linux-kernel - [RFC v2 2/2] mmc: sdhci-pci: Use ACPI to get max frequency for Intel byt sdio controller sub-vended by NI

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1479227541-21201-3-git-send-email-zach.brown@ni.com>
Date:   Tue, 15 Nov 2016 10:32:21 -0600
From:   Zach Brown <zach.brown@...com>
To:     <ulf.hansson@...aro.org>
CC:     <adrian.hunter@...el.com>, <linux-mmc@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>, <zach.brown@...com>
Subject: [RFC v2 2/2] mmc: sdhci-pci: Use ACPI to get max frequency for Intel byt sdio controller sub-vended by NI

On NI 9037 boards the max SDIO frequency is limited by trace lengths
and other layout choices. The max SDIO frequency is stored in an ACPI
table.

The driver reads the ACPI entry MXFQ during sdio_probe_slot and sets the
f_max field of the host.

Signed-off-by: Nathan Sullivan <nathan.sullivan@...com>
Reviewed-by: Jaeden Amero <jaeden.amero@...com>
Reviewed-by: Josh Cartwright <joshc@...com>
Signed-off-by: Zach Brown <zach.brown@...com>
---
 drivers/mmc/host/sdhci-pci-core.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c
index 9741505..4c31d16 100644
--- a/drivers/mmc/host/sdhci-pci-core.c
+++ b/drivers/mmc/host/sdhci-pci-core.c
@@ -27,6 +27,7 @@
 #include <linux/pm_runtime.h>
 #include <linux/mmc/slot-gpio.h>
 #include <linux/mmc/sdhci-pci-data.h>
+#include <linux/acpi.h>
 
 #include "sdhci.h"
 #include "sdhci-pci.h"
@@ -377,6 +378,18 @@ static int byt_emmc_probe_slot(struct sdhci_pci_slot *slot)
 
 static int ni_byt_sdio_probe_slot(struct sdhci_pci_slot *slot)
 {
+#ifdef CONFIG_ACPI
+	/* Get max freq from ACPI for NI hardware */
+	acpi_status status;
+	unsigned long long max_freq;
+
+	status = acpi_evaluate_integer(ACPI_HANDLE(&slot->chip->pdev->dev),
+				       "MXFQ", NULL, &max_freq);
+	if (ACPI_FAILURE(status))
+		return -EINVAL;
+
+	slot->host->mmc->f_max = max_freq * 1000000;
+#endif
 	slot->host->mmc->caps |= MMC_CAP_POWER_OFF_CARD | MMC_CAP_NONREMOVABLE |
 				 MMC_CAP_WAIT_WHILE_BUSY;
 	return 0;
-- 
2.7.4