| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1479125447-24406-1-git-send-email-andy.yan@rock-chips.com>
Date: Mon, 14 Nov 2016 20:10:47 +0800
From: Andy Yan <andy.yan@...k-chips.com>
To: heiko@...ech.de
Cc: shawn.lin@...k-chips.com, linux-rockchip@...ts.infradead.org,
linus.walleij@...aro.org, linux-gpio@...r.kernel.org,
linux-kernel@...r.kernel.org, Andy Yan <andy.yan@...k-chips.com>
Subject: [PATCH v2 06/10] pinctrl: rockchip: add support for rk1108
This add pinctrl support for Rockchip RK1108 Soc.
Signed-off-by: Andy Yan <andy.yan@...k-chips.com>
---
Changes in v2:
- add pull and drive-strength functionality
drivers/pinctrl/pinctrl-rockchip.c | 87 +++++++++++++++++++++++++++++++++++++-
1 file changed, 86 insertions(+), 1 deletion(-)
diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c
index 49bf7dc..fcc89fb 100644
--- a/drivers/pinctrl/pinctrl-rockchip.c
+++ b/drivers/pinctrl/pinctrl-rockchip.c
@@ -59,6 +59,7 @@
#define GPIO_LS_SYNC 0x60
enum rockchip_pinctrl_type {
+ RK1108,
RK2928,
RK3066B,
RK3188,
@@ -624,6 +625,65 @@ static int rockchip_set_mux(struct rockchip_pin_bank *bank, int pin, int mux)
return ret;
}
+#define RK1108_PULL_PMU_OFFSET 0x10
+#define RK1108_PULL_OFFSET 0x110
+#define RK1108_PULL_PINS_PER_REG 8
+#define RK1108_PULL_BITS_PER_PIN 2
+#define RK1108_PULL_BANK_STRIDE 16
+
+static void rk1108_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,
+ int pin_num, struct regmap **regmap,
+ int *reg, u8 *bit)
+{
+ struct rockchip_pinctrl *info = bank->drvdata;
+
+ /* The first 24 pins of the first bank are located in PMU */
+ if (bank->bank_num == 0) {
+ *regmap = info->regmap_pmu;
+ *reg = RK1108_PULL_PMU_OFFSET;
+ } else {
+ *reg = RK1108_PULL_OFFSET;
+ *regmap = info->regmap_base;
+ /* correct the offset, as we're starting with the 2nd bank */
+ *reg -= 0x10;
+ *reg += bank->bank_num * RK1108_PULL_BANK_STRIDE;
+ }
+
+ *reg += ((pin_num / RK1108_PULL_PINS_PER_REG) * 4);
+ *bit = (pin_num % RK1108_PULL_PINS_PER_REG);
+ *bit *= RK1108_PULL_BITS_PER_PIN;
+}
+
+#define RK1108_DRV_PMU_OFFSET 0x20
+#define RK1108_DRV_GRF_OFFSET 0x210
+#define RK1108_DRV_BITS_PER_PIN 2
+#define RK1108_DRV_PINS_PER_REG 8
+#define RK1108_DRV_BANK_STRIDE 16
+
+static void rk1108_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank,
+ int pin_num, struct regmap **regmap,
+ int *reg, u8 *bit)
+{
+ struct rockchip_pinctrl *info = bank->drvdata;
+
+ /* The first 24 pins of the first bank are located in PMU */
+ if (bank->bank_num == 0) {
+ *regmap = info->regmap_pmu;
+ *reg = RK1108_DRV_PMU_OFFSET;
+ } else {
+ *regmap = info->regmap_base;
+ *reg = RK1108_DRV_GRF_OFFSET;
+
+ /* correct the offset, as we're starting with the 2nd bank */
+ *reg -= 0x10;
+ *reg += bank->bank_num * RK1108_DRV_BANK_STRIDE;
+ }
+
+ *reg += ((pin_num / RK1108_DRV_PINS_PER_REG) * 4);
+ *bit = pin_num % RK1108_DRV_PINS_PER_REG;
+ *bit *= RK1108_DRV_BITS_PER_PIN;
+}
+
#define RK2928_PULL_OFFSET 0x118
#define RK2928_PULL_PINS_PER_REG 16
#define RK2928_PULL_BANK_STRIDE 8
@@ -1123,6 +1183,7 @@ static int rockchip_get_pull(struct rockchip_pin_bank *bank, int pin_num)
return !(data & BIT(bit))
? PIN_CONFIG_BIAS_PULL_PIN_DEFAULT
: PIN_CONFIG_BIAS_DISABLE;
+ case RK1108:
case RK3188:
case RK3288:
case RK3368:
@@ -1169,6 +1230,7 @@ static int rockchip_set_pull(struct rockchip_pin_bank *bank,
spin_unlock_irqrestore(&bank->slock, flags);
break;
+ case RK1108:
case RK3188:
case RK3288:
case RK3368:
@@ -1358,6 +1420,7 @@ static bool rockchip_pinconf_pull_valid(struct rockchip_pin_ctrl *ctrl,
pull == PIN_CONFIG_BIAS_DISABLE);
case RK3066B:
return pull ? false : true;
+ case RK1108:
case RK3188:
case RK3288:
case RK3368:
@@ -1385,7 +1448,6 @@ static int rockchip_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
for (i = 0; i < num_configs; i++) {
param = pinconf_to_config_param(configs[i]);
arg = pinconf_to_config_argument(configs[i]);
-
switch (param) {
case PIN_CONFIG_BIAS_DISABLE:
rc = rockchip_set_pull(bank, pin - bank->pin_base,
@@ -2455,6 +2517,27 @@ static int rockchip_pinctrl_probe(struct platform_device *pdev)
return 0;
}
+static struct rockchip_pin_bank rk1108_pin_banks[] = {
+ PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", IOMUX_SOURCE_PMU,
+ IOMUX_SOURCE_PMU,
+ IOMUX_SOURCE_PMU,
+ IOMUX_SOURCE_PMU),
+ PIN_BANK_IOMUX_FLAGS(1, 32, "gpio1", 0, 0, 0, 0),
+ PIN_BANK_IOMUX_FLAGS(2, 32, "gpio2", 0, 0, 0, 0),
+ PIN_BANK_IOMUX_FLAGS(3, 32, "gpio3", 0, 0, 0, 0),
+};
+
+static struct rockchip_pin_ctrl rk1108_pin_ctrl = {
+ .pin_banks = rk1108_pin_banks,
+ .nr_banks = ARRAY_SIZE(rk1108_pin_banks),
+ .label = "RK1108-GPIO",
+ .type = RK1108,
+ .grf_mux_offset = 0x10,
+ .pmu_mux_offset = 0x0,
+ .pull_calc_reg = rk1108_calc_pull_reg_and_bit,
+ .drv_calc_reg = rk1108_calc_drv_reg_and_bit,
+};
+
static struct rockchip_pin_bank rk2928_pin_banks[] = {
PIN_BANK(0, 32, "gpio0"),
PIN_BANK(1, 32, "gpio1"),
@@ -2684,6 +2767,8 @@ static struct rockchip_pin_ctrl rk3399_pin_ctrl = {
};
static const struct of_device_id rockchip_pinctrl_dt_match[] = {
+ { .compatible = "rockchip,rk1108-pinctrl",
+ .data = (void *)&rk1108_pin_ctrl },
{ .compatible = "rockchip,rk2928-pinctrl",
.data = (void *)&rk2928_pin_ctrl },
{ .compatible = "rockchip,rk3036-pinctrl",
--
2.7.4
Powered by blists - more mailing lists