| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CANAwSgTB5=8tVj1FrZF3EgjK5mjUMwLYb90NeWSFDCsRjsuB6A@mail.gmail.com>
Date: Thu, 17 Nov 2016 23:30:34 +0530
From: Anand Moon <linux.amoon@...il.com>
To: Jerome Brunet <jbrunet@...libre.com>
Cc: netdev@...r.kernel.org, devicetree <devicetree@...r.kernel.org>,
Florian Fainelli <f.fainelli@...il.com>,
Alexandre TORGUE <alexandre.torgue@...com>,
Neil Armstrong <narmstrong@...libre.com>,
Martin Blumenstingl <martin.blumenstingl@...glemail.com>,
Kevin Hilman <khilman@...libre.com>,
Linux Kernel <linux-kernel@...r.kernel.org>,
Andre Roth <neolynx@...il.com>,
linux-amlogic@...ts.infradead.org, Carlo Caione <carlo@...one.org>,
Giuseppe Cavallaro <peppe.cavallaro@...com>,
linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH net 1/3] net: phy: realtek: add eee advertisement disable options
Hi Jerone,
On 17 November 2016 at 15:50, Jerome Brunet <jbrunet@...libre.com> wrote:
> On Wed, 2016-11-16 at 22:36 +0530, Anand Moon wrote:
>> Hi Jerome.
>>
>> On 15 November 2016 at 19:59, Jerome Brunet <jbrunet@...libre.com>
>> wrote:
>> >
>> > On some platforms, energy efficient ethernet with rtl8211 devices
>> > is
>> > causing issue, like throughput drop or broken link.
>> >
>> > This was reported on the OdroidC2 (DWMAC + RTL8211F). While the
>> > issue root
>> > cause is not fully understood yet, disabling EEE advertisement
>> > prevent auto
>> > negotiation from enabling EEE.
>> >
>> > This patch provides options to disable 1000T and 100TX EEE
>> > advertisement
>> > individually for the realtek phys supporting this feature.
>> >
>> > Reported-by: Martin Blumenstingl <martin.blumenstingl@...glemail.co
>> > m>
>> > Cc: Giuseppe Cavallaro <peppe.cavallaro@...com>
>> > Cc: Alexandre TORGUE <alexandre.torgue@...com>
>> > Signed-off-by: Jerome Brunet <jbrunet@...libre.com>
>> > Signed-off-by: Neil Armstrong <narmstrong@...libre.com>
>> > Tested-by: Andre Roth <neolynx@...il.com>
>> > ---
>> > drivers/net/phy/realtek.c | 65
>> > ++++++++++++++++++++++++++++++++++++++++++++++-
>> > 1 file changed, 64 insertions(+), 1 deletion(-)
>> >
>> > diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
>> > index aadd6e9f54ad..77235fd5faaf 100644
>> > --- a/drivers/net/phy/realtek.c
>> > +++ b/drivers/net/phy/realtek.c
>> > @@ -15,6 +15,12 @@
>> > */
>> > #include <linux/phy.h>
>> > #include <linux/module.h>
>> > +#include <linux/of.h>
>> > +
>> > +struct rtl8211x_phy_priv {
>> > + bool eee_1000t_disable;
>> > + bool eee_100tx_disable;
>> > +};
>> >
>> > #define RTL821x_PHYSR 0x11
>> > #define RTL821x_PHYSR_DUPLEX 0x2000
>> > @@ -93,12 +99,44 @@ static int rtl8211f_config_intr(struct
>> > phy_device *phydev)
>> > return err;
>> > }
>> >
>> > +static void rtl8211x_clear_eee_adv(struct phy_device *phydev)
>> > +{
>> > + struct rtl8211x_phy_priv *priv = phydev->priv;
>> > + u16 val;
>> > +
>> > + if (priv->eee_1000t_disable || priv->eee_100tx_disable) {
>> > + val = phy_read_mmd_indirect(phydev,
>> > MDIO_AN_EEE_ADV,
>> > + MDIO_MMD_AN);
>> > +
>> > + if (priv->eee_1000t_disable)
>> > + val &= ~MDIO_AN_EEE_ADV_1000T;
>> > + if (priv->eee_100tx_disable)
>> > + val &= ~MDIO_AN_EEE_ADV_100TX;
>> > +
>> > + phy_write_mmd_indirect(phydev, MDIO_AN_EEE_ADV,
>> > + MDIO_MMD_AN, val);
>> > + }
>> > +}
>> > +
>> > +static int rtl8211x_config_init(struct phy_device *phydev)
>> > +{
>> > + int ret;
>> > +
>> > + ret = genphy_config_init(phydev);
>> > + if (ret < 0)
>> > + return ret;
>> > +
>> > + rtl8211x_clear_eee_adv(phydev);
>> > +
>> > + return 0;
>> > +}
>> > +
>> > static int rtl8211f_config_init(struct phy_device *phydev)
>> > {
>> > int ret;
>> > u16 reg;
>> >
>> > - ret = genphy_config_init(phydev);
>> > + ret = rtl8211x_config_init(phydev);
>> > if (ret < 0)
>> > return ret;
>> >
>> > @@ -115,6 +153,26 @@ static int rtl8211f_config_init(struct
>> > phy_device *phydev)
>> > return 0;
>> > }
>> >
>> > +static int rtl8211x_phy_probe(struct phy_device *phydev)
>> > +{
>> > + struct device *dev = &phydev->mdio.dev;
>> > + struct device_node *of_node = dev->of_node;
>> > + struct rtl8211x_phy_priv *priv;
>> > +
>> > + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
>> > + if (!priv)
>> > + return -ENOMEM;
>> > +
>> > + priv->eee_1000t_disable =
>> > + of_property_read_bool(of_node, "realtek,disable-
>> > eee-1000t");
>> > + priv->eee_100tx_disable =
>> > + of_property_read_bool(of_node, "realtek,disable-
>> > eee-100tx");
>> > +
>> > + phydev->priv = priv;
>> > +
>> > + return 0;
>> > +}
>> > +
>> > static struct phy_driver realtek_drvs[] = {
>> > {
>> > .phy_id = 0x00008201,
>> > @@ -140,7 +198,9 @@ static struct phy_driver realtek_drvs[] = {
>> > .phy_id_mask = 0x001fffff,
>> > .features = PHY_GBIT_FEATURES,
>> > .flags = PHY_HAS_INTERRUPT,
>> > + .probe = &rtl8211x_phy_probe,
>> > .config_aneg = genphy_config_aneg,
>> > + .config_init = &rtl8211x_config_init,
>> > .read_status = genphy_read_status,
>> > .ack_interrupt = rtl821x_ack_interrupt,
>> > .config_intr = rtl8211e_config_intr,
>> > @@ -152,7 +212,9 @@ static struct phy_driver realtek_drvs[] = {
>> > .phy_id_mask = 0x001fffff,
>> > .features = PHY_GBIT_FEATURES,
>> > .flags = PHY_HAS_INTERRUPT,
>> > + .probe = &rtl8211x_phy_probe,
>> > .config_aneg = &genphy_config_aneg,
>> > + .config_init = &rtl8211x_config_init,
>> > .read_status = &genphy_read_status,
>> > .ack_interrupt = &rtl821x_ack_interrupt,
>> > .config_intr = &rtl8211e_config_intr,
>> > @@ -164,6 +226,7 @@ static struct phy_driver realtek_drvs[] = {
>> > .phy_id_mask = 0x001fffff,
>> > .features = PHY_GBIT_FEATURES,
>> > .flags = PHY_HAS_INTERRUPT,
>> > + .probe = &rtl8211x_phy_probe,
>> > .config_aneg = &genphy_config_aneg,
>> > .config_init = &rtl8211f_config_init,
>> > .read_status = &genphy_read_status,
>> > --
>> > 2.7.4
>> >
>>
>> How about adding callback functionality for .soft_reset to handle
>> BMCR
>> where we update the Auto-Negotiation for the phy,
>> as per the datasheet of the rtl8211f.
>
> I'm not sure I understand how this would help with our issue (and EEE).
> Am I missing something or is it something unrelated that you would like
> to see happening on this driver ?
>
[snip]
I was just tying other phy module to understand the feature.
But in order to improve the throughput I tried to integrate blow u-boot commit.
commit 3d6af748ebd831524cb22a29433e9092af469ec7
Author: Shengzhou Liu <Shengzhou.Liu@...escale.com>
Date: Thu Mar 12 18:54:59 2015 +0800
net/phy: Add support for realtek RTL8211F
RTL8211F has different registers from RTL8211E.
This patch adds support for RTL8211F PHY which
can be found on Freescale's T1023 RDB board.
And added the similar functionality to .config_aneg = &rtl8211f_config_aneg,
And I seem to have better results in through put with periodic drop
but it recovers.
-----
odroid@...oid64:~$ iperf3 -c 10.0.0.102 -p 2006 -i 1 -t 100 -V
iperf 3.0.11
Linux odroid64 4.9.0-rc5-xc2ml #18 SMP PREEMPT Thu Nov 17 22:56:00 IST
2016 aarch64 aarch64 aarch64 GNU/Linux
Time: Thu, 17 Nov 2016 17:35:25 GMT
Connecting to host 10.0.0.102, port 2006
Cookie: odroid64.1479404125.404729.3b45146e7
TCP MSS: 1448 (default)
[ 4] local 10.0.0.105 port 40238 connected to 10.0.0.102 port 2006
Starting Test: protocol: TCP, 1 streams, 131072 byte blocks, omitting
0 seconds, 100 second test
[ ID] Interval Transfer Bandwidth Retr Cwnd
[ 4] 0.00-1.00 sec 114 MBytes 952 Mbits/sec 0 368 KBytes
[ 4] 1.00-2.00 sec 112 MBytes 937 Mbits/sec 0 368 KBytes
[ 4] 2.00-3.00 sec 111 MBytes 935 Mbits/sec 0 368 KBytes
[ 4] 3.00-4.00 sec 112 MBytes 936 Mbits/sec 0 368 KBytes
[ 4] 4.00-5.00 sec 112 MBytes 939 Mbits/sec 0 368 KBytes
[ 4] 5.00-6.00 sec 112 MBytes 936 Mbits/sec 0 368 KBytes
[ 4] 6.00-7.00 sec 111 MBytes 933 Mbits/sec 0 368 KBytes
[ 4] 7.00-8.00 sec 112 MBytes 942 Mbits/sec 0 368 KBytes
[ 4] 8.00-9.00 sec 111 MBytes 935 Mbits/sec 0 368 KBytes
[ 4] 9.00-10.00 sec 111 MBytes 932 Mbits/sec 0 368 KBytes
[ 4] 10.00-11.00 sec 112 MBytes 937 Mbits/sec 0 368 KBytes
[ 4] 11.00-12.00 sec 111 MBytes 935 Mbits/sec 0 368 KBytes
[ 4] 12.00-13.00 sec 112 MBytes 938 Mbits/sec 0 368 KBytes
[ 4] 13.00-14.00 sec 112 MBytes 940 Mbits/sec 0 368 KBytes
[ 4] 14.00-15.00 sec 111 MBytes 934 Mbits/sec 0 368 KBytes
[ 4] 15.00-16.00 sec 111 MBytes 935 Mbits/sec 0 368 KBytes
[ 4] 16.00-17.00 sec 112 MBytes 939 Mbits/sec 0 368 KBytes
[ 4] 17.00-18.00 sec 112 MBytes 936 Mbits/sec 0 368 KBytes
[ 4] 18.00-19.00 sec 111 MBytes 934 Mbits/sec 0 368 KBytes
[ 4] 19.00-20.00 sec 112 MBytes 940 Mbits/sec 0 368 KBytes
[ 4] 20.00-21.00 sec 111 MBytes 933 Mbits/sec 0 368 KBytes
[ 4] 21.00-22.00 sec 112 MBytes 941 Mbits/sec 0 368 KBytes
[ 4] 22.00-23.00 sec 111 MBytes 931 Mbits/sec 0 368 KBytes
[ 4] 23.00-24.00 sec 112 MBytes 938 Mbits/sec 0 368 KBytes
[ 4] 24.00-25.00 sec 112 MBytes 938 Mbits/sec 0 368 KBytes
[ 4] 25.00-26.00 sec 111 MBytes 934 Mbits/sec 0 368 KBytes
[ 4] 26.00-27.00 sec 112 MBytes 940 Mbits/sec 0 368 KBytes
[ 4] 27.00-28.00 sec 112 MBytes 936 Mbits/sec 0 368 KBytes
[ 4] 28.00-29.00 sec 111 MBytes 934 Mbits/sec 0 368 KBytes
[ 4] 29.00-30.00 sec 112 MBytes 937 Mbits/sec 0 368 KBytes
[ 4] 30.00-31.00 sec 111 MBytes 934 Mbits/sec 0 368 KBytes
[ 4] 31.00-32.00 sec 112 MBytes 942 Mbits/sec 0 368 KBytes
[ 4] 32.00-33.00 sec 111 MBytes 933 Mbits/sec 0 368 KBytes
[ 4] 33.00-34.00 sec 111 MBytes 935 Mbits/sec 0 368 KBytes
[ 4] 34.00-35.00 sec 112 MBytes 941 Mbits/sec 0 368 KBytes
[ 4] 35.00-36.00 sec 107 MBytes 896 Mbits/sec 0 368 KBytes
[ 4] 36.00-37.00 sec 0.00 Bytes 0.00 bits/sec 2 1.41 KBytes
[ 4] 37.00-38.00 sec 0.00 Bytes 0.00 bits/sec 1 1.41 KBytes
[ 4] 38.00-39.00 sec 0.00 Bytes 0.00 bits/sec 0 1.41 KBytes
[ 4] 39.00-40.00 sec 38.0 MBytes 319 Mbits/sec 1 385 KBytes
[ 4] 40.00-41.00 sec 112 MBytes 939 Mbits/sec 0 385 KBytes
[ 4] 41.00-42.00 sec 112 MBytes 939 Mbits/sec 0 385 KBytes
[ 4] 42.00-43.00 sec 112 MBytes 937 Mbits/sec 0 385 KBytes
[ 4] 43.00-44.00 sec 111 MBytes 935 Mbits/sec 0 385 KBytes
[ 4] 44.00-45.00 sec 112 MBytes 939 Mbits/sec 0 385 KBytes
[ 4] 45.00-46.00 sec 112 MBytes 939 Mbits/sec 0 385 KBytes
[ 4] 46.00-47.00 sec 111 MBytes 931 Mbits/sec 0 385 KBytes
[ 4] 47.00-48.00 sec 112 MBytes 936 Mbits/sec 0 385 KBytes
[ 4] 48.00-49.00 sec 112 MBytes 939 Mbits/sec 0 385 KBytes
[ 4] 49.00-50.00 sec 112 MBytes 936 Mbits/sec 0 385 KBytes
[ 4] 50.00-51.00 sec 111 MBytes 935 Mbits/sec 0 385 KBytes
[ 4] 51.00-52.00 sec 111 MBytes 934 Mbits/sec 0 385 KBytes
[ 4] 52.00-53.00 sec 112 MBytes 941 Mbits/sec 0 385 KBytes
[ 4] 53.00-54.00 sec 112 MBytes 937 Mbits/sec 0 385 KBytes
[ 4] 54.00-55.00 sec 111 MBytes 930 Mbits/sec 0 385 KBytes
[ 4] 55.00-56.00 sec 112 MBytes 941 Mbits/sec 0 385 KBytes
[ 4] 56.00-57.00 sec 112 MBytes 936 Mbits/sec 0 385 KBytes
[ 4] 57.00-58.00 sec 111 MBytes 933 Mbits/sec 0 385 KBytes
[ 4] 58.00-59.00 sec 111 MBytes 935 Mbits/sec 0 385 KBytes
[ 4] 59.00-60.00 sec 112 MBytes 940 Mbits/sec 0 385 KBytes
[ 4] 60.00-61.00 sec 112 MBytes 936 Mbits/sec 0 385 KBytes
[ 4] 61.00-62.00 sec 111 MBytes 935 Mbits/sec 0 385 KBytes
[ 4] 62.00-63.00 sec 111 MBytes 935 Mbits/sec 0 385 KBytes
[ 4] 63.00-64.00 sec 112 MBytes 938 Mbits/sec 0 385 KBytes
[ 4] 64.00-65.00 sec 111 MBytes 932 Mbits/sec 0 385 KBytes
[ 4] 65.00-66.00 sec 112 MBytes 940 Mbits/sec 0 385 KBytes
[ 4] 66.00-67.00 sec 112 MBytes 938 Mbits/sec 0 385 KBytes
[ 4] 67.00-68.00 sec 111 MBytes 934 Mbits/sec 0 385 KBytes
[ 4] 68.00-69.00 sec 111 MBytes 933 Mbits/sec 0 385 KBytes
[ 4] 69.00-70.00 sec 112 MBytes 937 Mbits/sec 0 385 KBytes
[ 4] 70.00-71.00 sec 111 MBytes 935 Mbits/sec 0 385 KBytes
[ 4] 71.00-72.00 sec 112 MBytes 941 Mbits/sec 0 385 KBytes
[ 4] 72.00-73.00 sec 111 MBytes 933 Mbits/sec 0 385 KBytes
[ 4] 73.00-74.00 sec 112 MBytes 939 Mbits/sec 0 385 KBytes
[ 4] 74.00-75.00 sec 111 MBytes 934 Mbits/sec 0 385 KBytes
[ 4] 75.00-76.00 sec 111 MBytes 934 Mbits/sec 0 385 KBytes
[ 4] 76.00-77.00 sec 112 MBytes 937 Mbits/sec 0 385 KBytes
[ 4] 77.00-78.00 sec 112 MBytes 938 Mbits/sec 0 385 KBytes
[ 4] 78.00-79.00 sec 111 MBytes 935 Mbits/sec 0 385 KBytes
[ 4] 79.00-80.00 sec 111 MBytes 934 Mbits/sec 0 385 KBytes
[ 4] 80.00-81.00 sec 112 MBytes 939 Mbits/sec 0 385 KBytes
[ 4] 81.00-82.00 sec 112 MBytes 936 Mbits/sec 0 385 KBytes
[ 4] 82.00-83.00 sec 111 MBytes 934 Mbits/sec 0 385 KBytes
[ 4] 83.00-84.00 sec 112 MBytes 937 Mbits/sec 0 385 KBytes
[ 4] 84.00-85.00 sec 111 MBytes 935 Mbits/sec 0 385 KBytes
[ 4] 85.00-86.00 sec 112 MBytes 937 Mbits/sec 0 385 KBytes
[ 4] 86.00-87.00 sec 112 MBytes 939 Mbits/sec 0 385 KBytes
[ 4] 87.00-88.00 sec 111 MBytes 935 Mbits/sec 0 385 KBytes
[ 4] 88.00-89.00 sec 112 MBytes 937 Mbits/sec 0 385 KBytes
[ 4] 89.00-90.00 sec 112 MBytes 936 Mbits/sec 0 385 KBytes
[ 4] 90.00-91.00 sec 112 MBytes 937 Mbits/sec 0 385 KBytes
[ 4] 91.00-92.00 sec 111 MBytes 934 Mbits/sec 0 385 KBytes
[ 4] 92.00-93.00 sec 112 MBytes 939 Mbits/sec 0 385 KBytes
[ 4] 93.00-94.00 sec 111 MBytes 935 Mbits/sec 0 385 KBytes
[ 4] 94.00-95.00 sec 112 MBytes 936 Mbits/sec 0 385 KBytes
[ 4] 95.00-96.00 sec 112 MBytes 936 Mbits/sec 0 385 KBytes
[ 4] 96.00-97.00 sec 112 MBytes 936 Mbits/sec 0 385 KBytes
[ 4] 97.00-98.00 sec 113 MBytes 945 Mbits/sec 0 559 KBytes
[ 4] 98.00-99.00 sec 112 MBytes 937 Mbits/sec 0 559 KBytes
[ 4] 99.00-100.00 sec 111 MBytes 928 Mbits/sec 0 559 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
Test Complete. Summary Results:
[ ID] Interval Transfer Bandwidth Retr
[ 4] 0.00-100.00 sec 10.5 GBytes 902 Mbits/sec 4 sender
[ 4] 0.00-100.00 sec 10.5 GBytes 902 Mbits/sec receiver
CPU Utilization: local/sender 5.6% (0.2%u/5.4%s), remote/receiver
17.1% (1.2%u/15.9%s)
Can your confirm this at your end.
Once confirm I will try to send this as a fix for this issue.
-Best Regards
Anand Moon
Powered by blists - more mailing lists