[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20161117204043.wz66gpsb4y2pt7yu@lukather>
Date: Thu, 17 Nov 2016 21:40:43 +0100
From: Maxime Ripard <maxime.ripard@...e-electrons.com>
To: Chen-Yu Tsai <wens@...e.org>
Cc: Linus Walleij <linus.walleij@...aro.org>,
Klaus Goger <klaus.goger@...obroma-systems.com>,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, linux-sunxi@...glegroups.com
Subject: Re: [PATCH] ARM: dts: sunxi: Explicitly enable pull-ups for MMC pins
On Thu, Nov 17, 2016 at 05:34:38PM +0800, Chen-Yu Tsai wrote:
> In the past, all the MMC pins had
>
> allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>
> which was actually a no-op. We were relying on U-boot to set the bias
> pull up for us. These properties were removed as part of the fix up to
> actually support no bias on the pins. During the transition some boards
> experienced regular MMC time-outs during normal operation, while others
> completely failed to initialize the SD card.
>
> Given that MMC starts in open-drain mode and the pull-ups are required,
> it's best to enable it for all the pin settings.
>
> Signed-off-by: Chen-Yu Tsai <wens@...e.org>
Applied, thanks.
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
Download attachment "signature.asc" of type "application/pgp-signature" (802 bytes)
Powered by blists - more mailing lists