linux-kernel - [PATCHv2 3/4] dt: bindings: add new dt entry for BTCOEX feature in qcom,ath10k.txt

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1479383064-25718-4-git-send-email-c_traja@qti.qualcomm.com>
Date:   Thu, 17 Nov 2016 17:14:23 +0530
From:   <c_traja@....qualcomm.com>
To:     <ath10k@...ts.infradead.org>
CC:     <linux-wireless@...r.kernel.org>, <tamizhchelvam@...eaurora.org>,
        <linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <robh@...nel.org>
Subject: [PATCHv2 3/4] dt: bindings: add new dt entry for BTCOEX feature in qcom,ath10k.txt

From: Tamizh chelvam <tamizhchelvam@...eaurora.org>

There two things done in this patch.

1) 'btcoex_support' flag for BTCOEX feature support by the hardware.
2) 'wlan_btcoex_gpio' is used to fill wlan priority pin number for
   BTCOEX priority feature support.

Signed-off-by: Tamizh chelvam <tamizhchelvam@...eaurora.org>
---
 .../bindings/net/wireless/qcom,ath10k.txt          |    4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
index 74d7f0a..08150e2d 100644
--- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
+++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
@@ -46,6 +46,10 @@ Optional properties:
 				 hw versions.
 - qcom,ath10k-pre-calibration-data : pre calibration data as an array,
 				     the length can vary between hw versions.
+- btcoex_support  : should contain eithr "0" or "1" to indicate btcoex
+		    support by the hardware.
+- btcoex_gpio_pin :  btcoex gpio pin number for the device which
+		     supports BTCOEX.
 
 Example (to supply the calibration data alone):
 
-- 
1.7.9.5