[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1479304148-2965-13-git-send-email-fu.wei@linaro.org>
Date: Wed, 16 Nov 2016 21:49:05 +0800
From: fu.wei@...aro.org
To: rjw@...ysocki.net, lenb@...nel.org, daniel.lezcano@...aro.org,
tglx@...utronix.de, marc.zyngier@....com, mark.rutland@....com,
lorenzo.pieralisi@....com, sudeep.holla@....com,
hanjun.guo@...aro.org
Cc: linux-arm-kernel@...ts.infradead.org, linaro-acpi@...ts.linaro.org,
linux-kernel@...r.kernel.org, linux-acpi@...r.kernel.org,
rruigrok@...eaurora.org, harba@...eaurora.org, cov@...eaurora.org,
timur@...eaurora.org, graeme.gregory@...aro.org,
al.stone@...aro.org, jcm@...hat.com, wei@...hat.com, arnd@...db.de,
catalin.marinas@....com, will.deacon@....com,
Suravee.Suthikulpanit@....com, leo.duran@....com, wim@...ana.be,
linux@...ck-us.net, linux-watchdog@...r.kernel.org,
tn@...ihalf.com, christoffer.dall@...aro.org, julien.grall@....com,
Fu Wei <fu.wei@...aro.org>
Subject: [PATCH v16 12/15] clocksource/drivers/arm_arch_timer: Simplify ACPI support code.
From: Fu Wei <fu.wei@...aro.org>
The patch update arm_arch_timer driver to use the function
provided by the new GTDT driver of ACPI.
By this way, arm_arch_timer.c can be simplified, and separate
all the ACPI GTDT knowledge from this timer driver.
Signed-off-by: Fu Wei <fu.wei@...aro.org>
Signed-off-by: Hanjun Guo <hanjun.guo@...aro.org>
---
drivers/clocksource/arm_arch_timer.c | 55 +++++++++++++-----------------------
1 file changed, 19 insertions(+), 36 deletions(-)
diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index 0836bb9..c494ca8 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -1066,66 +1066,49 @@ static int __init arch_timer_mem_of_init(struct device_node *np)
CLOCKSOURCE_OF_DECLARE(armv7_arch_timer_mem, "arm,armv7-timer-mem",
arch_timer_mem_of_init);
-#ifdef CONFIG_ACPI
-static int __init map_generic_timer_interrupt(u32 interrupt, u32 flags)
-{
- int trigger, polarity;
-
- if (!interrupt)
- return 0;
-
- trigger = (flags & ACPI_GTDT_INTERRUPT_MODE) ? ACPI_EDGE_SENSITIVE
- : ACPI_LEVEL_SENSITIVE;
-
- polarity = (flags & ACPI_GTDT_INTERRUPT_POLARITY) ? ACPI_ACTIVE_LOW
- : ACPI_ACTIVE_HIGH;
-
- return acpi_register_gsi(NULL, interrupt, trigger, polarity);
-}
-
+#ifdef CONFIG_ACPI_GTDT
/* Initialize per-processor generic timer */
static int __init arch_timer_acpi_init(struct acpi_table_header *table)
{
int ret;
- struct acpi_table_gtdt *gtdt;
if (arch_timers_present & ARCH_TIMER_TYPE_CP15) {
pr_warn("already initialized, skipping\n");
return -EINVAL;
}
- gtdt = container_of(table, struct acpi_table_gtdt, header);
-
arch_timers_present |= ARCH_TIMER_TYPE_CP15;
- arch_timer_ppi[ARCH_TIMER_PHYS_SECURE_PPI] =
- map_generic_timer_interrupt(gtdt->secure_el1_interrupt,
- gtdt->secure_el1_flags);
+ ret = acpi_gtdt_init(table);
+ if (ret) {
+ pr_err("Failed to init GTDT table.\n");
+ return ret;
+ }
arch_timer_ppi[ARCH_TIMER_PHYS_NONSECURE_PPI] =
- map_generic_timer_interrupt(gtdt->non_secure_el1_interrupt,
- gtdt->non_secure_el1_flags);
+ acpi_gtdt_map_ppi(ARCH_TIMER_PHYS_NONSECURE_PPI);
arch_timer_ppi[ARCH_TIMER_VIRT_PPI] =
- map_generic_timer_interrupt(gtdt->virtual_timer_interrupt,
- gtdt->virtual_timer_flags);
+ acpi_gtdt_map_ppi(ARCH_TIMER_VIRT_PPI);
arch_timer_ppi[ARCH_TIMER_HYP_PPI] =
- map_generic_timer_interrupt(gtdt->non_secure_el2_interrupt,
- gtdt->non_secure_el2_flags);
-
- /* Get the frequency from CNTFRQ */
- arch_timer_detect_rate(NULL);
+ acpi_gtdt_map_ppi(ARCH_TIMER_HYP_PPI);
ret = arch_timer_uses_ppi_init();
if (ret)
- return ret;
+ goto error;
/* Always-on capability */
- arch_timer_c3stop = !(gtdt->non_secure_el1_flags & ACPI_GTDT_ALWAYS_ON);
+ arch_timer_c3stop = acpi_gtdt_c3stop(arch_timer_uses_ppi);
- arch_timer_init();
- return 0;
+ /* Get the frequency from CNTFRQ */
+ arch_timer_detect_rate(NULL);
+
+ ret = arch_timer_init();
+
+error:
+ acpi_gtdt_release();
+ return ret;
}
CLOCKSOURCE_ACPI_DECLARE(arch_timer, ACPI_SIG_GTDT, arch_timer_acpi_init);
#endif
--
2.7.4
Powered by blists - more mailing lists