linux-kernel - [PATCH v5 0/2] platform: Add DT support for DA8xx

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1479294456-7942-1-git-send-email-abailon@baylibre.com>
Date:   Wed, 16 Nov 2016 12:07:34 +0100
From:   Alexandre Bailon <abailon@...libre.com>
To:     khilman@...libre.com, robh+dt@...nel.org, b-liu@...com
Cc:     linux-kernel@...r.kernel.org, linux-usb@...r.kernel.org,
        devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        nsekhar@...com, Alexandre Bailon <abailon@...libre.com>
Subject: [PATCH v5 0/2]  platform: Add DT support for DA8xx

This add and enable the usb otg for da850 and da850-lcdk.
This series depends on "driver: dd DT support for DA8xx" patch set.

If this series is applied before the "usb: musb: da8xx: Fix few issues" patch
set then the usb driver will always retrun -ENODEV.

Changes in v2:
* Remove unrelated changes in patch 3
* Rename the device node in patch 4

Changes in v3:
* Fix few mistakes in DT binding sample
* Only build the device table if DT is enabled

Change in v4:
* Fix a nit

Changes in v5:
* Remove usb_phy node from d850.dtsi because it has already been merged.
* Separated the patch in two: one for the board and one for the SoC.

Alexandre Bailon (2):
  ARM: dts: da850: Add the usb otg device node
  ARM: dts: da850-lcdk: Enable the usb otg device node

 arch/arm/boot/dts/da850-lcdk.dts |  8 ++++++++
 arch/arm/boot/dts/da850.dtsi     | 10 ++++++++++
 2 files changed, 18 insertions(+)

-- 
2.7.3