| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sun, 13 Nov 2016 18:12:09 +0000
From: Stefan Wahren <stefan.wahren@...e.com>
To: Stephen Warren <swarren@...dotorg.org>,
Eric Anholt <eric@...olt.net>, Lee Jones <lee@...nel.org>,
Linus Walleij <linus.walleij@...aro.org>
Cc: Gottfried Haider <gottfried.haider@...il.com>,
linux-kernel@...r.kernel.org,
bcm-kernel-feedback-list@...adcom.com,
linux-arm-kernel@...ts.infradead.org,
linux-rpi-kernel@...ts.infradead.org,
Stefan Wahren <stefan.wahren@...e.com>
Subject: [PATCH 2/2] ARM: bcm2835: Add names for the Raspberry Pi Zero GPIO lines
This adds the GPIO names for the Raspberry Pi Zero. Since there are no
schematics for the RPi Zero use the same as the Model A+.
Signed-off-by: Stefan Wahren <stefan.wahren@...e.com>
---
arch/arm/boot/dts/bcm2835-rpi-a-plus-gpio.dtsi | 75 +++++++++++++++++++++++
arch/arm/boot/dts/bcm2835-rpi-a-plus.dts | 76 +-----------------------
arch/arm/boot/dts/bcm2835-rpi-zero.dts | 11 +---
3 files changed, 77 insertions(+), 85 deletions(-)
create mode 100644 arch/arm/boot/dts/bcm2835-rpi-a-plus-gpio.dtsi
diff --git a/arch/arm/boot/dts/bcm2835-rpi-a-plus-gpio.dtsi b/arch/arm/boot/dts/bcm2835-rpi-a-plus-gpio.dtsi
new file mode 100644
index 0000000..741d64d
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2835-rpi-a-plus-gpio.dtsi
@@ -0,0 +1,75 @@
+&gpio {
+ /*
+ * This is based on the unreleased schematic for the Model A+.
+ *
+ * Legend:
+ * "NC" = not connected (no rail from the SoC)
+ * "FOO" = GPIO line named "FOO" on the schematic
+ * "FOO_N" = GPIO line named "FOO" on schematic, active low
+ */
+ gpio-line-names = "SDA0",
+ "SCL0",
+ "SDA1",
+ "SCL1",
+ "GPIO_GCLK",
+ "GPIO5",
+ "GPIO6",
+ "SPI_CE1_N",
+ "SPI_CE0_N",
+ "SPI_MISO",
+ "SPI_MOSI",
+ "SPI_SCLK",
+ "GPIO12",
+ "GPIO13",
+ /* Serial port */
+ "TXD0",
+ "RXD0",
+ "GPIO16",
+ "GPIO17",
+ "GPIO18",
+ "GPIO19",
+ "GPIO20",
+ "GPIO21",
+ "GPIO22",
+ "GPIO23",
+ "GPIO24",
+ "GPIO25",
+ "GPIO26",
+ "GPIO27",
+ "SDA0",
+ "SCL0",
+ "NC", /* GPIO30 */
+ "NC", /* GPIO31 */
+ "CAM_GPIO1", /* GPIO32 */
+ "NC", /* GPIO33 */
+ "NC", /* GPIO34 */
+ "PWR_LOW_N", /* GPIO35 */
+ "NC", /* GPIO36 */
+ "NC", /* GPIO37 */
+ "USB_LIMIT", /* GPIO38 */
+ "NC", /* GPIO39 */
+ "PWM0_OUT", /* GPIO40 */
+ "CAM_GPIO0", /* GPIO41 */
+ "NC", /* GPIO42 */
+ "NC", /* GPIO43 */
+ "NC", /* GPIO44 */
+ "PWM1_OUT", /* GPIO45 */
+ "HDMI_HPD_N",
+ "STATUS_LED",
+ /* Used by SD Card */
+ "SD_CLK_R",
+ "SD_CMD_R",
+ "SD_DATA0_R",
+ "SD_DATA1_R",
+ "SD_DATA2_R",
+ "SD_DATA3_R";
+
+ pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
+
+ /* I2S interface */
+ i2s_alt0: i2s_alt0 {
+ brcm,pins = <18 19 20 21>;
+ brcm,function = <BCM2835_FSEL_ALT0>;
+ };
+};
+
diff --git a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
index d070454..9b665da 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
@@ -2,6 +2,7 @@
#include "bcm2835.dtsi"
#include "bcm2835-rpi.dtsi"
#include "bcm283x-rpi-usb-host.dtsi"
+#include "bcm2835-rpi-a-plus-gpio.dtsi"
/ {
compatible = "raspberrypi,model-a-plus", "brcm,bcm2835";
@@ -21,81 +22,6 @@
};
};
-&gpio {
- /*
- * This is based on the unreleased schematic for the Model A+.
- *
- * Legend:
- * "NC" = not connected (no rail from the SoC)
- * "FOO" = GPIO line named "FOO" on the schematic
- * "FOO_N" = GPIO line named "FOO" on schematic, active low
- */
- gpio-line-names = "SDA0",
- "SCL0",
- "SDA1",
- "SCL1",
- "GPIO_GCLK",
- "GPIO5",
- "GPIO6",
- "SPI_CE1_N",
- "SPI_CE0_N",
- "SPI_MISO",
- "SPI_MOSI",
- "SPI_SCLK",
- "GPIO12",
- "GPIO13",
- /* Serial port */
- "TXD0",
- "RXD0",
- "GPIO16",
- "GPIO17",
- "GPIO18",
- "GPIO19",
- "GPIO20",
- "GPIO21",
- "GPIO22",
- "GPIO23",
- "GPIO24",
- "GPIO25",
- "GPIO26",
- "GPIO27",
- "SDA0",
- "SCL0",
- "NC", /* GPIO30 */
- "NC", /* GPIO31 */
- "CAM_GPIO1", /* GPIO32 */
- "NC", /* GPIO33 */
- "NC", /* GPIO34 */
- "PWR_LOW_N", /* GPIO35 */
- "NC", /* GPIO36 */
- "NC", /* GPIO37 */
- "USB_LIMIT", /* GPIO38 */
- "NC", /* GPIO39 */
- "PWM0_OUT", /* GPIO40 */
- "CAM_GPIO0", /* GPIO41 */
- "NC", /* GPIO42 */
- "NC", /* GPIO43 */
- "NC", /* GPIO44 */
- "PWM1_OUT", /* GPIO45 */
- "HDMI_HPD_N",
- "STATUS_LED",
- /* Used by SD Card */
- "SD_CLK_R",
- "SD_CMD_R",
- "SD_DATA0_R",
- "SD_DATA1_R",
- "SD_DATA2_R",
- "SD_DATA3_R";
-
- pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
-
- /* I2S interface */
- i2s_alt0: i2s_alt0 {
- brcm,pins = <18 19 20 21>;
- brcm,function = <BCM2835_FSEL_ALT0>;
- };
-};
-
&hdmi {
hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero.dts b/arch/arm/boot/dts/bcm2835-rpi-zero.dts
index 7c1c180..0154ae0 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-zero.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-zero.dts
@@ -13,6 +13,7 @@
#include "bcm2835.dtsi"
#include "bcm2835-rpi.dtsi"
#include "bcm283x-rpi-usb-host.dtsi"
+#include "bcm2835-rpi-a-plus-gpio.dtsi"
/ {
compatible = "raspberrypi,model-zero", "brcm,bcm2835";
@@ -25,16 +26,6 @@
};
};
-&gpio {
- pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
-
- /* I2S interface */
- i2s_alt0: i2s_alt0 {
- brcm,pins = <18 19 20 21>;
- brcm,function = <BCM2835_FSEL_ALT0>;
- };
-};
-
&hdmi {
hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
};
--
1.7.9.5
Powered by blists - more mailing lists