev.of_node;
> +	struct resource *res;
> +	int ret;
> +
> +	if (!pdev->dev.of_node)
> +		return -ENODEV;
> +
> +	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
> +	if (!priv)
> +		return -ENOMEM;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	priv->common.base = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(priv->common.base))
> +		return PTR_ERR(priv->common.base);
> +
> +	priv->vref = devm_regulator_get(&pdev->dev, "vref");
> +	if (IS_ERR(priv->vref)) {
> +		ret = PTR_ERR(priv->vref);
> +		dev_err(&pdev->dev, "vref get failed, %d\n", ret);
> +		return ret;
> +	}
> +
> +	ret = regulator_enable(priv->vref);
> +	if (ret < 0) {
> +		dev_err(&pdev->dev, "vref enable failed\n");
> +		return ret;
> +	}
> +
> +	ret = regulator_get_voltage(priv->vref);
> +	if (ret < 0) {
> +		dev_err(&pdev->dev, "vref get voltage failed, %d\n", ret);
> +		goto err_regulator_disable;
> +	}
> +	priv->common.vref_mv = ret / 1000;
> +	dev_dbg(&pdev->dev, "vref+=%dmV\n", priv->common.vref_mv);
> +
> +	priv->aclk = devm_clk_get(&pdev->dev, "adc");
> +	if (IS_ERR(priv->aclk)) {
> +		ret = PTR_ERR(priv->aclk);
> +		dev_err(&pdev->dev, "Can't get 'adc' clock\n");
> +		goto err_regulator_disable;
> +	}
> +
> +	ret = clk_prepare_enable(priv->aclk);
> +	if (ret < 0) {
> +		dev_err(&pdev->dev, "adc clk enable failed\n");
> +		goto err_regulator_disable;
> +	}
> +
> +	ret = stm32f4_adc_clk_sel(pdev, priv);
> +	if (ret < 0) {
> +		dev_err(&pdev->dev, "adc clk selection failed\n");
> +		goto err_clk_disable;
> +	}
> +
> +	ret = stm32_adc_irq_probe(pdev, priv);
> +	if (ret < 0)
> +		goto err_clk_disable;
> +
> +	platform_set_drvdata(pdev, &priv->common);
> +
> +	ret = of_platform_populate(np, NULL, NULL, &pdev->dev);
> +	if (ret < 0) {
> +		dev_err(&pdev->dev, "failed to populate DT children\n");
> +		goto err_irq_remove;
> +	}
> +
> +	return 0;
> +
> +err_irq_remove:
> +	stm32_adc_irq_remove(pdev, priv);
> +
> +err_clk_disable:
> +	clk_disable_unprepare(priv->aclk);
> +
> +err_regulator_disable:
> +	regulator_disable(priv->vref);
> +
> +	return ret;
> +}
> +
> +static int stm32_adc_remove(struct platform_device *pdev)
> +{
> +	struct stm32_adc_common *common = platform_get_drvdata(pdev);
> +	struct stm32_adc_priv *priv = to_stm32_adc_priv(common);
> +
> +	of_platform_depopulate(&pdev->dev);
> +	stm32_adc_irq_remove(pdev, priv);
> +	clk_disable_unprepare(priv->aclk);
> +	regulator_disable(priv->vref);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id stm32_adc_of_match[] = {
> +	{ .compatible = "st,stm32f4-adc-core" },
> +};
> +MODULE_DEVICE_TABLE(of, stm32_adc_of_match);
> +
> +static struct platform_driver stm32_adc_driver = {
> +	.probe = stm32_adc_probe,
> +	.remove = stm32_adc_remove,
> +	.driver = {
> +		.name = "stm32-adc-core",
> +		.of_match_table = stm32_adc_of_match,
> +	},
> +};
> +module_platform_driver(stm32_adc_driver);
> +
> +MODULE_AUTHOR("Fabrice Gasnier <fabrice.gasnier@...com>");
> +MODULE_DESCRIPTION("STMicroelectronics STM32 ADC MFD driver");
> +MODULE_LICENSE("GPL v2");
> +MODULE_ALIAS("platform:stm32-adc-core");
> diff --git a/include/linux/mfd/stm32-adc-core.h b/include/linux/mfd/stm32-adc-core.h
> new file mode 100644
> index 0000000..081fa5f
> --- /dev/null
> +++ b/include/linux/mfd/stm32-adc-core.h
> @@ -0,0 +1,52 @@
> +/*
> + * This file is part of STM32 ADC driver
> + *
> + * Copyright (C) 2016, STMicroelectronics - All Rights Reserved
> + * Author: Fabrice Gasnier <fabrice.gasnier@...com>.
> + *
> + * License type: GPLv2
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
> + * or FITNESS FOR A PARTICULAR PURPOSE.
> + * See the GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#ifndef __STM32_ADC_H
> +#define __STM32_ADC_H
> +
> +/*
> + * STM32 - ADC global register map
> + * ________________________________________________________
> + * | Offset |                 Register                    |
> + * --------------------------------------------------------
> + * | 0x000  |                Master ADC1                  |
> + * --------------------------------------------------------
> + * | 0x100  |                Slave ADC2                   |
> + * --------------------------------------------------------
> + * | 0x200  |                Slave ADC3                   |
> + * --------------------------------------------------------
> + * | 0x300  |         Master & Slave common regs          |
> + * --------------------------------------------------------
> + */
> +#define STM32_ADC_MAX_ADCS		3
> +#define STM32_ADCX_COMN_OFFSET		0x300
> +
> +/**
> + * struct stm32_adc_common - stm32 ADC driver common data (for all instances)
> + * @base:		control registers base cpu addr
> + * @vref_mv:		vref voltage (mv)
> + */
> +struct stm32_adc_common {
> +	void __iomem			*base;
> +	int				vref_mv;
> +};
> +
> +#endif
> 

Powered by blists - more mailing lists