| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1479101215-26954-2-git-send-email-sriram.dash@nxp.com>
Date: Mon, 14 Nov 2016 10:56:54 +0530
From: Sriram Dash <sriram.dash@....com>
To: <linux-kernel@...r.kernel.org>, <linux-usb@...r.kernel.org>,
<devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>
CC: <robh+dt@...nel.org>, <mark.rutland@....com>, <kishon@...com>,
<catalin.marinas@....com>, <will.deacon@....com>,
<stern@...land.harvard.edu>, <pku.leo@...il.com>,
<mathias.nyman@...el.com>, <gregkh@...uxfoundation.org>,
<suresh.gupta@....com>, <felipe.balbi@...ux.intel.com>,
Sriram Dash <sriram.dash@....com>
Subject: [PATCH 1/2] drivers: usb: phy: Add qoriq usb 3.0 phy driver support
Adds qoriq usb 3.0 phy driver support for LS1043A platform.
Describes the qoriq usb 2.0 phy driver binding, currently used
for LS1043A platform.
Signed-off-by: Sriram Dash <sriram.dash@....com>
---
.../devicetree/bindings/phy/phy-qoriq-usb3.txt | 36 ++++
drivers/phy/Kconfig | 8 +
drivers/phy/Makefile | 1 +
drivers/phy/phy-qoriq-usb3.c | 202 +++++++++++++++++++++
4 files changed, 247 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/phy-qoriq-usb3.txt
create mode 100644 drivers/phy/phy-qoriq-usb3.c
diff --git a/Documentation/devicetree/bindings/phy/phy-qoriq-usb3.txt b/Documentation/devicetree/bindings/phy/phy-qoriq-usb3.txt
new file mode 100644
index 0000000..d934c80
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-qoriq-usb3.txt
@@ -0,0 +1,36 @@
+Driver for Freescale USB 3.0 PHY
+
+Required properties:
+
+- compatible : fsl,qoriq-usb3-phy
+- reg : register mappings for Parameter Configuration Register
+ and Phy base offset.
+- reg-names : "param_ctrl" and "phy_base"
+- phy_type : For multi port host USB controllers, should be one of
+ "ulpi", or "serial". For dual role USB controllers,
+ should be one of "ulpi", "utmi", "utmi_wide", or "serial".
+
+Example:
+ usbphy0: usb3-phy@...F0000 {
+ compatible = "fsl,qoriq-usb3-phy";
+ reg = <0x0 0x01570070 0x0 0xC>, <0x0 0x084F0000 0x0 0x5000>;
+ reg-names = "param_ctrl", "phy_base";
+ #phy-cells = <0>;
+ phy_type = "utmi";
+ };
+
+ usbphy1: usb3-phy@...00000 {
+ compatible = "fsl,qoriq-usb3-phy";
+ reg = <0x0 0x0157007C 0x0 0xC>, <0x0 0x08500000 0x0 0x5000>;
+ reg-names = "param_ctrl", "phy_base";
+ #phy-cells = <0>;
+ phy_type = "utmi";
+ };
+
+ usbphy2: usb3-phy@...10000 {
+ compatible = "fsl,qoriq-usb3-phy";
+ reg = <0x0 0x01570088 0x0 0xC>, <0x0 0x08510000 0x0 0x5000>;
+ reg-names = "param_ctrl", "phy_base";
+ #phy-cells = <0>;
+ phy_type = "utmi";
+ };
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index fe00f91..4caa91c 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -489,4 +489,12 @@ config PHY_NS2_PCIE
help
Enable this to support the Broadcom Northstar2 PCIe PHY.
If unsure, say N.
+
+config PHY_QORIQ_USB3
+ tristate "Freescale QorIQ USB 3.0 PHY driver"
+ depends on ARCH_LAYERSCAPE
+ depends on OF
+ select GENERIC_PHY
+ help
+ Enable this to support the USB3.0 PHY on the QorIQ SoC.
endmenu
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index a534cf5..a47ee36b 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -60,3 +60,4 @@ obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o
obj-$(CONFIG_PHY_CYGNUS_PCIE) += phy-bcm-cygnus-pcie.o
obj-$(CONFIG_ARCH_TEGRA) += tegra/
obj-$(CONFIG_PHY_NS2_PCIE) += phy-bcm-ns2-pcie.o
+obj-$(CONFIG_PHY_QORIQ_USB3) += phy-qoriq-usb3.o
diff --git a/drivers/phy/phy-qoriq-usb3.c b/drivers/phy/phy-qoriq-usb3.c
new file mode 100644
index 0000000..5255089
--- /dev/null
+++ b/drivers/phy/phy-qoriq-usb3.c
@@ -0,0 +1,202 @@
+/*
+ * Freescale QorIQ USB3 phy driver
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Author: Sriram Dash <sriram.dash@....com>
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/phy/phy.h>
+#include <linux/usb/phy.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+#include <linux/usb/of.h>
+#include <linux/regmap.h>
+
+
+/* Parameter control */
+#define USB3PRM1CR 0x000
+#define USB3PRM1CR_VAL 0x27672b2a
+
+/*
+ * struct qoriq_usb3_phy - driver data for USB 3.0 PHY
+ * @dev: pointer to device instance of this platform device
+ * @param_ctrl: usb3 phy parameter control register base
+ * @phy_base: usb3 phy register memory base
+ * @has_erratum_flag: keeps track of erratum applicable on device
+ */
+struct qoriq_usb3_phy {
+ struct device *dev;
+ void __iomem *param_ctrl;
+ void __iomem *phy_base;
+ u32 has_erratum_flag;
+};
+
+static inline u32 qoriq_usb3_phy_readl(void __iomem *addr, u32 offset)
+{
+ return __raw_readl(addr + offset);
+}
+
+static inline void qoriq_usb3_phy_writel(void __iomem *addr, u32 offset,
+ u32 data)
+{
+ __raw_writel(data, addr + offset);
+}
+
+/*
+ * Erratum A008751
+ * SCFG USB3PRM1CR has incorrect default value
+ * SCFG USB3PRM1CR reset value should be 32'h27672B2A instead of 32'h25E72B2A.
+ */
+static void erratum_a008751(struct qoriq_usb3_phy *phy)
+{
+ qoriq_usb3_phy_writel(phy->param_ctrl, USB3PRM1CR,
+ USB3PRM1CR_VAL);
+}
+
+/*
+ * qoriq_usb3_phy_erratum - List of phy erratum
+ * @qoriq_phy_erratum - erratum application
+ * @compat - comapt string for erratum
+ */
+
+struct qoriq_usb3_phy_erratum {
+ void (*qoriq_phy_erratum)(struct qoriq_usb3_phy *phy);
+ char *compat;
+};
+
+/* Erratum list */
+struct qoriq_usb3_phy_erratum phy_erratum_tbl[] = {
+ {&erratum_a008751, "fsl,usb-erratum-a008751"},
+ /* Add init time erratum here */
+};
+
+static int qoriq_usb3_phy_init(struct phy *x)
+{
+ struct qoriq_usb3_phy *phy = phy_get_drvdata(x);
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(phy_erratum_tbl); i++)
+ if (phy->has_erratum_flag & 1 << i)
+ phy_erratum_tbl[i].qoriq_phy_erratum(phy);
+ return 0;
+}
+
+static const struct phy_ops ops = {
+ .init = qoriq_usb3_phy_init,
+ .owner = THIS_MODULE,
+};
+
+static int qoriq_usb3_phy_probe(struct platform_device *pdev)
+{
+ struct qoriq_usb3_phy *phy;
+ struct phy *generic_phy;
+ struct phy_provider *phy_provider;
+ const struct of_device_id *of_id;
+ struct device *dev = &pdev->dev;
+ struct resource *res;
+ int i, ret;
+
+ phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
+ if (!phy)
+ return -ENOMEM;
+ phy->dev = dev;
+
+ of_id = of_match_device(dev->driver->of_match_table, dev);
+ if (!of_id) {
+ dev_err(dev, "failed to get device match\n");
+ ret = -EINVAL;
+ goto err_out;
+ }
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "param_ctrl");
+ if (!res) {
+ dev_err(dev, "failed to get param_ctrl memory\n");
+ ret = -ENOENT;
+ goto err_out;
+ }
+
+ phy->param_ctrl = devm_ioremap_resource(dev, res);
+ if (!phy->param_ctrl) {
+ dev_err(dev, "failed to remap param_ctrl memory\n");
+ ret = -ENOMEM;
+ goto err_out;
+ }
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy_base");
+ if (!res) {
+ dev_err(dev, "failed to get phy_base memory\n");
+ ret = -ENOENT;
+ goto err_out;
+ }
+
+ phy->phy_base = devm_ioremap_resource(dev, res);
+ if (!phy->phy_base) {
+ dev_err(dev, "failed to remap phy_base memory\n");
+ ret = -ENOMEM;
+ goto err_out;
+ }
+
+ phy->has_erratum_flag = 0;
+ for (i = 0; i < ARRAY_SIZE(phy_erratum_tbl); i++)
+ phy->has_erratum_flag |= device_property_read_bool(dev,
+ phy_erratum_tbl[i].compat) << i;
+
+ platform_set_drvdata(pdev, phy);
+
+ generic_phy = devm_phy_create(dev, NULL, &ops);
+ if (IS_ERR(generic_phy))
+ return PTR_ERR(generic_phy);
+
+ phy_set_drvdata(generic_phy, phy);
+
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+ if (IS_ERR(phy_provider))
+ return PTR_ERR(phy_provider);
+
+ return 0;
+err_out:
+ return ret;
+}
+
+static const struct of_device_id qoriq_usb3_phy_dt_ids[] = {
+ {
+ .compatible = "fsl,qoriq-usb3-phy"
+ },
+ {}
+};
+MODULE_DEVICE_TABLE(of, qoriq_usb3_phy_dt_ids);
+
+static struct platform_driver qoriq_usb3_phy_driver = {
+ .probe = qoriq_usb3_phy_probe,
+ .driver = {
+ .name = "qoriq_usb3_phy",
+ .of_match_table = qoriq_usb3_phy_dt_ids,
+ },
+};
+
+module_platform_driver(qoriq_usb3_phy_driver);
+
+MODULE_ALIAS("platform:qoriq_usb3_phy");
+MODULE_AUTHOR("Sriram Dash <sriram.dash@....com>");
+MODULE_DESCRIPTION("Freescale QorIQ USB3 phy driver");
+MODULE_LICENSE("GPL v2");
--
2.1.0
Powered by blists - more mailing lists